Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale.

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Revell Brewster Buffalo F2A USN - Great Britain Issue, 1/72, H636

Plastic Model Kit,   Box Condition: VG+++

Sold   

1960s smaller box Revell of Great Britain kit in condition. Classic box art of the Buffalo departing from a Lexington-Class Carrier in early configuration. This kit has the three-piece canopy that opens, pilot and seat, detailed engine and optional position landing gear. Never started. Inventoried 100% complete with all parts, decals and instructions.

Revell USS Fletcher DD-445 - Flanker Series, 1/301, H371-150

Plastic Model Kit,   Box Condition: Sealed Mint

Sold   

This kit is still factory sealed and dates from 1964. The box features framable John Steele artwork. Large and detailed full-hull kit builds up to almost 15" long.

Hasegawa Focke-Wulf FW-190A-8 - with Eagle Editions FW-190A-9 Conversion kit 2/JG54 Lt. Hans Dortenmann France June 1944 or 9/JG5 Feldwebel Rudolf Artner Norway February 1945, 1/32, 08071

Plastic Model Kit,   Box Condition: Exc++

Sold   

Includes #50-32 Eagle Editions Ltd conversion to make a FW-190A into an A-9. Conversion includes finely resin cast correct 10mm cowl ring and correct 14 blade cooling fan. The kit is the 2004 Issue with all new tooling. Very well molded and highly detailed. All fine recessed panel lines. Includes decals for both aircraft listed. The kit has never been started. It is complete with all parts needed to build this exact kit. Decals and instructions are as new. NOTE: the extra parts that Hasegawa left on the trees that do not go with this kit have been removed from the kit.

Aeroclub (4) Hamilton Standard 3 Blade Two Position 9'6 Diameter Propellers, 1/72, AP003

Metal Model Kit,   Box Condition: Exc++

Sold   

Factory new. Very clean castings. Never started and complete.

Aeroclub Night Fighter Antenna for Junkers Ju-88 G-1/G-6, 1/72

Metal Model Kit,   Box Condition: Bagged

Sold   

Features proper thickness photoetched parts and full instructions for G-1 or G-6 Antennas. Never used and complete with instructions.

Model Technologies British World War I Seat Belts With Buckles - Bagged, 1/72

Metal Model Kit,   Box Condition: Bagged

Sold   

Very highly detailed photo-etched seat belts with full instructions. Never used and complete.

Aeroclub Pratt & Whitney R1830 Twin Wasp Engine, 1/72, E043

Metal Model Kit,   Box Condition: Bagged

Sold   

Two-piece version as shown. Very highly detailed all-metal castings makes an excellent upgrade to your model. Superior in detail to plastic injection molded engines. Never used and complete.

Aeroclub Pratt & Whitney Twin Wasp Engine (Late), 1/72, E043

Metal Model Kit,   Box Condition: Bagged

Sold   

Very highly detailed all-metal casting makes an excellent upgrade to your model. Superior in detail to plastic injection molded engines. Never used and complete.

Aeroclub Rolls Royce Merlin VIII / X / XX / 22 Engine, 1/72, E052

Metal Model Kit,   Box Condition: Bagged

Sold   

Very highly detailed all-metal casting makes an excellent upgrade to your model. Superior in detail to plastic injection molded engines. Never used and complete.

Aeroclub Siemens Halske 11 Cylinder Rotary Engine and Propeller - World War I, 1/72, E029

Metal Model Kit,   Box Condition: Bagged

Sold   

Very highly detailed all-metal casting makes an excellent upgrade to your model. Superior in detail to plastic injection molded engines. Never used and complete.

Novo Vickers Vimy Mk IV Heavy Bomber - (Ex-Frog), 1/72, F163

Plastic Model Kit,   Box Condition: Good++

Sold   

From quality ex-Frog molds. Please note that this is the wartime version with the guns and bombs and not the post-war transatlantic version. The 'gun & bomb' version has become somewhat harder to find. The kit has never been started. Internal factory sealed bag including decals and instructions.

Aurora-KB De Havilland DH-10A, 1/48, 1125-300

Plastic Model Kit,   Box Condition: Poor

Sold   

1972 hardbox issue. Ideal builder kit. This is the modified mold issue which is a more realistic model to build. Includes terrain display base and rigging instructions. Never started. Missing rear windshield, which is a simple flat piece. I have included thick, clear styrene so you can make this part. Otherwise inventoried with all other parts, decals and instructions. NOTE: decals have bug damage. The actual transfers are still undamaged - the bugs only ate the backing paper. Box would grade higher but the top side panel is missing.

Hasegawa North American B-25J Mitchell, 1/72, E16

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Still factory sealed. From 2003. Very finely molded and detailed with 132 pieces.

Entex MG TC Sports Car, 1/16, 8223

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Still factory sealed. Very highly detailed large scale model. Features metal hood hinges, fully detailed chassis, engine and interior with very well molded wire wheels. Top can be up or down. Molded in silver, tan, red, black, chrome, clear plastic and rubber.

Scale Flight Comet's Boeing P-26 Peashooter - 16 inch Wingspan Dime Scale Flying Airplane, Dime

Wood Model Kit,   Box Condition: NM

Sold   

Scale Flight Model Company in Bloomington, Indiana, USA was dedicated to releasing authentic reproductions of the finest "Dime Scale" flying model (stick and tissue) kits from the 1930s/40s. Dime Scale models used to sell for a dime in the 1930's, hence the name. They are actually box scale, but as a general guideline, they usually had a wingspan of 16 inches and have simple and light construction. "Dime Scale" models are now a class flown in some competitions. Kit consists of contest grade printwood, contest quality strip wood, machine cut balsa propeller, the best Japanese tissue, wooden wheels, competition bushed nose plug, brass thrust washers, prop shaft, prop freewheeler, FAI rubber strip motor and a copy of a genuine dime scale plan that was used in the 1930s-1940s. The model has not been started. The parts are either in factory sealed bag(s) or inventoried 100% complete with all parts and instructions.

Kitty Hawk Mirage F.1B (F-1B) - With PE Parts, 1/48, KH80112

Plastic Model Kit,   Box Condition: NM

Sold   

Superb kit from all new molds. Excellent detail inside and out. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Mach 2 Sud Se-210 Caravelle III or IVR - Air France / United Air Lines / French Air Force No. 234 Bretigny '78 / Air Inter 1967 / Swedish Air Force No. 172 '73, 1/72

Plastic Model Kit,   Box Condition: Exc

Sold   

The only 1/72 scale model of one of the most beautiful airliners ever made. Molded with all fine recessed panel lines, full cockpit, complete passenger interior, clear side and cockpit windows, optional position rear boarding stairs and roll-up ramp stairs. Has decals and parts for all versions listed. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Academy Grumman TBF-1 Avenger - USN, 1/72, 1651

Plastic Model Kit,   Box Condition: Exc

Sold   

From 1987. Very nicely molded kit. Features very fine recessed panel lines, detailed cockpit, optional position landing gear and rotating turret with elevating gun. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Rareplane FMA IA-58 Pucara (IA/58), 1/72

Vacuform Model Kit,   Box Condition: Exc

Sold   

Very good quality vacuform kit with moldings better than many older injection molded models. Features very fine raised detail, clear canopies and instructions/plans as well as paint and marking guide. Never started. Complete with all parts and plans. Significant modeling skill is required to build vacuform kit. Not recommended for beginners.

Rareplane Vought-Sikorsky SB2U-1 Vindicator - (SB2U1), 1/72

Vacuform Model Kit,   Box Condition: Exc

Sold   

Very high quality vacuform kit with moldings equal to or better than many injection molded models. Features very fine detail, complete cockpit, clear canopy, markings and painting guide and instructions/plans. NOTE: a professional vacuform builder has cut the parts out very neatly. A great many of them have been sanded and fit professionally but only 1/2 the cockpit and a drop tank have been built. Those who build vacuforms know that this is hours of work and represents a significant time savings when done right, which it is. Inventoried with all parts and instructions present. Significant modeling skill is required to build vacuform kit. Not recommended for beginners.