Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

  Lindberg Model Kits

Lindberg Convair 880 TWA Jetliner, 1/189, 452-49

Plastic Model Kit,   Box Condition: Sealed VG

$65   

Still factory sealed. Rare late 1950s issue. This is the only issue with the classic Ray Gaedke box artwork. Has very fine raised panel detail and can be built wheels up or down. Includes full TWA decals. The box would grade better than 'sealed vg' but the side panels have creasing.

Lindberg Convair 880 TWA Jetliner, 1/189, 409-50

Plastic Model Kit,   Box Condition: VG

$28   

1960s hardbox issue. Can be built wheels up or down and comes with full, nicely done TWA decals and a display stand. Very fine raised panel detail. Box artwork is by Tom Morgan, who did most if not all of this issue of the Lindberg small airliners. The kit has never been started. Inventoried 100% complete including decals and instructions.

Lindberg North American F-100 Super Sabre, 1/48, 528-98

Plastic Model Kit,   Box Condition: VG

$65   

1950s hardbox issue with incredible Ray Gaedke artwork. Large 1/48 scale F-100 with movable rudder, elevators and ailerons, detailed ejection seat and pilot, full jet engine detail and opening engine access hatch and a load-out of two drop tanks and 8 missiles. Includes colorful decals for the box art aircraft. The kit has never been started. Inventoried 100% complete including decals and instructions. NOTE: the backing paper of the decals has damage on a small area where it was once stuck to the instructions. The actual transfers have no damage. There is a corresponding area on the instructions as well.

Lindberg Satellite With Three Stage Launching Rocket, 1004-98

Plastic Model Kit,   Box Condition: VG+

$265   

Rare first issue kit from the 1950s. Fantastic Ray Gaedeke box artwork. Kit can be taken apart and reassembled to show each mission stage. Features detailed satellite payload with clear housing as shown on box top, three separate stages with engines, clear rocket engine housings for stage one and two, loading truck and four rocket supports for display. Includes a very large and colorful decal sheet with all the markings shown on the rocket on the right of the box top. Molded in gloss silver and clear. The kit has never been started. Inventoried 100% complete including decals and instructions. Decals and instructions are 'excellent'.

Lindberg Grumman F6F-5 Hellcat - (F6F5), 1/72, 484-60

Plastic Model Kit,   Box Condition: Good++

$22   

1967 hardbox issue with artwork by Lacina. Never started. Inventoried 100% complete with all parts, decals and instructions. Lindberg is a company with a fascinating history The original 'Lindberg Line' stretches back to the 1930s when Paul Lindberg drew plans for famous modeling magazines and marketed his balsa wood 'stick and tissue' by urging dealers to carry the '...Complete Lindberg Line'. After the war, Lindberg and Olsen had a strong hand in early United States injection molded kit development. Please see the article located on this website about early USA plastic kit manufacturers.

Lindberg F4U-5N Corsair - (F4U5N), 1/48, 512-98

Plastic Model Kit,   Box Condition: Exc++

$68   

Late 1950s issue with classic Ray Gaedke Box art. This issue shares the last O-lin boxart for the Corsair. Kit has not been started and has been inventoried 100% complete.

Lindberg Republic P-47N Thunderbolt, 1/48, 511

Plastic Model Kit,   Box Condition: Exc++

$89   

Rare 1st issue small hardbox from 1952 in 'excellent ++' condition. Has like-new color and gloss, four solid corners, light wear as shown, circle logo and Ray Gaedke artwork. The box almost seems to small for this large 1/48 scale kit - and it is a tight fit. Molded in the correct early light gloss gray and clear. There are panel lines but very minimal rivet detail; later issues had heavy rivet detail added. Never started. Inventoried 100% complete with all parts, decals and instructions. This kit started as a basic 1/48 scale model with full landing gear, rockets and bombs. Surface detail was minimal Lindberg modified it in the mid 1950s with extensive rivet detail. in the late 1950s, they modified it again to a motorized version with the batteries in the stand and a kit electric motor in the nose. Lindberg is a company with a fascinating history The original 'Lindberg Line' stretches back to the 1930s when Paul Lindberg drew plans for famous modeling magazines and marketed his balsa wood 'stick and tissue' by urging dealers to carry the '...Complete Lindberg Line'. After the war, Lindberg and Olsen had a strong hand in early United States injection molded kit development. Please see the article located on this website about early USA plastic kit manufacturers.

Lindberg Blitz - 18 inch Wingspan Rubber Powered Plastic Flying Airplane Model, 926-100

Vacuform Model Kit,   Box Condition: Sealed NM

$125   

Still factory sealed. Very rare. Fantastic artwork by Ray Gaedke. The box is in exceptional near mint condition. In the late 1950s/early 1960s, Lindberg came out with a complete line of vacuformed rubber powered flying models. The kits were all prepainted, had large wingspans and were quite attractive for flying models. They also included the rubber band, spring wire landing gear and injection molded wheels, propeller and bushing. The instructions are on the back along with a detailed trim/adjustment guide for flying.

Lindberg Convair 880 Airliner - TWA or MEA (Middle East Airlines Lebanon) - Mexican Issue, 1/189, 409

Plastic Model Kit,   Box Condition: Sealed Exc++

$54   

Still factory sealed. Rare Mexican-Lindberg issue that includes colorful TWA and MEA decals. Can be built wheels up or down. Very fine raised panel detail. Box artwork is by Tom Morgan, who did most if not all of this issue of the Lindberg small airliners.

Lindberg Cadet - Rubber Powered Plastic Flying Airplane Model, 925-100

Vacuform Model Kit,   Box Condition: NM

$125   

Very rare. Fantastic artwork by Ray Gaedke. The box is in exceptional near mint condition. In the late 1950s/early 1960s, Lindberg came out with a complete line of vacuformed rubber powered flying models. The kits were all prepainted, had large wingspans and were quite attractive for flying models. They also included the rubber band, spring wire landing gear and injection molded wheels, propeller and bushing. The kit has never been started. Internal factory sealed bag or inventoried 100% complete including instructions, which are on the back along with an adjustment guide for flying.

Lindberg Convair 880 TWA Jetliner, 1/189, 409-60

Plastic Model Kit,   Box Condition: Sealed Mint

$48   

Still factory sealed but the seal has splits. Late 1960s kit. Can be built wheels up or down and comes with full TWA decals and a display stand. Very fine raised panel detail. Box artwork is by Tom Morgan, who did most if not all of this issue of the Lindberg small airliners.

Lindberg Benny Howard's 'Pete' - 1930s Thompson Trophy Racer - One Piece Box Issue, 1/48, 25-301

Plastic Model Kit,   Box Condition: Exc++

$145   

Very rare kit for the advanced collector. First Lindberg issue in a one piece box. Dates from the early 1950s. Molded in unique gloss light green and includes the early unique 'Circle' two piece stand.. The box is in excellent condition and carries the circular Lindberg first logo. The instructions are on the back and Lindberg did not issue the kit with decals. The kit has never been started and is complete.

Lindberg Knight Twister - One Piece Box Issue, 1/48, 25-304

Plastic Model Kit,   Box Condition: Exc+++

$145   

Very rare kit for the advanced collector. First Lindberg issue in a one piece box. Dates from the early 1950s. Molded in unique gloss light green and includes the early unique 'Circle' two piece stand.. The box is in excellent condition and carries the circular Lindberg first logo. The instructions are on the back and Lindberg did not issue the kit with decals. The kit has never been started and is complete.

Lindberg Dornier Do-335 Arrow, 1/72, 438-60

Plastic Model Kit,   Box Condition: Sealed Mint

$29   

Still factory sealed. 1966 hardbox issue with Tom Morgan boxart.

Lindberg Benny Howard's 'Pete' - 1930s Thompson Trophy Racer - Cellovision Issue, 1/48, 419-29

Plastic Model Kit,   Box Condition: Sealed VG-

$52   

Still factory sealed. Late 1950s Cellovision issue with a clear panel on the front and a color trading card on the back. Classic artwork by Ray Gaedke. Larger 1/48 scale kit of this famous racer designed by Benny Howard.

Lindberg Grumman F6F-5 Hellcat - (F6F5), 1/72, 484-60

Plastic Model Kit,   Box Condition: Exc++

$28   

1967 hardbox issue with artwork by Lacina. Never started. Factory sealed bag or inventoried 100% complete with all parts, decals and instructions. Lindberg is a company with a fascinating history The original 'Lindberg Line' stretches back to the 1930s when Paul Lindberg drew plans for famous modeling magazines and marketed his balsa wood 'stick and tissue' by urging dealers to carry the '...Complete Lindberg Line'. After the war, Lindberg and Olsen had a strong hand in early United States injection molded kit development. Please see the article located on this website about early USA plastic kit manufacturers.

Lindberg Dornier Do-335 Arrow, 1/72, 438-50

Plastic Model Kit,   Box Condition: NM

$26   

1966 hardbox issue with Tom Morgan boxart. Never started. Factory sealed bag or inventoried 100% complete with all parts, decals and instructions. Lindberg is a company with a fascinating history The original 'Lindberg Line' stretches back to the 1930s when Paul Lindberg drew plans for famous modeling magazines and marketed his balsa wood 'stick and tissue' by urging dealers to carry the '...Complete Lindberg Line'. After the war, Lindberg and Olsen had a strong hand in early United States injection molded kit development. Please see the article located on this website about early USA plastic kit manufacturers.

Lindberg Nautilus Atomic Submarine, 704

Plastic Model Kit,   Box Condition: VG++

$145   

Rare first issue hardbox with script Lindberg logo. In the 1930s, Paul Lindberg was designing, building and flying stick and tissue aircraft like so many other men and boys of the time. His plans appear in Popular Aviation magazine and he made a good name for himself. When injection molding showed the way to increased kits sales in the late 1940s/early 1950s, he quickly teamed up with Mr. Olsen to create 'O-lin' models. Ray Gaedke was one the early artists for O-lin. In the early 1950s Paul Lindberg had control and had his name as the logo. The first logo is the one on this kit - 'Lindberg' in script with 'Products' arched across the top and 'Incorporated' arched across the bottom to create a broken circle around the script. Ray Gaedke continued his bold and colorful artwork for Lindberg, such as the box painting for the Nautilus here. The Nautilus appears to be the first sea vessel that Lindberg cut it's own molds for - the Chris Craft Express Cruiser, PT Boat, LST and Fleet Submarine (Ex-Varney) were done by O-lin. The model is an interesting work of fact and fiction - it includes a deck gun and what looks like a Regulus II missile for the deck! The scale is not known but it measures about 12 inches long when assembled. The model has never been started. Factory sealed bag or inventoried 100% complete with all parts, decals and instructions.

Lindberg Mars Probe Communications Satallite, 1/200, 1150-150

Plastic Model Kit,   Box Condition: Exc

$185   

Rare second issue dated 1969 with unique hardbox artwork. The original issue was from the late 1950s. Molded in correct white with clear green tinted parts. Features three state rocket that snaps apart, cargo loading truck, interior fuel tank, and detailed removable satellite with removable cover and interior instrument group. Never started. All parts still sealed in the factory bag and complete with all decals and instructions.

Lindberg Focke Wulf FW-190D-9 - (FW190D9), 1/72, 433-29

Plastic Model Kit,   Box Condition: Exc++++

$28   

One-piece soft box dated 1965. This box is in excellent condition which is most unusual for these thin boxes. Never started. Factory sealed bag or inventoried 100% complete with all parts, decals and instructions.