Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Revell Heinkel He-115 C-1 - 3/Ku.Fl.Gr 106 Luftflotte 2 France Late 1940 Night Operations / 1/Ku.Fl.Gr 906 Luftflotte 5 Pori Finland 1942, 1/72, 04342

Plastic Model Kit,   Box Condition: Good

Sold   

1993 Revell of Germany issue. Very nicely molded with very fine raised panel lines and recessed control surfaces. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions. Please note that the box displays much better than the 'good' grad but is rated as such because there is a large tear and missing design section on the left short side flap.

Tamiya British Army Saladin MkII Armored Car - Motorized, 1/35, MT108

Plastic Model Kit,   Box Condition: VG+

Sold   

Very nicely detailed kit that is fully motorized. Includes Mabuchi 130 electric motor still in the original and colorful box, full gear box, tan injection molded parts, real rubber tires and decals for several units. The kit has never been started. Internal factory sealed bags including decals and instructions.

Peerless-Max Dodge 3/4 Ton WC-56 / WC-57 Light Truck - Command and Reconnaissance Truck and 1 Ton 250 Gallon Ben Hur KWT Water Tanker, 1/35, 3505

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Still factory sealed. Features wel detailed molding, rolling chassis build just like the real truck, complete suspension, driveline and exhaust details, complete interior, crew of three, optional raised top or lowered top, 1 Ton 250 Gallon Ben Hur KWT Water Tanker, optional parts to build WC-56 or 57 and more.

Midwest T-Bird (Tbird) - 39 inch Wingspan Aircraft for Sport or Competition Free Flight, FG-7

Wood Model Kit,   Box Condition: Exc

Sold   

Built for 'Sniffing Thermals', the honored pastime of a generation of flying model enthusiasts. Flying model aircraft predated powered flight; however, balsa wood and printwood were not introduced until the early 1930s and the hobby took off, as well as the hunt for thermals. Gas flight began in the early 1930s, and early gas powered models, all powered by Brown engines, took home so many awards that they were forever separated in competition from rubber powered models. Design of gas models was tricky since RC (radio control) model could not yet be applied to the mass market; so a gas model had to not only fly and climb under power, but then glide sufficiently - all without any operator inputs once the airplane took off. Getting the wing up out of the propeller airflow was a huge improvement, and this type of design proliferated. This is one example of a parasol style 1940s free-flight competition aircraft designed by Russ Hansen. Quality kit includes printwood, strip wood, wheels, tissue and beautiful full size plans. The model has not been started. The parts are either in factory sealed bag(s) or inventoried 100% complete with all parts and instructions.

Hasegawa Republic P-47D Razorback - 'Turtle No.9', 1/72, 1161

Plastic Model Kit,   Box Condition: Exc++

Sold   

Very well molded and includes colorful markings for the box art aircraft. This kit has not been started. Inventoried 100% complete with all parts, decals and instructions.

Hasegawa Heinkel He-51B-2 or A-1 Float Plane, 1/72, JS-053-130

Plastic Model Kit,   Box Condition: Exc

Sold   

Well molded model that builds the float plane variant with parts for A-1 or B-2. NOTE: this kit has minor, 'professional' quality subassembly as follows: seat to floor and floor assembled to one fuselage half; prop retainer to prop shaft. There is no other assembly. Inventoried 100% complete with all parts, decals and instructions present.

Hasegawa Grumman F9F-8 Cougar - VF-81/ VT-26 / Blue Angels (F9F8), 1/72, 1139

Plastic Model Kit,   Box Condition: VG++

Sold   

Very nicely molded kit. Has decals for all three aircraft - VF-81 all black aircraft, VT-26 Trainer and the famous Blue Angels. NOTE: this kit has very minor, 'professional' quality subassembly as follows: nose gear well, bulkhead and instrument panel assembled. Seat halves built but seat not installed. There is no other assembly. Inventoried 100% complete with all parts, decals and instructions present.

Airfix 1926 Morris Cowley, 1/32, 02450-7

Plastic Model Kit,   Box Condition: Sealed Exc++

Sold   

Still factory sealed. From the very late 1970s/early 1980s. Nicely done and detailed kit for that time.

Airfix Douglas A-20 Havoc (Boston) - USAirfix Issue, 1/72, 30010

Plastic Model Kit,   Box Condition: Good

Sold   

1979 issue that features movable rudder, elevator and ailerons, crew and cockpit, movable propellers & wheels and USAAF markings as shown on the box top model. NOTE: this kit has very minor, 'professional' quality subassembly as follows: two bulkheads glued to floor. Third bulkhead glued to inside fuselage half. There is no other assembly. Inventoried 100% complete with all parts, decals and instructions present. Please NOTE that the box displays better than the 'good' grade but is rated as such because there is a stain on the right short side.

Hobby Boss YF-23, 1/48, 81722

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Still factory sealed. A very nice kit from all new molds.

Tamiya German Horch 1a with 2cm Flak38, 1/35, MM205

Plastic Model Kit,   Box Condition: Good

Sold   

Includes vehicle and flak gun, crew of 5 and accessory parts. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Tamiya KV-II Gigant, 1/35, 35063

Plastic Model Kit,   Box Condition: Sealed Exc++

Sold   

Still factory sealed.

Pocher Rolls Royce 1932 Phantom II Sedanca Coupe, 1/8

Multimedia Model Kit,   Box Condition: VG++ Internally Sealed

Sold   

This kit is still factory sealed inside. When you lift the lid, the lower box is still completely sealed with Pocher factory tape. Pocher made the finest automobile models ever created. The detail and working parts on these long out-of-production kits is amazing. This kit has over 2100 parts of plastic, brass, steel, leather, iron, rubber, copper and many more. Working features include brake pedal operates brakes on all four wheels - emergency brake lever operates rear brakes on an independent system - operating steering - working suspension - lights that operate from the dashboard - doors that open and close with operating door latches and handles - windows that raise and lower with the working cranks - the starting handle operates the crankshaft, connecting rods, pistons, V-belts, fan, dynamo, etc in the engine - roll back top - and much more. Recommended for experienced models only. NOTE: This is the version with most realistic but complex wheel construction. Each wheel consists of well over 100 parts with individual spoke placement.

RN Models 1912 Leveque Flying Boat - 33 Inch Wingspan Scale Flyer, UA413

Wood Model Kit,   Box Condition: Exc

Sold   

Excellent kit of this free-flight or R/C design for gas or electric engines. Features high quality balsa printwood, stripwood and spars, many other wood parts cut to shape, balsa stock, metal stock and hardware, instructions and full size plans. The kit has never been started. The parts that were factory sealed are still in the sealed bags. The parts that were not factory sealed have been inventoried complete including plans/instructions.

AeroGraphics 1913 Eastbourne Monoplane - 19 Inch Wingspan Flying Aircraft Rubber / CO2 / Electric Power

Wood Model Kit,   Box Condition: NM

Sold   

Superb flying model that can be powered three ways. Features high quality printwood sheets, factory cut stripwood and spars, all required metal hardware, plastic prop and thrust button, vacuform clear wheels and pilot, covering tissue, full size plans with detailed building and flying information and more. The kit has never been started. The parts that were factory sealed are still in the sealed bags. The parts that were not factory sealed have been inventoried complete including decals and instructions.

Tamiya M21 Half Track 81mm Mortar Carrier, 1/35, MM183

Plastic Model Kit,   Box Condition: Sealed Exc

Sold   

Still factory sealed but the seal has split has shown. Well detailed kit with a combat crew of 4 and numerous accessories.

Bluetank Alligator LVT(A)5 - (LVT) (ex Nitto), 1/35, TK-9001

Plastic Model Kit,   Box Condition: VG+

Sold   

From the original Nitto molds. Very nicely detailed and features over 120 pieces, working wheels, flexible tracks, opening front hatches, 3 crew, rotating turret with elevating gun and more. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.

FM LCVP Landing Craft D-Day, 1/35, 8001

Plastic Model Kit,   Box Condition: Sealed Exc

Sold   

Still factory sealed. Very large scale (1/35) model with very good detail. Includes injection molded parts, cast metal machine guns/details and cast resin parts. Has decals for D-Day and French Algeria landings from 1953.

Italeri StuG IV Sturmgeschutz IV German Assault Gun, 1/35, 6223

Plastic Model Kit,   Box Condition: Sealed Exc+

Sold   

Still factory sealed.

Trumpeter CV-3 USS Saratoga Aircraft Carrier 1930s Configuration, 1/700, 05738

Plastic Model Kit,   Box Condition: NM

Sold   

Very highly detailed, modern model with 375 parts and can be built as a full hull model or waterline, with display bases for each. The all-biplane, yellow-wing air group includes nine BFC-2, nine SBU Helldivers, nine F3F, and six TG-2. Includes an excellent decal sheet for the ship and aircraft. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.