Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Special Hobby Phonix D-II Austro-Hungarian WWI Fighter - (D.II), 1/48, SH48036

Plastic Model Kit,   Box Condition: Sealed Exc+

Sold   

Still factory sealed. Hard-to-find. Very neatly molded and nicely detailed model.

Tekin Team Tekin BC67 Digital Peak Charger And Cobra Super-Bug Electronic Battery Dischargers (5 Pack), TEKBC76

Other Materials,   Box Condition: Sealed NM

Sold   

Still factory sealed- both items. Cobra Super-Bug Dischargers are part number E1018R. The Tekin Charger is USA made, can run off AC or DC, has a built in 5 amp 120 V AC power supply, 0-5 amp linear output charge current, large and easy to read LCD display, multiple charge modes, Cold Start for discharged packs, all digital circuitry that is microprocessor controlled, compact, lightweight with true high quality heavy duty design.

Revell Arado Ar. E555 Jet Bomber - (Ar-555), 1/72, 04367

Plastic Model Kit,   Box Condition: Sealed Exc

Sold   

Still factory sealed. From 1998. Out of production kit of Arado's entry in the 'New York Bomber' design category. With 6 engines, this aircraft still would have had the range to hit New York with 4000kg of bombs and return. Very well detailed and features fine, all recessed panel lines, highly detailed landing gear wells and bomb bay, full cockpit with four crew stations, rotating gun turrets with elevating guns, optional position landing gear, bomb load, optional position bomb bay doors and more.

Lindberg F/A-18 Hornet from the Movie Independence Day ID4, 1/72, 77313

Plastic Model Kit,   Box Condition: Good+

Sold   

1/72 Hornet kit released as a tie-in with the famous motion picture. Never started. Inventoried 100% complete with all parts decals and instructions.

Tamiya British Army Saladin MkII Armored Car - Motorized, 1/35, MT108

Plastic Model Kit,   Box Condition: VG+

Sold   

Very nicely detailed kit that is fully motorized. Includes Mabuchi 130 electric motor still in the original and colorful box, full gear box, tan injection molded parts, real rubber tires and decals for several units. The kit has never been started. Internal factory sealed bags including decals and instructions.

Peerless-Max Dodge 3/4 Ton WC-56 / WC-57 Light Truck - Command and Reconnaissance Truck and 1 Ton 250 Gallon Ben Hur KWT Water Tanker, 1/35, 3505

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Still factory sealed. Features wel detailed molding, rolling chassis build just like the real truck, complete suspension, driveline and exhaust details, complete interior, crew of three, optional raised top or lowered top, 1 Ton 250 Gallon Ben Hur KWT Water Tanker, optional parts to build WC-56 or 57 and more.

Midwest T-Bird (Tbird) - 39 inch Wingspan Aircraft for Sport or Competition Free Flight, FG-7

Wood Model Kit,   Box Condition: Exc

Sold   

Built for 'Sniffing Thermals', the honored pastime of a generation of flying model enthusiasts. Flying model aircraft predated powered flight; however, balsa wood and printwood were not introduced until the early 1930s and the hobby took off, as well as the hunt for thermals. Gas flight began in the early 1930s, and early gas powered models, all powered by Brown engines, took home so many awards that they were forever separated in competition from rubber powered models. Design of gas models was tricky since RC (radio control) model could not yet be applied to the mass market; so a gas model had to not only fly and climb under power, but then glide sufficiently - all without any operator inputs once the airplane took off. Getting the wing up out of the propeller airflow was a huge improvement, and this type of design proliferated. This is one example of a parasol style 1940s free-flight competition aircraft designed by Russ Hansen. Quality kit includes printwood, strip wood, wheels, tissue and beautiful full size plans. The model has not been started. The parts are either in factory sealed bag(s) or inventoried 100% complete with all parts and instructions.

Hasegawa Republic P-47D Razorback - 'Turtle No.9', 1/72, 1161

Plastic Model Kit,   Box Condition: Exc++

Sold   

Very well molded and includes colorful markings for the box art aircraft. This kit has not been started. Inventoried 100% complete with all parts, decals and instructions.

Hasegawa Heinkel He-51B-2 or A-1 Float Plane, 1/72, JS-053-130

Plastic Model Kit,   Box Condition: Exc

Sold   

Well molded model that builds the float plane variant with parts for A-1 or B-2. NOTE: this kit has minor, 'professional' quality subassembly as follows: seat to floor and floor assembled to one fuselage half; prop retainer to prop shaft. There is no other assembly. Inventoried 100% complete with all parts, decals and instructions present.

Airfix 1926 Morris Cowley, 1/32, 02450-7

Plastic Model Kit,   Box Condition: Sealed Exc++

Sold   

Still factory sealed. From the very late 1970s/early 1980s. Nicely done and detailed kit for that time.

Airfix Douglas A-20 Havoc (Boston) - USAirfix Issue, 1/72, 30010

Plastic Model Kit,   Box Condition: Good

Sold   

1979 issue that features movable rudder, elevator and ailerons, crew and cockpit, movable propellers & wheels and USAAF markings as shown on the box top model. NOTE: this kit has very minor, 'professional' quality subassembly as follows: two bulkheads glued to floor. Third bulkhead glued to inside fuselage half. There is no other assembly. Inventoried 100% complete with all parts, decals and instructions present. Please NOTE that the box displays better than the 'good' grade but is rated as such because there is a stain on the right short side.

Tamiya German Horch 1a with 2cm Flak38, 1/35, MM105

Plastic Model Kit,   Box Condition: Good

Sold   

Includes vehicle and flak gun, crew of 5 and accessory parts. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Tamiya KV-II Gigant, 1/35, 35063

Plastic Model Kit,   Box Condition: Sealed Exc++

Sold   

Still factory sealed.

Pocher Rolls Royce 1932 Phantom II Sedanca Coupe, 1/8

Multimedia Model Kit,   Box Condition: VG++ Internally Sealed

Sold   

This kit is still factory sealed inside. When you lift the lid, the lower box is still completely sealed with Pocher factory tape. Pocher made the finest automobile models ever created. The detail and working parts on these long out-of-production kits is amazing. This kit has over 2100 parts of plastic, brass, steel, leather, iron, rubber, copper and many more. Working features include brake pedal operates brakes on all four wheels - emergency brake lever operates rear brakes on an independent system - operating steering - working suspension - lights that operate from the dashboard - doors that open and close with operating door latches and handles - windows that raise and lower with the working cranks - the starting handle operates the crankshaft, connecting rods, pistons, V-belts, fan, dynamo, etc in the engine - roll back top - and much more. Recommended for experienced models only. NOTE: This is the version with most realistic but complex wheel construction. Each wheel consists of well over 100 parts with individual spoke placement.

Matchbox Dornier-Dassault Alpha Jet - Luftwaffe or French Air Force Prototypes, 1/72, 40005

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Still factory sealed. Dated 1983. Has markings for both air forces prototype aircraft.

RN Models 1912 Leveque Flying Boat - 33 Inch Wingspan Scale Flyer, UA413

Wood Model Kit,   Box Condition: Exc

Sold   

Excellent kit of this free-flight or R/C design for gas or electric engines. Features high quality balsa printwood, stripwood and spars, many other wood parts cut to shape, balsa stock, metal stock and hardware, instructions and full size plans. The kit has never been started. The parts that were factory sealed are still in the sealed bags. The parts that were not factory sealed have been inventoried complete including plans/instructions.

AeroGraphics 1913 Eastbourne Monoplane - 19 Inch Wingspan Flying Aircraft Rubber / CO2 / Electric Power

Wood Model Kit,   Box Condition: NM

Sold   

Superb flying model that can be powered three ways. Features high quality printwood sheets, factory cut stripwood and spars, all required metal hardware, plastic prop and thrust button, vacuform clear wheels and pilot, covering tissue, full size plans with detailed building and flying information and more. The kit has never been started. The parts that were factory sealed are still in the sealed bags. The parts that were not factory sealed have been inventoried complete including decals and instructions.

Bluetank Alligator LVT(A)5 - (LVT) (ex Nitto), 1/35, TK-9001

Plastic Model Kit,   Box Condition: VG+

Sold   

From the original Nitto molds. Very nicely detailed and features over 120 pieces, working wheels, flexible tracks, opening front hatches, 3 crew, rotating turret with elevating gun and more. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.

FM LCVP Landing Craft D-Day, 1/35, 8001

Plastic Model Kit,   Box Condition: Sealed Exc

Sold   

Still factory sealed. Very large scale (1/35) model with very good detail. Includes injection molded parts, cast metal machine guns/details and cast resin parts. Has decals for D-Day and French Algeria landings from 1953.

Italeri StuG IV Sturmgeschutz IV German Assault Gun, 1/35, 6223

Plastic Model Kit,   Box Condition: Sealed Exc+

Sold   

Still factory sealed.