Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Planet Models Horten VII V-1 German Flying Wing, 1/72, 128

Resin Model Kit,   Box Condition: VG+

Sold   

Rare limited edition kit that is beautifully cast in high definition resin. Features a full cockpit and fine recessed panel lines. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions. The H.VII was originally allocated the Reichsluftfahrtministerium (RLM) designation 8-226, but was later given the new RLM designation 8-254, so it was known by inference as Horten Ho 226 or Horten Ho 254, though these designations were little used in practice. In 1942 the H.VII design began as a test-bed for the Schmitt-Argus pulse-jet engine but this project was canceled in 1943 and the aircraft's role became that of a trainer. It was based on the Horten H.V but with more powerful Argus As 10C engines. Walter Horten piloted its first flight in May 1944 and took part in many hours of a series of test flights, partly intended to quell concerns about the tailless aircraft's controllability in the case of an asymmetric power loss. Two prototypes were built and the H.VII V-3, nearing completion by the time that the allied advance reached the Peschke factory in Minden, would have been the first of twenty production aircraft. Two H.VIIs were destroyed in the advance and one taken to the USSR

Fine Molds TWO Curtiss R3C-0 - Seaplane Racer - (R3C0), 1/72, FJ-2

Plastic Model Kit,   Box Condition: Exc++

Sold   

SALE!! Includes two kits in the one box shown. Kit #1 is never started and still in the factory sealed bag. Includes decals and instructions. Kit #2 has not been started. Inventoried 100% complete with all parts, decals and instructions present. This is an excellent model that includes Donald Curtiss figure, transport dolly and display stand.

AV Models Rocket EMW A-10 - German Manned Ballistic Missile Concept V.1 (1945), 1/72

Resin Model Kit,   Box Condition: Good+

Sold   

Rare, very large 1/72 scale model of this manned ballistic missile design. Features finely cast resin parts with recessed surface detail, cast metal details, photoetched parts. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions. Designed to strike the American East Coast, the EMW A-10 was a two-stage ballistic missile based on the venerable A-4, better known as the V-2. In this first version, plans called for the first stage to carry six EMW engines that fed into a common nozzle. The upper stage (the A-9) would carry a pilot as well as the missile's warhead (perhaps a nuclear weapon). An interesting feature of this arrangement was that the upper stage was to be embedded within the first instead of being stacked as is common with all modern multi-stage rockets. According to the proposed scenario, the pilot would be guided across the Atlantic to his target by a series of strategically placed U-boats and then bail out just as the rocket went into its final dive.

Tamiya 7.5cm Anti-Tank Gun Pak 40/L46 And 20mm Flak38 MIT Sd.Ah.51 And Germany Army Infantry, 1/35, MM147

Plastic Model Kit,   Box Condition: VG

Sold   

SALE!! Includes all three 1/35 scale kits. All three are never started and inventoried complete with all parts and includes instructions.

Eduard Roland C-II Profipack, 1/48, 8041

Multimedia Model Kit,   Box Condition: Sealed Exc

Sold   

Still factory sealed. Highly detailed model kit with main injection molded parts, numerous photoetched details, film instruments, mask set and painting guide and decals for multiple aircraft.

Comet Taylorcraft Jr Struct-O-Speed Flying Model And D3 Flash-Bilt Spitfire Glider, C2

Wood Model Kit,   Box Condition: Good-

Sold   

SALE!! Includes both models in the original boxes. From the early 1950s. The Flash-Bilt Spitfire has a 7.75 inch winggspan, all die-cut factory decorated parts, a launcher and building plans/instructions that include a how to fly section. Never started and complete. The Taylorcraft has a 9.5 inch wingspan, all die-cut parts and illustrated full instructions with all patterns required and cut-out insignia. This is not a stick and tissue model but a full 3D model made from all balsa wood. Never started. Inventoried and NOTE: missing 2 square inner fuselage bulkheads (easily made). Otherwise complete with all other parts and paperwork.

AV USK Rogozarski Ik-3 - Yugoslavian WWII Fighter, 1/72, AV1009

Plastic Model Kit,   Box Condition: Exc

Sold   

Limited edition injection molded kit that is well detailed. Features fine recessed panel lines, photoetched brass fret of parts, film instruments, good cockpit and more. Includes painting guide and decals. Never started and inventoried complete with all parts and includes decals and instructions.

Tamiya USS Yorktown CV5 Aircraft Carrier Plus FStar Flight Deck Set / Toms PE Set / Blue Ridge 5, 1/700, 31712-2400

Plastic Model Kit,   Box Condition: VG

Sold   

Build the ultimate 1/700 USS Yorktown CV-5! Includes the following complete and never started aftermarket accessories: FStar #FS700045 USS Yorktown Flight Deck Set, Tom's Modelworks #776 Brass PE Detail set (three frets), 3D Model Parts #U701 (32) 20mm Oerlikon Cannon Single Mounts, Blue Ridge #BRM-10014 5"/38 (12) Calibre Gun Single, Blue Ridge BRM-10008 (24) M2 Browning .50 Navy Mounted Machine Guns and Starfighter Decals #700-102 USN Yorktown Class CV markings with extensive decals for Yorktown and Enterprise, including airwing markings also. The actual model is a 1/700 scale waterline kit. Very highly detailed and finely molded. The model as never been started. The parts are still in the factory sealed bag with decals and instructions.

Dodgson Designs Pivot R/C Glider - 60 Inch Wingspan

Wood and Plastic Model Kit,   Box Condition: Good-

Sold   

Sold new in August of 1989. This design features fibreglass fulelage, die-cut balsa and plywood parts, many factory-cut balsa parts, foam core wings, extensive hardware, wood stock as required and full size plans. Inside, the kit is exactly as it left the factory. It is never started and the parts that were factory sealed are still in the clear sealed bags. The larger parts were never sealed and are inventoried complete. Includes all paperwork. NOTE: unless you specify otherwise, this kit will be wrapped in brown paper and shipped without an outer box. If you choose to have it boxed, please note that in the comments during checkout. The shipping will be more than what the website calculates and we will send you an invoice for the difference.

Future Flight Fling Thing Glider - 56.5 Inch Wingspan R/C Flying Model, FFT-FTH07

Wood Model Kit,   Box Condition: Exc

Sold   

This glider features low wing loading, 14 oz minimum weight, smooth handling, power conversions, superior speed range, diecut balsa parts, other factory cut parts of balsa and lite plywood as required, full hardware, excellent full size plans and detailed text instructions. Inside, the kit is exactly as it left the factory. It is never started and the parts that were factory sealed are still in the clear sealed bags. The larger parts were never sealed and are inventoried complete. Includes all paperwork. NOTE: unless you specify otherwise, this kit will be wrapped in brown paper and shipped without an outer box. If you choose to have it boxed, please note that in the comments during checkout. The shipping will be more than what the website calculates and we will send you an invoice for the difference.

SIG Samurai The Slope Warrior Sailplane - 67 Inch Wingspan Glider, RC-64

Wood Model Kit,   Box Condition: Exc

Sold   

This large r/c glider features a beautiful factory-built fiberglass fuselage and canopy, precision cut gray foam wing cores, top quality Sig balsa and plywood, pre-cut balsa tail surfaces, heavy duty 5/16" music wire wing rods, injection molded wing actuators made from nylon, ball links and push rods, 20 page photo-illustrated instruction book and complete hardware package. Inside, the kit is exactly as it left the factory. It is never started and the parts that were factory sealed are still in the clear sealed bags. The larger parts were never sealed and are inventoried complete. Includes all paperwork. NOTE: unless you specify otherwise, this kit will be wrapped in brown paper and shipped without an outer box. If you choose to have it boxed, please note that in the comments during checkout. The shipping will be more than what the website calculates and we will send you an invoice for the difference.

Tasman TWO De Havilland DH-89A Dragon Rapide Upgrade - With Vac Canopy / white metal / rigging wire / 5 decals - USAAF 'Wee Wullie' and X7523 - RAF 'Women of the Empire' - RNZAF or RAAF A33-1, 1/72, UG2001

Plastic Model Kit,   Box Condition: Exc++

Sold   

SALE!! Includes two kits in the one box shown. Kit #1 is never started and all parts are still sealed in the factory clear bags. Includes decals and instructions. Kit #2 has never been started and is inventoried but NOTE: includes clear Falcon windshield but missing the Heller clear parts. Otherwise complete with all other parts, decals and instructions. These are Tasman's very nice 'Upgrade' kit which includes the base Heller kit molded in white with a clear windshield, Falcon vac windshield, decals for the five aircraft listed, excellent metal instrument panel (taped to the clear Falcon windshield, green windshield tinting material, rigging wire, a very large double-sided fold out with detail pictures of the real aircraft, full instructions including paint guide for all aircraft, rigging, important notes about each of the 5 airplanes that decals are supplied for and extensive detailing instructions to improve the base Heller kit further.

Valom B-26 Marauder - USAAF 22nd Bomb Group Langley Virginia USA 1941 / USAAF 22nd BG Australia February 1942, 1/72, 72043

Plastic Model Kit,   Box Condition: Exc

Sold   

This model from all new molds and represents a very early 1941 B-26. Features all fine recessed surface detail, excellent cockpit detail, many brass PE parts, film instruments, resin detail including twin-row engines, detailed gear wells and more. Includes a full color paint guide and decals for both aircraft listed. Never started and inventoried complete with all parts and includes decals and instructions.

Squadron (2) P-38J Lightning Replacement Canopies, 1/72, 9113

Vacuform Model Kit,   Box Condition: Sealed

Sold   

Very well molded, crystal clear two canopy set in 1/72 scale. Never used and still sealed in the original Squadron ziplock bag. These clear and thin canopies are a superior upgrade to the thick canopies supplied with most kits.

Special Hobby IAM (Romeo) Ro-57 Italian Fighter, 1/72, SH72082

Plastic Model Kit,   Box Condition: VG

Sold   

Very nicely molded with fine recessed panel lines. Includes many cast high-definition resin parts including two engine kits. Never started. Factory sealed bag or inventoried 100% complete with all parts, decals and instructions.

Koster 7 Way Conversion P-38F / P-38M / P-38J / P-38L / F-5A (2 different ones) / F-5E, 1/48, 6

Vacuform Model Kit,   Box Condition: VG+

Sold   

Includes 33 high-quality vacuform parts, 9 clear parts and decals for 7 different aircraft. Details include early cockpits, different nose sections, main wheel wells, hump cockpit and nose radar, Droop Snoot Nose and more. Six are US Air Force and one is French Air Force (F-5A). One of the interesting conversions is the P-38L BTO (Bombing Through Overcast) Pathfinder from 67th TRG / 107th TRS / 9th Air Force. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Tamiya Dornier Do-335 B-2 Pfeil Arrow Heavily Armed Version - (Do335B2), 1/48, 61088

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Still factory sealed. Rare, limited issue with special wing-mounted cannon dated 2003.

Eduard Avia B-534 - In Slovak WWII Service - With Decals For 5 Different WWII Aircraft - Limited Edition With Lapel Pin, 1/48, 1146

Plastic Model Kit,   Box Condition: Sealed Exc

Sold   

Still factory sealed. Hard-to-find limited edition and an excellent model featuring colored photoetched details, comprehensive masking set, all fine recessed panel lines, detailed cockpit, optional parts, full color painting guide, decals for five aircraft and more.

IHP HMS Invincible British Battlecruiser Design G3 1922 - Hull Plus Large And Unique Parts Only - Imperial Hobby Productions, 1/700, SLP-3

Plastic Model Kit,   Box Condition: NM

Sold   

This kit consist of a beautiful high-definition resin cast waterline hull and the ship's large & unique parts. These parts include 3x main turrets, fore and aft funnels, secondary turrets, several superstructure parts for fore & aft and four gun directors. The instructions say that it is 'about 70% complete" so like all IHP 'hull + unique/large parts' models, you will need another kit to completely detail it; in this case, IHP recommends the 1/700 Tamiya Rodney or Nelson kits to detail the model to the 1922 configuration. In some cases the Pit Road/Skywave sets of "Equipment For Navy Ships" works well for even finer details. Never started. The hull is in mint condition. The small parts are still factory sealed. Includes instructions with excellent drawings and references. The Invincible class was parts of Britain's attempt to maintain naval parity with Japan and the United States in the year immediately following WWI. The Japanese 8-8 Plan and the American Military Laws passed in 1916 provided for very large battleship and battlecruisers, all of which would have outclassed even the Royal Navy Hood, which was under constructions. In response the RN drew up plans and requirement for capital ship to carry no less than 16 inch guns. These battlecruisers were laid down in 1921 and were known as the Invincible class. They were worthy of the name; indeed, they would have been the most powerful capital ships ever built for the Royal Navy. The Invincible design has the main armament concentrated forward to shorten the armored citadel and allow for high-powered propulsion machinery to be install aft. This results in a very forward-looking vessel and the firing arcs of some main guns were limited. The British simply justified this by stating that British ship do not run away, and therefore no heavy aft weapons were needed. For the first time in British capital ship construction a transom stern was fitted. The G3 battlecruisers were significantly larger than their predecessors of the Admiral class. They had an overall length of 856 feet (260.9 m), a beam of 106 feet (32.3 m), and a draught of 36 feet (11.0 m) at deep load. They would have displaced 48,400 long tons (49,200 t) normally and 53,909 long tons (54,774 t) at deep load, over 8,000 long tons (8,100 t) more than the older ships. They had a metacentric height of 7.786 feet (2.4 m) at deep load as well as a complete double bottom. Four ships were planned: Invincible, Inflexible, Indomitable and Indefatigable. These impressive ships were more like fast battleships than battlecruisers so it seems redundant that a slow battleship companion was also planned (with 18 inch guns). The Washington Treaty brought an end to the construction in 1922. However, this design was modified to fit the new treaty limits and the result was the Nelson class battle ships (called design O3) of 1927.