Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale.

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Airfix Focke-Wulf FW-190D White-Side Issue Craftmaster, 1/72, 1223-50

Plastic Model Kit,   Box Condition: Sealed Mint

$22   

Still factory sealed and in investment-grade condition. This is the white-sided box variant. A well-holed and damaged FW makes a hasty power-off landing in this great box art. The emergency vehicles race down the runway ready to douse the flaming engine. The pilot has the canopy open to clear the smoke or to make a hasty exitor both. This is the larger format box version of this kit and has black sides. The smaller box is kit #6-39. There are at least three known Craftmaster box variants with this box art - the small box one 6-89 and two kits sharing #1223-50; one has black side panels and one has white.

Comet Miniatures Flying Sub From Voyage To The Bottom Of The Sea, MM03

Metal Model Kit,   Box Condition: Sealed

$24   

Rare and still factory sealed. No scale is given, but the cast metal sub is about 1.5 inches wide. Includes painting guide on the back.

AMT-Frog Martin Marauder II (B-26C) - USAF / France / South Africa, 1/72, A646-130

Plastic Model Kit,   Box Condition: Good

$18   

Limited issue from the 1970s when AMT bought Frog kits from Britain, reboxed them and marketed them in North America. Has decals for all three Air Forces. High quality Frog kit - no rivets, just fine panel lines for a realistic model. Features separately molded rudder, elevator and ailerons, pilot and gunner figure and detailed engines with rotating propellers. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Hasegawa Messerschmitt Me-163B Komet With Eduard Mask and Two PE Sets - (2) JG400 / (1) Training and Prototype, 1/32, JS087

Plastic Model Kit,   Box Condition: Good+

$54   

Includes Eduard #32058 PE Detail Set for this model (factory sealed), #33-014 Zoom PE Interior Detail Set (factory sealed) and #JX-017 Mask Set, also factory sealed. The actual kit is likely from the early 1980s and a well detailed model for that time. Features full cockpit detail, landing skid or wheels, optional position tail wheel/strut and detailed Walter 509A Rocket Motor. Has markings for four aircraft - Me-163 B-1 2nd Staffel of JG400 Brandis, 1944, B-1a Training Staffel, B-1a 1st Staffel JG400 and the Prototype Me-163B-0 V41, the world's first operational rocket fighter 1944. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Arii Alfa Class Submarine Red Star - Two Kits With Stand and Water Base, 1/700, 3

Plastic Model Kit,   Box Condition: Exc++

$16   

Kit features two sub kits; one is waterline, and one is full hull. Both have recessed panel lines. There are two display options - there is a very nice clear vacuform 'water' display base with two indentations - one for the waterline model and one for the full hull model. You can paint the 'water' blue for a realistic appearance. There is also a display stand for the full hull model. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Arii Turbulent Trafalgar Class Submarines - Two Kits With Stand and Water Base, 1/700, 6

Plastic Model Kit,   Box Condition: Exc+

$16   

Kit features two sub kits; one is waterline, and one is full hull. Both have recessed panel lines. There are two display options - there is a very nice clear vacuform 'water' display base with two indentations - one for the waterline model and one for the full hull model. You can paint the 'water' blue for a realistic appearance. There is also a display stand for the full hull model. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Arii Boston Los Angeles Submarines - Two Kits With Stand and Water Base, 1/700, 5

Plastic Model Kit,   Box Condition: VG++

$16   

Kit features two sub kits; one is waterline, and one is full hull. Both have recessed panel lines. There are two display options - there is a very nice clear vacuform 'water' display base with two indentations - one for the waterline model and one for the full hull model. You can paint the 'water' blue for a realistic appearance. There is also a display stand for the full hull model. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Arii Alfa Class Submarine Stalin - Two Kits With Stand and Water Base, 1/700, 7

Plastic Model Kit,   Box Condition: Exc++

$16   

Kit features two sub kits; one is waterline, and one is full hull. Both have recessed panel lines. There are two display options - there is a very nice clear vacuform 'water' display base with two indentations - one for the waterline model and one for the full hull model. You can paint the 'water' blue for a realistic appearance. There is also a display stand for the full hull model. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Arii JSDF Sachisio / Yushio Class Submarine - Two Kits With Stand and Water Base, 1/700, 8

Plastic Model Kit,   Box Condition: Exc+

$16   

Kit features two sub kits; one is waterline, and one is full hull. Both have recessed panel lines. There are two display options - there is a very nice clear vacuform 'water' display base with two indentations - one for the waterline model and one for the full hull model. You can paint the 'water' blue for a realistic appearance. There is also a display stand for the full hull model. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Arii JSDF Yushio Class Submarines - Two Kits With Stand and Water Base, 1/700, 4

Plastic Model Kit,   Box Condition: VG

$16   

Kit features two sub kits; one is waterline, and one is full hull. Both have recessed panel lines. There are two display options - there is a very nice clear vacuform 'water' display base with two indentations - one for the waterline model and one for the full hull model. You can paint the 'water' blue for a realistic appearance. There is also a display stand for the full hull model. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Gulfstream German Type IXC U-Boat, 9302

Resin Model Kit,   Box Condition: VG

$22   

Features TWO excellent quality resin one-piece hull and sail with very fine drain holes and decking and a large number of PE details, but only has PE for one sub. Complete and never started and includes instructions.

Verlinden British X-Craft Mini-Sub - (Mini Submarine), 1/35, 247

Resin Model Kit,   Box Condition: Good

$39   

This is a very large scale diorama measuring 17" by 8" when built. The X-Craft is one part with the water base. Very well molded and detailed. Includes one piece base and X-Craft, several parts and sailor as shown on the box top illustration. Never stared and complete. This is a very simple kit, it did not come with instructions.

Lindberg Motorized F6F Hellcat, 1/48, 3106M-200

Plastic Model Kit,   Box Condition: Sealed VG++

$45   

Still factory sealed but the seal has split and drawn the box top concave. Dated 1969. This is a reissue of the classic motorized 1950s release and a perfect builder.

Lindberg Heinkel He-111, 1/64, 580-200

Plastic Model Kit,   Box Condition: VG+

$38   

Large hard box from 1967. Has movable control surfaces, working landing gear and scale engines with removable cowling. Also includes an engine ground display stand, crew and mechanic figures. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. NOTE: the very tips of two small gear braces are broken off but present.

UPC Grumman F4F Wildcat (ex-Aoshima), 1/91, 8004-50

Plastic Model Kit,   Box Condition: NM

$20   

Nicely molded but older model with fantastic 'near mint' condition box. Features folding wings, working ailerons, opening canopy, rotating propeller, drop tank and pilot figure. Molded in blue and clear. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions. UPC stood for Universal Powermaster Corporation which was based out of New York City, NY. UPC did not cut their own molds, but bought kits already molded from other manufacturers and re-boxed the kits in the USA. Scott Eidson, the famous artist best known for his artwork with Revell, also did UPC box art in the 1960s. All UPC production ended in the 1970s.

Fujimi Bell AH-1G Huey Cobra - US Army, 1/50, FH-2-129

Plastic Model Kit,   Box Condition: Sealed Exc+

$32   

Still factory sealed. Large scale Cobra kit from high quality Fujimi-Mokei molds. Feature very fine raised panel detail, complete cockpit, pilots, working front and aft rotors and missile load. Never started. Factory sealed bags with decals and instructions.

MPC Mitsubishi Zero, 1/72, 7006-70

Plastic Model Kit,   Box Condition: Good-

$16   

This kit is from Airfix molds and is one of the MPC '3 Big Bonus' features series. Dates from the late 1960s/early 1970s. The model features customizing parts (such as chrome plated bombs, missiles, prop, exhaust, air scoops, antenna and guns) and the clear modular display stand. Note that this issue still has 'Craft Master' under the MPC logo. Before this, MPC was marketing Airfix kits under the Craftmaster name in the USA. This continued for several issues and was finally discontinued although MPC continued to distribute Airfix and their own models The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

MPC Stuka Ju-87, 1/72, 7004-70

Plastic Model Kit,   Box Condition: Sealed VG++

$24   

Still factory sealed. This kit is from Airfix molds and is one of the MPC '3 Big Bonus' features series. Dates from the late 1960s/early 1970s. The model features customizing parts (such as chrome plated bombs, missiles, prop, exhaust, air scoops, antenna and guns), stock and customizing decals and the clear modular display stand. Note that this issue still have 'Craft Master' under the MPC logo. Before this, MPC was marketing Airfix kits under the Craftmaster name in the USA. This continued for several issues and was finally discontinued although MPC continued to distribute Airfix and their own models.

MPC Heinkel He-111H Profile Series - 6/KG 55 France 1940 / Benina Cyrenaica 1942 / 11/KG 53 Winter Northern Europe 1943/44 - (He111H), 1/72, 2-1511-150

Plastic Model Kit,   Box Condition: Sealed Mint

$30   

Still factory sealed. In the 1970s, MPC released the very popular Profile Series. Inside each box was a quality Airfix kit but with MPC decals to build any of the three aircraft shown on the box top. Well detailed kit for that time featuring elevating and rotating gun and turret, full crew, movable ailerons, elevators and rudder, optional position landing gear and external bomb load.

MPC Vought F4U-1 Corsair Profile Series - US Marine Reserve / USS Bunker Hill 1944 / Royal New Zealand Air Force 14th Sq Guadalcanal 1945 - (F4U1), 1/72, 2-1108-100

Plastic Model Kit,   Box Condition: Sealed NM

$24   

Still factory sealed. In the 1970s, MPC released the very popular Profile Series. Inside each box was a quality Airfix kit but with MPC decals to build any of the three aircraft shown on the box top.