Be the first to know when kits are listed!
Plastic Model Kit, Box Condition: Sealed Exc
$32
Still factory sealed. This is a 2011 reissue from the original 1970s molds and even uses the original box art. Features more than 100 parts and fits any of the AMT semi tractor models. Features fully detailed F-2 Tandem suspension, operating "Select-A-Point" sliding suspension, air brake system with flexible lines, 'Spyder' Spoke dual wheel assemblies, mud guards, rear doors that open realistically, detailed floor and interior walls, two position support assembly either 'raised' or lowered for static display and more. Molded in white, chrome plate, red-tinted clear, amber-tinted clear, flexible lines and with rubber tires & metal axles.
Plastic Model Kit, Box Condition: Sealed NM
$32
Still factory sealed. 2018 issue from the original 1970s molds. Very highly detailed and large kit which is scaled from the manufacturers drawings and measuring over 19 inches long. Features over 150 parts, opening rear doors, sliding overhead section, full suspension, two position stands and more. Molded in white, amber-tinted clear, red-tinted clear, chrome plate and with rubber tires and flexible tubing. Includes an expanded decal sheet with Wilson, 'Cattle Bus' and other trailer markings.
Plastic Model Kit, Box Condition: Sealed Exc+
$38
Still factory sealed. This is a 2018 reissue from the original 1970s molds but with a colorful Coca-Cola decal sheet. Features more than 100 parts and fits any of the AMT semi tractor models. Features fully detailed F-2 Tandem suspension, operating "Select-A-Point" sliding suspension, mud guards, rear doors that open realistically, detailed floor and interior walls, two position support assembly either 'raised' or lowered for static display and more. Molded in white, chrome plate, red-tinted clear, amber-tinted clear and with rubber tires & metal axles.
Plastic Model Kit, Box Condition: Sealed NM
$95
Still factory sealed. This is the 2014 reissue from the original 1970s molds. Highly detailed with well over 100 parts. Over 16 inches long when built and attaches to any of the AMT tractors. Features super detailed two-spring rockerbeam suspension on a twelve-tire, three axle system, three payload transformers, four small insulators, three cable reels with supports, cable beam, two location flags and more. Molded in white, chrome plate, red-tinted clear and with rubber tires and metal axles. There is a greatly expanded decal sheet with this newer issue.
Plastic Model Kit, Box Condition: VG++
$48
Rare early issue from about 1970. Molded in white and green-tint clear plastic and contains decals for all the starships from the series. Never started. Inventoried and the actual USS Enterprise is complete with all parts and 'excellent' condition decals and correct old instructions. However, NOTE: missing (2) display stand parts: one stand arm and cross brace. Can be made from stock plastic sheet.
Plastic Model Kit, Box Condition: Sealed VG+
$64
Still factory sealed. The only injection molded kit in 1/72 of the futuristic Mach 3 jet bomber. Very large model measures over 31 inches in length when assembled and features highly detailed cockpit and ejection seat escape system, landing gear and gear wells and YJ-93 Turbojet engines with afterburners. Includes large color poster of the XB-70 and a gold plated name plate.
Plastic Model Kit, Box Condition: Good
$36
1970s issue featuring optional position cabin doors, full interior, pilot figure, detailed engine and exhaust ring as well as full decals. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions. The famous and beautiful gull-winged SR-9 was the 1937 version of the SR series which began in 1933 and continued in production until 1941. The aircraft was popular and saw use as personal transports and executive planes. Five passenger could be seated in deluxe accommodations. The military used 45 privately owned SRs during WWII. Today this aircraft is very valuable and sought after by collectors and restorers.
Plastic Model Kit, Box Condition: Sealed Exc+
$14
Still factory sealed. Features over 80 pieces, good cockpit & gear well detail, AIM-120 and AIM-9 missiles and more. Includes paint and decals for the prototype aircraft shown on the box art.
Plastic Model Kit, Box Condition: Sealed NM
$35
Still factory sealed. This modern reissue is from the excellent original molds and features more than 230 parts and measures more than 2.5 feet in length when built. Features two vans with authentic converter dolly with fifth wheel coupler for 'train' configuration, detailed suspension, TODCO overhead operating sliding doors, adjustable landing gear, hollow rubber tires and CF decals for your trailers AND a semi tractor so you can have a completely 'CF- Consolidated Freight' consist.
Plastic Model Kit, Box Condition: Sealed VG
$26
Still factory sealed and dated 1994. Very finely molded and detailed kit that features over 100 pieces, correct parts so you can model a C-4 or C-6 variant, all recessed panel lines, very good cockpit, full armament, radar array and more. Includes decals for all three aircraft listed.
Plastic Model Kit, Box Condition: VG
$68
Rare original issue from late 1965/1966; even rarer in this condition, which is never started and 100% complete. Very well detailed and features numerous optional parts to build one of three versions, detailed engine and compartment, removable hoods (three different options), detailed underside, full interior and much more. Molded in gloss white, chrome plate, clear, red-tinted clear, rubber tires and with metal axles. Never started and inventoried complete with all parts and includes decals and instructions. Please NOTE that there are two tire burns: one is on an inner wheel and does not show when it is assembled; the other is on the custom grille.
Plastic Model Kit, Box Condition: Good-
$30
2018 reissue of this classic model. Features all parts for stock versions, many customizing parts and more. Molded in white, plastic, chrome plate and with rubber tires. The kit has never been started. The parts that were factory sealed are still in the sealed bags. The parts that were not factory sealed have been inventoried complete including decals and instructions.
Plastic Model Kit, Box Condition: Sealed VG+
$56
1970s issue that is still factory sealed. This model features detailed engine and engine compartment, opening hood, full interior with opening doors, positionable front wheels, stock and custom bumpers and headlight and more. Molded in colored plastic, clear, red-tinted clear, chrome plate and with rubber tires and metal axles.
Plastic Model Kit, Box Condition: Sealed VG
$46
Still factory sealed. Features full engine detail, transaxle assembly, removable hood, underside detail, complete interior and more.
Plastic Model Kit, Box Condition: VG+
$29
1970s T issue that can built one of two ways. Features detailed engine compartment and opening hood, full interior, detailed molded chassis, numerous custom parts and more. Never started. The parts that were factory sealed are still in the factory sealed bag. The parts that were never factory sealed (chrome & clear) have been inventoried complete. Includes decals and instructions.
Plastic Model Kit, Box Condition: Exc
$34
Very nicely detailed kit. Features 80 parts, detailed engine and compartment, underside and suspension and interior. Has opening hood, real rubber tires and optional ZR-1 decals. Molded in white, chrome, clear, red-tinted clear and with rubber tires. The model has not been started. The parts are either in factory sealed bag(s) or inventoried 100% complete with all parts, decals and instructions.
Plastic Model Kit, Box Condition: Sealed Good
$48
Still factory sealed but the seal has shrunk and drawn the box top concave as shown. This reissue dated 2008 features more than 230 parts and measures more than 2.5 feet in length when built. Features two vans with authentic converter dolly with fifth wheel coupler for 'train' configuration, detailed suspension, TODCO overhead operating sliding doors, adjustable landing gear, hollow rubber tires and CF decals for your trailers AND a semi tractor.
Plastic Model Kit, Box Condition: Sealed Exc++
$32
Still factory sealed. Very well detailed kit of this unique trailer made for variable long loads. Features voer 150 pieces, woodgrained trailer bed which extends from 19 3/16" to 31 3/16", adjustable rear suspension to suite the load, front landing gear snaps up or down and can be built with either wheels or sandshoes, removable front bulkhead with grab handles, detailed scuff rails have open pockets so you tie down the scale load, chrome spoked wheels, Goodyear tires and more. Molded in white and black and includes an extensive decal sheet.
Plastic Model Kit, Box Condition: Sealed Exc
$95
Very rare original issue and even rarer in this investment-grade 'Factory Sealed Excellent" condition. This radical custom van features special body, numerous custom parts, detailed Ford 351 CID V-8 engine, opening hood, detailed chassis, interior and even a detailed model of a Honda Trail Bike which stows on the six-wheelers 'back porch.'
Plastic Model Kit, Box Condition: Sealed Good-
$85
Still factory sealed. This is the very rare original issue and not the common reissue. The seal has a split on the lower center. This is the highly detailed release marketed as AMT/Matchbox with the AMT part number 5008 and Matchbox PK-8405.