Monogram Fokker D-VII - (DVII), 1/48, 5203
Plastic Model Kit, Box Condition: VG
Sold
When Monogram bought the Aurora molds in the mid 1970s, they reissued the kits that were the most accurate. Since Aurora had reworked the molds on the DVII, this was one that was chosen. Builds a very nice kit. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Tamiya Lockheed Martin F-16C Block 25/32 Fighting Falcon ANG, 1/48, 61101
Plastic Model Kit, Box Condition: NM
Sold
Dated 2008. This is a beautiful, highly detailed kit with all fine recessed panel lines, full cockpit, optional position canopy, superb intake and gear wells, pilot figure, extensive weapons loadout and more. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Berkut Mig-29 Fulcrum / Su-35 / Eastern Express Mig-31B Foxhound / Mig-31BM Foxhound, 1/72, 72-001
Plastic Model Kit, Box Condition: Good to Sealed VG
Sold
SALE!! Includes all four kits. The Mig-31B is still factory sealed. The other three kits are never started and inventoried complete with all parts and includes decals and instructions. NOTE: the Su-35 decals are lifting.
Berkeley Aeronca C-3 - 36 Inch Wingspan Flying Aircraft For R/C or Free Flight, 1/12, 4-12
Wood Model Kit, Box Condition: Good++
Sold
Big 1/12 scale model with a 36 inch wingspan. Originally designed as a gas powered model for free flight or control line, it can be converted to electric power and modern RC (radio control) gear if you wish. Features covering material, decals, full size plans, formed wire parts, die cut balsa and plywood parts, many factory cut blocks, fully formed wooden wheels, clear canopy material, factory cut spars & stringers and more. The model has not been started. The parts are inventoried 100% complete and includes decals and instructions. Berkeley is a very famous manufacturer of flying model kits from the Golden Age of flying aviation, about 1932-1954. Founded in 1933 by William Effinger, the company was quite progressive in producing quality kits - it was likely the Berkeley 'Buccaneer' was the first gas powered model in kit form. In the later 1930s, Effinger acquired the services of a very talented Henry Struck. Struck went on to design numerous award-winning kits under the Berkeley name. Berkeley weathered the post WWII recession and emerged as a major kit producer in the late 1940 and 1950s. These were great years for Berkeley and they produced some incredible and large kits. The company went bankrupt in about 1960 however. Fox engines (Duke Fox) bought the company and released the kits alongside his own FOX models and engines. This arrangement did not last, and in the early 1960s the Berkeley name disappeared from hobby shop shelves.
Aoshima London Black Cab - London Taxi / London Cab, 1/24, 68
Plastic Model Kit, Box Condition: VG++
Sold
This is a well detailed model that features an excellent full interior, good underside & chassis, extensive clear parts for every lens on the car, one piece engine compartment with good detail, flexible wiring & engine (top), opening hood, steerable wheels and more. The extensive decal sheet even includes gauge faces. Molded in gloss black (body, hood & wheels), medium gray, clear, chrome plate and with rubber tires. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Renwal 1929 Ford Model A - O Scale, 1/48, 145
Plastic Model Kit, Box Condition: Sealed Exc
Sold
Still factory sealed and from the late 1960s/early 1970s. This is one of a wonderful and extensive line of 1/48 car kits from Renwal. They are perfect as a stand-alone models or for use in 1/48 dioramas and O Scale train layouts. Renwal did an excellent job on engineering & detail and they feature full interior, body and chassis parts molded in the proper colors as well as clear, chrome and/or brass plated and with real rubber tires. There is no painting required. The instructions include a history of the automobile.
Hobbico Superstar 40 ARF - 60 Inch Wingspan Almost Ready To Fly R/C Aircraft, HCAA2055
Wood Model Kit, Box Condition: VG++
Sold
**SAVE! Pick up in Lexington, KY and eliminate all shipping charges. I can meet you at our local Panera Bread for delivery.** This is a large, approximately 90% finished RC model that is truly 'Almost Ready To Fly.' Never started. Inside, everything is exactly as it left the factory. All of the parts that were factory sealed still are and the few that were never sealed have been inventoried complete. Includes all paperwork. NOTE: this kit came in a very sturdy and thick cardboard box. It will ship in that box wrapped in thick brown paper. If you wish for it to be placed inside another box, let me know in the 'comments' section of checkout but be aware that additional shipping charges will apply.
Tamiya Matra MS11, 1/12, 12005
Plastic Model Kit, Box Condition: VG
Sold
Very highly detailed, large scale kit. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Tamiya Martini Porsche 935 Turbo With Photo-Etched Parts, 1/12, 12057
Plastic Model Kit, Box Condition: Exc+
Sold
Rare and super-detailed kit inside and out. Features numerous PE parts on a large fret for brake discs, side radiator parts, bonnet catch and much more, fully detailed working coil spring suspension front and rear, scale steering box and all linkage with working steering, complete engine down to cables, fuel and ignition lines, some of the most detailed drive shafts I have ever seen in this scale, full race cockpit with cloth seat belts & PE buckles and detail down to the hand brake lever and it's cable, properly corrugated scale flexible brake cooling ducts, roll cage, oil cooler, oil tank, oil catch tank, water tank, battery, fire extinguisher, washer reserve tank, variable stabilizer (with wiring), gas tank with wiring/tubing, side radiators, opening doors, hood and trunk and much more. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Tamiya Rover Mini Cooper 1.3i, 1/12, 12031
Plastic Model Kit, Box Condition: Exc
Sold
From 1995. Quality kit that is well detailed inside and out. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
KSN Midori Kawasaki N1K2 George - Motor Drives Prop and Wheel and Wing Navigation Lights Work, 1/28, 800-05
Plastic Model Kit, Box Condition: VG
Sold
Very rare. Large 1/28 scale motorized kit with many working features. A factory-assembled metal gear box with nylon gears is driven by a common FA-130 motor. The gearbox spins the propeller and drives the tail wheel, moving the aircraft across any smooth surface while the red and green wing navigation light blink on and off. Factory glue is included as well as all running hardware and lights. Please note that KSN did not furnish the motor with the kit. Features hidden battery compartment (where the real engine would be), moving rudder, elevator, ailerons and wing flaps and an opening canopy. The kit has never been started. Inside it is just as it left the factory. The small parts, gearbox, lights and glue are still factory sealed. The plastic parts that were factory sealed are still sealed in the original clear bags; the few large parts that were never sealed (wings and fuselage) are inventoried compete. The checkerboard cardboard presentation material and large full-color card showing aircraft and famous pilots is in very good condition. Includes instructions and decals in 'very good++' condition. Please NOTE that the box displays slightly better than 'very good' but is graded as such because there is a tape tear on the left short side. There is a color cardboard advertisement inside showing that KSN Midori also made the following car kits: 1/16 1904 Wolseley, 1/16 1904 De Dion Bouton, 1/20 1907 Itala Pechino Parigi and a 1/24 1910 Chitty Chitty Bang Bang.
Nichimo IJN Atago Heavy Cruiser, 1/500
Plastic Model Kit, Box Condition: VG
Sold
Early issue from the 1960s. Nichimo created an excellent line of unique 1/500 scale battleship and heavy cruiser models; the earliest ones have no part number and rare glossy box art from the 'Golden Age' of Japanese model kit illustrations. This model can be built for operation in water or static full hull or waterline versions. Very well detailed and molded for that time and features a Mabuchi FA-13 electric motor in the original, colorful Mabuchi box, a metal & brass gearbox for dual propeller drive, u-joints, brass battery contacts and switch, metal propeller shaft, one piece lower hull (molded in the correct 'IJN Hull Red'), one piece upper hull (molded in gray), detailed deck and superstructure, rotating main turrets and separately molded secondary battery and AA guns, catapults, floatplanes and more. Never started. The plastic parts are still in the internal factory sealed bags; the hardware parts have been inventoried and NOTE: missing one metal shaft and 2 U-joints (which are nothing but rubber tubing); otherwise compete. Includes the silver and gold foil covered cardboard name display card and instructions. Please note that Nichimo did not supply decals with this issue.
Otaki Panzer IV German Tank Motorized With Working Gun - (Type IV), 1/45, OV-22
Plastic Model Kit, Box Condition: Exc+
Sold
Very, very rare. From the early 1960s. Has the unique combination of motorized drive wheels and flexible treads and a firing gun. The gun fires a plastic bullet via a spring and trigger hidden in and below the barrel. The box is the high-gloss early style with attractive artwork. It is in excellent condition with like new color and gloss, no price tags or tape and no marks from either, four solid corners, no tears and no fading. The flaws are light shelf wear and light creasing. A very nicely detailed kit for that time and appears to be well engineered. Features a factory sealed bag of hardware including all-metal gear box, wire, motor mount, switches, battery racks, shafts, spring, screws and more. Please note that Otaki did not furnish the motor, which is recommended to be the common TKK Mabuchi RE-14. The tank is molded in dark olive drab and has the drive on the rear drive wheels which moves the caterpillar treads. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions. Amazingly, the treads are 100% intact, completely flexible and are still bound by the factory rubber bands! NOTE: this kit must be shipped insured.
Special Hobby PT-26 Cornell Trainer - USAAF 1943 or RCAF 'Little Norway' base at Toronto Canada for Training Norwegian Pilots between August 1942 and July 1944 -BAGGED, 1/72, SH72038
Multimedia Model Kit, Box Condition: No Box
Sold
NOTE: bagged kit; there is no box. The box is shown for reference only. Still the only 1/72 scale injection molded model of this classic trainer. This is a well molded limited issue with all fine recessed panel lines, resin and many photoetched details, excellent cockpit and more. Includes decals for two aircraft. Never started and inventoried complete with all parts and includes decals and instructions.
Bandai Field Work Accessory Date Palm, 1/48, 8231-125
Plastic Model Kit, Box Condition: Good+
Sold
Excellent accessory model and ideal for 1/48 scale dioramas. Includes three date palm trees and base. The trees are molded in brown and the fine, flexible palms in green. Never started. The parts are still in the internal factory sealed bags and includes instructions.
Aurora USS Enterprise Carrier CV-6 WWII, 1/600, 714
Plastic Model Kit, Box Condition: Good-
Sold
This is the 1972 release from the same molds as the original 1959 issue. It is one of the few injection molded kits of the historical CV-6 - The US Navy's Most Decorated Ship. This full-hull model features a detailed island structure, 5" and small AA batteries, pre-war 'EN' flight deck markings, aircraft and display stand. Never started and inventoried complete with all parts and includes decals, flag sheet and instructions.
Rarejets Republic F-84G Thunderjet - Bagged, 1/72
Vacuform Model Kit, Box Condition: Good-
Sold
Still in the factory sealed bag. This is a very high quality vacuform kit with moldings equal to or better than many injection molded models. Features very fine detail, complete cockpit, clear canopy (mint condition and not yellowed), markings and painting guide and instructions/plans. Significant modeling skill is required to build vacuform kit. Not recommended for beginners.
Revell Chevrolet Camaro SS 350, 1/32, H1251-100
Plastic Model Kit, Box Condition: VG
Sold
Dated 1968. This model is part of a very popular 1/32 scale series of car kits issued by Revell in the late 1960s/early 70s. They made idea conversions to slot car racers; Revell even issued some of them that way. this model is the standard version and eatures a one-piece detailed body, clear windshield, full interior, chassis with molded in detail, many chrome parts and black rubber tires. The body parts are molded in gloss medium blue. Never started and inventoried complete with all parts and includes instructions.
WK Models TWO Blohm & Voss BV-40 And Stummelhabicht Double Kit, 1/72, 48001
Multimedia Model Kit, Box Condition: Exc
Sold
SALE! Includes two of each glider for a total of four gliders. Never started. Inventoried and NOTE: missing the two tiny clear windscreens (easily made) for the two Stummelhabichts. Otherwise complete with all other parts, decals and instructions present. These are fine injection molded kits that feature recessed surface detail, basic cockpit, landing skids (BV-40 and Stummelhaicht), ground dolly (BV-40), clear vacuform canopies (mint and not even yellowed (BV-40) and more. Includes complete decals for both gliders and an excellent paint guide.
Huma Model DFS-228 - Rocket Powered High Altitude Reconnaissance Aircraft, 1/72, 3503
Plastic Model Kit, Box Condition: Good
Sold
Rare injection molded kit. Features fine, all recessed panel lines, highly detailed cockpit module, landing skid, parts for joining the aircraft to a 1/72 Do-217 K-3, full size color drawings, markings for civil and military versions and full instructions with fascinating history notes. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions. The DFS-228 was to operate at 23,000 meters (over 75,400 feet) where enemy interception was impossible. Flight profile was to be as follow: take off in a Mistel combination with a Do-217. At about 33,000 feet the '228 would separate by firing it's Walter liquid-fuel rocket engine. Within 5 minutes, it would be at over 75,000 ft. The actual recon task would then take place under powerless flight while powerful Zeiss infra-red cameras took photos. The aircraft would then glide another 750 km before reaching the original release height, then another 350 km after that, giving plenty of time to reach friendly territory and again making interception difficult if not impossible. Extraordinary protection had to be given to the pilot at such altitudes. His pressure cabin could, in an emergency, be blown free with four explosive bolts. After the separated front module reached a safe altitude where the pilot could survive without oxygen, the pilot was ejected through the front windscreen and a parachute deployed. By the end of the war several prototypes had been built. Flight testing, however, was only performed in non-powered glides from a maximum altitude of 10,000 meters.