Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale.

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

AMT Thunderbolt II Monster Truck, 1/25, 6931

Plastic Model Kit,   Box Condition: Sealed VG+

$65   

Still factory sealed. Dated 1989. Very nicely detailed kit with over 130 parts. Features full engine, interior and chassis detail. Molded in colored plastic, clear, chrome plate and with rubber tires.

Yellow Wings 48-004 Pre WWII 1931-41 Scale Black and White Pin Stripes / 48-002 Pre WWII 1937-41 USN TBD-1 Devastator 12 Section Leaders Aircraft VT-3 (Sara) and VT-6 (Enterprise) / 48-025 USMC 1932-42 Standard 12, 1/48

Other Materials,   Box Condition: Sealed VG+

$29   

Possibly the ultimate decal set for your 1/48 Devastator project. All four decal sets are in mint, never used condition and fresh from climate-controlled storage.

ESCI B-24 Liberators Rage In Heaven/Strawberry Bitch/Minnesota Mauler/Nose Art/The Goon/Well Developed/We'll Get By/Arkansas Traveler / Phantoms F-4B USMC / F-4E USAF and Israeli DF / RF-4B USMC / RF-4E Luftwaffe / TBD Devastator VT-2 Lexington / VT-3 Saratoga, 1/72

Other Materials,   Box Condition: Sealed VG+

$18   

All three very colorful decal sheets are never used and fresh from climate-controlled storage. All include full color painting and marking guides. Due to age there is very slight yellowing; to remove this, support them in a sunny window for a week or so. Please see the articles (located on this website) about saving and using older decals.

Yellow Wings US Navy 1941 The Planes Of The Movie, 1/48, 48-050

Other Materials,   Box Condition: Sealed VG+

$32   

Rare. This is a huge 8 sheet set so you can decorate any of the 1/48 aircraft listed as they were in the historic movie "Dive Bomber" from 1941. Still mint, never used and complete with all paperwork. Fresh from climate-controlled storage.

Microscale 48-9 A-6 Intruders Hi Vis US Navy/Marines / 72-63 P-40 Aces / Sprue Bros 2006 IMPS Nats Decals A-10 and Stealth Bomber

Other Materials,   Box Condition: Sealed VG+

$9   

Includes all three never used decal sets fresh from climate-controlled storage. I believe the Sprue Brothers sheet is 1/72, although it does not say. The P-40s are 1/72 and the A-6 sheet is 1/48. All three have paint and markings guides.

Revell HMS Hood Battlecruiser - For R/C Motorized, 1/388, 5032

Plastic Model Kit,   Box Condition: Good

$69   

Rare model dated 1964. This is a bigger scale, full hull kit that Revell says "is suitable for radio control operation, see special notes." Features movable rudder, one bigger drive prop and four dummy scale props, gearbox drive and turrets that rotate left and right as it sails. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. The kit is from the original Lindberg molds; it would be interesting to know how Revell of Germany ended up with that tooling. While Revell notes that the plastic parts are present for motorizing, they also state that "metal and rubber parts, motor and cables are not included in the kit."

Cleveland Boeing P-26A Peashooter Flying Aircraft With Detailing Parts, 1/16, M-60

Wood Model Kit,   Box Condition: Good-

$85   

Includes factory sealed William's Brothers #139 1.5" correct main wheels and tires and #136 correct size tail wheel as well as a very old and delicate two-piece light plastic or celluloid engine crankcase that also fits this kit. The actual model is identical to the Cleveland 'SF' or 'Scale Flying' model in museum scale of 1/16. It is simply a later part number. All Cleveland kits were exceptionally complete and this one is no exception. Features very high quality balsa printwood and strip wood, covering material, highest quality plans, all parts required for assembly and insignia. The model has not been started. Inventoried 100% complete with all parts and instructions. Although the box has wear, the kit inside is just like new. The Cleveland Model and Supply Company played a pivotal role in the development of true scale models. In 1909 Bleriot's English Channel flight caused a surge in aviation and model aircraft around the globe. Several companies were ideally positioned to take advantage of the aviation craze. In the USA, Wading River Manufacturing Co. (1909), White Aeroplane (1911), Ideal Model Aeroplane (1911), Broadfield Model Aeroplanes (1919) were among these pioneers, offering everything from plans and parts to complete kits and ARF models. Lindbergh's 1927 crossing of the Atlantic Ocean caused an even bigger world-wide phenomenon called 'The Aviation Craze' that extended up to the start of World War II. Many companies such as Megow, Guillow's and others started right around the time of Lindbergh's flight. Some of these models flew and flew well, but they all had one thing in common - were generally not accurate scale representations. In 1929, a youngster named Ed Packard had a very advanced dream to produce incredibly accurate, true scale models that flew perfectly. This radical idea established the world's longest operating single-owner model airplane supply business, called Cleveland Model and Supply Company. To this day, Cleveland models are treasured as the most accurate flying scale models produced. The fact that Mr. Packard started and successfully grew this business during The Great Depression is a testament to his ideals and business skill. I highly suggest the excellent book called 'Aviations great Recruiter, Cleveland's Ed Packard' by H.L. (Herm) Schreiner. It is an excellent history of the man, his company and the times of the Golden Age of Model Aviation.

Matchbox DH-82 A/C Tiger Moth - RAF Sywell No.6 Elementary Flying Training Shcool 1940 / RCAF Canada No. 19 E.F.T.S. Vinden Manitoba 1943 / Tiger Club Seaplane 1978 - With Wheels / Skis / Floats, 1/32, 40505

Plastic Model Kit,   Box Condition: Sealed Good

$58   

Still factory 'round tape' sealed. Very large (1/32 scale) and nicely detailed but older kit. Can be built as the RAF land-based primary trainer, the float version or the one with skis. Features highly detailed engine with removable cowling and full cockpit detail. Also has markings for all three aircraft.

Jo-Han 1970 Oldsmobile Cutlass 442 Stock or Custom, 1/25, C5070

Plastic Model Kit,   Box Condition: VG

$65   

Nice kit of this classic Oldsmobile body style. The smooth lines of a '70 Cutlass or 442 looked good from any angle. Features custom and stock parts, detailed engine and engine compartment, opening hood and full interior. Molded in white, chrome plate, clear, red-tinted clear and with rubber whitewall tires. The kit has never been started. It has been inventoried complete with all parts and includes instructions.

Jo-Han Plymouth Superbird - Stock or Racing Versions, 1/25, GC-1470

Plastic Model Kit,   Box Condition: Good+

$64   

Can be built one of two ways - Stock or Race. Features race engine with single 4bbl carb, stock engine with dual quads, stock interior or race interior with roll cage, rear axle blower, shoulder harness and seatbelt, fire extinguisher and more, detailed engine compartment, opening hood, molded underside chassis detail, optional tall rear spoiler and full decals for #43 Richard Petty. Molded in white, clear, red-tint clear, chrome plate and with rubber tires. The kit has never been started. Inventoried 100% complete including decals and instructions.

Jo-Han 1970 Oldsmobile Toronado Hardtop - Stock or Custom, 1/25, C-4970

Plastic Model Kit,   Box Condition: Good+

$55   

Early issue that is well detailed for that time. Features detailed engine and compartment, opening hood, very good front suspension detail, full interior, parts for stock and custom version and more. Molded in light blue, clear, red-tinted clear, chrome plate and rubber tires. The kit has never been started. It has been inventoried complete with all parts and includes instructions. Please NOTE that the battery is white plastic - it is from a different color issue of the same kit.

Jo-Han 1969 Plymouth Road Runner - Stock / Oval Track / Custom, 1/25, GC-2200

Plastic Model Kit,   Box Condition: Good+

$95   

Rare in this condition. Nice kit that can be build one three ways. Features detailed engine and compartment, opening hood, stock 2x4 or 1x4 carb arrangement, complete interior, a large number of custom options such as Air Grabber Duct, rear spoiler, custom lights and more. Racing parts include single 4 bbl carb , headers, Hurst shifter, full roll cage, fire extinguisher, rear axle blower/cooler, racing seat pad, belt and shoulder harnesses, safety straps, gas tank vent, spoiler, racing air cleaner and more. Molded in white, clear, red-tinted clear, chrome plate and with rubber tires. Chrome and clear are in 'near mint' condition. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. Decals are in 'excellent++' condition.

MPC Ford Mustang Super Stocker Short Oval Track Racer, 1/25, 1-2753

Plastic Model Kit,   Box Condition: Good

$145   

Very rare. One-and-only issue from the late 1970s or early 1980s. This is a very well detailed kit for that time. Features detailed engine, very complete suspension, full race chassis and cage built up, opening hood and removable body. Molded in white, black, chrome plate, clear and with rubber tires. The kit has never been started. NOTE: missing one small part, suspension link #4L. 4R is present and can be used as a pattern as this part can be made. Otherwise inventoried with all other parts, decals and instructions present. NOTE: there is a tire burn mark on the windshield.

Monogram Vandal Wild Custom Street Van With Mini-Bike, 1/24, 6675

Plastic Model Kit,   Box Condition: VG+

$29   

Dated 1973. Very nicely molded and featuring an exposed engine dug-out with a blown V-8, driver's compartment clear bubble, opening side door and tail gate, full 'living room' interior with mod posters, swag lamp and simulated carpeting, good suspension and 'cockpit' detail, full decals and an excellent mini-bike that rides on the back bumper. Molded in gloss black, chrome plate, clear and with rubber tires. There has been no assembly but NOTE that one inner panel has one light brush stroke of paint. There is no other painting. Missing one tail light. Otherwise inventoried with all other parts, decals and instructions present.

Monogram Heavy Chevy Chevelle 1970 Chevrolet Chevelle - 3 in 1, 2715

Plastic Model Kit,   Box Condition: Good+

$24   

1991 issue from 1985 molds. Nicely detailed with a wide option of parts for dragster, custom or stock version, full engine detail, engine compartment, opening/removable hood, complete interior, underside detail and more. Molded in blue, chrome plate, clear and with rubber tires. The kit has never been started. The blue parts are still in the sealed bags. The parts that were not factory sealed (chrome and clear) have been inventoried complete including decals and instructions.

Monogram 1956 Ford Thunderbird with Metal Body - (T-Bird), 1/24, 6101

Plastic Model Kit,   Box Condition: Good

$59   

1977 issue. Includes die cast metal body and body parts with plastic details and chassis. Molded in color, clear, chrome and with rubber tires. Features full engine, full interior and underside details, opening hood, removable hardtop and more. The kit has never been started. It has been inventoried complete with all parts and includes instructions. Please NOTE that the steering wheel is intact in one piece but has closed cracks.

Tamiya Pibber PBR 31Mk.II Patrol River Boat, 1/35, MM150

Plastic Model Kit,   Box Condition: Good+

$42   

Very well detailed large scale kit with four figures and numerous accessories such as 55 gallon drums, jerry can, hot/cold food container, binoculars, helmet, ammo box and radio/cassette player. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

DML Ho-229A-1 Flying Wing - (Ho-229 A-1), 1/48, 5505

Plastic Model Kit,   Box Condition: Sealed NM

$75   

Still factory sealed. From 1992. Very highly detailed and also includes photoetched details.

MPC Cygnus Space Ship - From The Walt Disney Movie The Black Hole, 1-1983

Plastic Model Kit,   Box Condition: Good-

$225   

Rare kit from 1979. This is the one and only issue of this 2 foot long model. Features detachable Palomino and Probe Ship and display stand. Molded in gray, clear and red-tinted clear. The kit has never been started. The 'Cygnus' spaceship is inventoried complete but NOTE- the display stand is missing (1) straight brace. One part with four narrow legs has two legs broken, but all parts are present and repairable. The box has one split corner, one closed tear on a long side, three small pieces of masking tape on two long and one short side, clear tape at the same locations and on the split corner, a 'crush' at the upper right and general wear as shown. The box is not in 'collectible' condition; would make an excellent builder kit.

SMER Viking Ship, 1/80, 502

Plastic Model Kit,   Box Condition: Sealed Exc

$55   

Still factory sealed. Great builder if you are a fan of the Aurora kit. This model is a copy of the Aurora Viking ship in the same scale. Merit originally pirated the Aurora molds; then Artiplast acquired Merit. Ultimately SMER ended up with most the Artiplast molds, including this one.