Vac Wings Yakovlev Yak-36 Forger - Bagged, 1/48, VW4811
Vacuform Model Kit
$18
Large 1/48 scale Forger. Very nicely molded vac kit with fine, recessed panel lines, numerous metal parts including landing gear, weapons pylons, missiles machine guns and more, clear canopy and full decals. The kit has never been started. Internal factory sealed bag or inventoried 100% complete including decals and instructions.
Aurora Convair VR XFY-1 Pogo, 1/48, 60
Plastic Model Kit, Box Condition: VG++
$155
1955 hardbox design. Please note the early Aurora rectangular logo, which was used from about 1953 to 1955. However, the factory has blacked out all the price extensions, so this one may be from around 1957/58. Rare, large scale model features working counter-rotating props and is molded in gloss silver and clear. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.
Airmodel Focke-Wulf FW-56 Stosser Falcon - Luftwaffe or Austrian Air Force - Bagged, 1/72
Plastic Model Kit, Box Condition: VG++
$10
Completely injection molded kit, not vacuform. Nicely molded. The kit has never been started. Inventoried with all parts and instructions present. This is the first Focke-Wulf design that Kurt Tank was responsible for. Later he designed the famous and effective 190 series.
Revell Whip-Fly F-89D Scorpion, 1/80, H153-98
Plastic Model Kit, Box Condition: Exc
$110
1960 issue of the rare "Whip Fly" series. The box is in rare 'excellent' collector condition. Hardbox artwork for this series was the 'action' photos by Tom Kelly. The kit has never been started. Inventoried complete with all aircraft parts, decals, instructions, metal ring, plastic handle, square of clay, 12' of line and plastic streamers. Like many other ideas, the Whip-Fly series seemed like a good idea...at first. The shortcomings were quickly revealed as energetic youngsters began spinning heavily weighted, pointed nose plastic aircraft inside and outside at speeds up to 45 mph. The series was quickly discontinued.
Hawk Vickers Viscount Jet-Prop Capital Airlines With Capital Viscount Flyer - Picture Gallery Issue, 1/96, 503
Plastic Model Kit, Box Condition: Exc++
$85
Rare model of the first commercial turboprop airliner, and it includes the rare Capital Airlines one page "The Jet Prop Viscount' advertising sheet. The box displays beautifully and is in 'Excellent' condition with as new color and gloss, four solid corners, no tape and no price tags, no fading and no litho tears. Light general wear and a very light stain on the lower part of one long side are the only flaws. Includes passenger boarding ramp and Capital airlines decals in 'excellent+' condition with light age yellowing as the only flaw. Never started. It has been inventoried complete with all parts and includes decals and instructions. The box top would grade even higher than 'excellent++' but is graded as such because there is a very light stain on the top long side.
Muir Models Inc 2 Rayonier Bunk Cars HOn3 - HO Scale Craftsman Model, 1/87, 042
Wood and Plastic Model Kit, Box Condition: VG
$42
Highly detailed featuring pre-cut and scored hardwood, scale metal corrugated siding and plastic details such as window frames. The kit has never been started. The parts that were factory sealed are still in the sealed bags. The few parts that were not factory sealed have been inventoried complete including instructions.
Airfix Folland Gnat T.1 CFS - RAF Aerobatic Team 'Red Arrows' Little Rissington 1972 - Blister Pack, 1/72, 01036-2
Plastic Model Kit, Box Condition: Sealed VG++
$18
Still factory sealed. 1973 issue molded in red and clear. Had decals and paint guide for Red Arrow aircraft.
KP Sukhoi Su-25K Frogfoot, 1/72, KP030
Plastic Model Kit, Box Condition: Good
$16
Nicely molded kit. Includes full underwing stores and decals for Czech and Soviet (USSR) Air Forces as well as a variety of aircraft numbers to code your model any way that you wish. Never started. It has been inventoried complete with all parts and includes decals and instructions.
CA Atkins Austrian Aviatik (Berg) D-I, 1/72
Metal Model Kit, Box Condition: VG
$36
Rare, limited issue, very high quality cast metal kit. Includes full instructions. Never started. The parts are still in the factory sealed bag.
CA Atkins Phonix D-I / D-II, 1/72
Metal Model Kit, Box Condition: VG
$34
Rare, limited issue, very high quality cast metal kit. Has parts for either D-I or D-II variants. Includes full instructions. Never started. The parts are still in the factory sealed bag.
Airmodel Yak-15 Conversion (from Yak-9), 1/72, 195
Vacuform Model Kit, Box Condition: VG
$6
Very finely molded conversion with recessed panel lines; better mold quality than many injection molded kits. In white and clear plastic with instructions/plans. Never started. Complete with all parts and instructions. Conversion kits require a base injection molded kit (not included; Airfix Yak-9 is recommended) to complete. Vac kits are only recommended for experienced modelers and some scratchbuilding may be required.
MPC Dodge D-50 Pickup Truck, 1/25, Q1-10753
Plastic Model Kit, Box Condition: Sealed Exc
$54
Still factory sealed. Dated 1980. Can be built stock or custom with many optional parts such as roll bar, sun roof, rear bucket seats, custom wheels, etc. Includes opening hood, detailed engine with optional turbocharger, and more. Molded in color, clear, chrome and rubber.
Hobby-Time McDonnell F3H-1 Demon Shipboard Interceptor - (F3H1), 1/45, 2003
Vacuform Model Kit, Box Condition: VG
$65
Rare large scale Demon. Very close to 1/48; measures 15.5 inches long when assembled. Can be built as a flying model with retracted landing gear or a static model with extended landing gear. Features recessed panel line detail, vacuform main parts, injection molded details, clear canopy, catapult launcher and decals. The kit has never been started. Inventoried 100% complete including decals and instructions.
Sanwa B-26D Invader Bomber - (A-26 / A/B-26), 1/110, 514
Plastic Model Kit, Box Condition: Sealed Exc-
$58
Still factory sealed. Dates from the early 1960s and very hard to find. The scale is approximate. The kit is dated by the 'Tokyo Plamo' logo, which was used between 1960 and 1964. Sanwa was one of Japan's earliest post-WWII kit producers, making model kits in the 1950s; some sources say 1955. Kits were marketed under Sanwa and Tokyo Plamo, with the general consensus being the the later logo came out around 1960 or later. Production ended in 1964, making all Sanwa kits rare and collectible. The entire line was extensive. It included very small scale tanks (some that were motorized), battleships in three scales with the larger ones motorized with dual prop drive, slot cars, civil sport boats and an electric outboard, a full line of hand gun models that actually shot plastic bullets, two fighter groups and bomber groups (probably Monogram), several different lines of scale aircraft, missile kits, scale (static) car models of early Japanese automobiles, at least 7 flying model aircraft that had electric and rubber motors, a 'Super Control Stand' P-51 that moved with a joystick and had an electric propeller and sound unit, two different lighthouses and a windmill, an air cushion boat, motor cycles, a diving submarine (electric) and a working (rubber band) George Washington Class SSBN and even a garden tractor with an electric motor. There was even a cut away 727 in big 1/96 scale and an Airport Set with a Cessna 180 and Bell 47D Helicotoper. Just before going out of business, Sanwa issued some kits in conjunction with the 1964 Tokyo Olympic games - these kits even included a copy of an Olympic medal.
Faller Noratlas 2501 Motorized - Luftwaffe, 1/100, 1501
Plastic Model Kit, Box Condition: Good
$55
Rare kit from the 1960s designed for dual electric motor drive with the Faller no. 1001 Miniature Electric Motor (not furnished; Faller sold the motor separately). Nicely molded for the time featuring rotating propellers, positionable ailerons, rudders and elevator, optional position rear boarding door and forward crew boarding door, rear drive-on boarding ramp, clear side and cockpit windows and more. The kit has never been started. The small and motorizing specific parts are still in the internal factory sealed bag. The other parts were never sealed and have been inventoried complete including decals and instructions.
Aurora British Churchill Tank, 1/48, 327
Plastic Model Kit, Box Condition: Sealed NM
$95
Still factory sealed. 1972 Big A softbox issue is in investment-grade condition. Features elevating gun, rotating turret, figures, operating treads and bogies and battlefield display stand.
Faller Junkers Ju-87 Stuka Motorized - Dive Bomber or Anti-Tank, 1/100, 1087
Plastic Model Kit, Box Condition: VG
$55
Rare model kit from the early 1960s and nicely molded for that time. It is designed to be motorized with the Faller No. 1001 Miniature Electric Motor (not included, Faller sold it separately.) Features parts to built either version, cockpit with crew of two and rear machine gun, wing cannon, main centerline bomb load, small wing-mounted bombs and a large decal sheet for multiple aircraft. Molded in a stunning swirl green and butterscotch brown, gray, orange-yellow, red and with clear canopy & display stand. The kit has never been started. The small parts (with motorizing-specific parts) are still in the factory sealed bag. The parts that were never factory sealed have been inventoried complete, including decals and instructions. Even the Faller packing quality inspection slip is still present.
Dumas P-26 Peashooter - 17.5 inch Wingspan For Rubber Power or Electric And R/C Conversion, 223
Wood Model Kit, Box Condition: NM
$26
Excellent wooden kit designed for rubber power but can also be converted to electric and R/C with todays small components. Features hand-selected laser cut balsa, contest rubber and plastic prop, vacuformed details, color decals, full size plan, hardware, lightweight colored tissue and full step by step instructions. The kit has never been started. The parts that were factory sealed are still in the sealed bags. The parts that were not factory sealed have been inventoried complete including decals and instructions.
Pegasus Supermarine Spitfire F22/24 - 603 'City of Edinburgh' Sqn 1950 - Bagged, 1/72, 002
Plastic Model Kit, Box Condition: Sealed
$16
Still factory sealed. Limited edition injection kit. Features very nice moldings with fine recessed panel lines and full decals.
Constructo Clipper Great Republic - Highly Prefabricated 20 Inch Long Wooden Ship, 1/265, U601
Multimedia Model Kit, Box Condition: VG
$129
20 inches long and 11.5 inches high when assembled. Constructo kits are the finest of all the older prefabricated wooden ship kits. Features a completely shaped and sanded hardwood hull with predrilled mast, bowsprit, anchor chain and pedestal mounting holes, finished wood display stand, finished and painted stand pedestals and mounting nails, a large sheet of heavy cardboard with dozens of completely cut and finished and numbered hardwood parts held on with string, a factory sealed bag of fully finished fittings of metal, wood and plastic, numerous other hardwood parts completely cut to shape and numbered, deadeyes and blocks, paint and glue, wood stock as required and a complete set of sewn, ready-to-install cloth sails, black and white standing and running rigging thread, instructions in English and a full size plan sheet with many views, complete part identifications by number and excellent rigging diagrams. The kit has never been started. All the small parts are still in the factory sealed bags or factory-tied to the display piece. Only the hull was not factory sealed. With full size plans and instructions. Constructo kits were made in Spain and early issues in the USA were marketed by Constructo Nautical Miniatures, Inc, New York 1. There were many series of kits issues by size; some smaller and some larger than this kit.