Plastic Model Kit, Box Condition: VG
$28
Purchased new on September 28, 1965 in Cleveland, Ohio. Very colorful box art of a Beaufigher making a low attack run on shipping. Kit includes torpedo and rocket load-outs. Never started. Inventoried and 100% complete with all parts, decals and instructions. Please NOTE the box looks better than the grade, but is graded 'very good' because there is a closed tear on one side. Craftmaster kits were made in the UK by Airfix and marketed by MPC in the USA.
Plastic Model Kit, Box Condition: Exc
$2200
Very, very rare, complete and 100% correct. The Pan Am Airport Scene was commissioned by Pan Am in the late 1950s and only sold through the airline, not through Revell distributors. This has made it one of the rarest Revell kits in existence. It is widely considered an 'S' kit since it was made at that time and features that style of artwork, but the box never had the yellow 'S' anywhere on it. It contains all the parts and markings listed in the title and makes an incredible airport diorama. The box has excellent color and gloss with no tears or stains. Three corners are solid - the other has been repaired very neatly with clear tape. There is general wear as shown but no other damage. Inside, the parts are as new. All pieces are in the correct gloss silver plastic with the clear Revell 'Swivel Base Display Stand.' The airport accessories are still sealed in the original factory bag, including the metal axles. The unique decal sheet for this special issue is intact, never cut and in 'good' condition. It contains Pan Am DC-7 decals and markings for the ground equipment. The decals are flat but have some yellowing and two creases. On the back they have the correct Revell markings and part number to be original for this model. The instructions are 100% correct and original for this model. They are in 'very good+' condition with the usual yellowing, two very small thin spots and one very light stain. In all, an excellent investment piece that has never been started with the airport parts bag sealed and otherwise inventoried complete with the correct decals and instructions. Please note that Revell did NOT issue this kit with paper 'carpet' like the United Airlines Flight 707 Airport Scene. The 'carpet' has been intentionally de-listed from the area of the box that describes the contents and has been removed from the instructions as well. Although this kit does not have an 'S' on it, I have included it as an 'S' kit since it is from that time frame and shares the common box art theme.
Metal Model Kit, Box Condition: Good
$24
From the 1950s. NOTE: builder kit only, please read carefully. This is an metal kit that is 9 inches long and 3.5 inches high when assembled. It is in big 1/16 scale and is a companion piece to other Civil War field gun kits #1125, 1126, 1127 and 1128. This model has not been assembled but the main parts have been neatly painted. NOTE: there are no instructions or plans of any type. Although I can verify that all the main parts are there, this is a detailed kit with many fittings and I cannot verify if they are all present or not. Sold as-is.
Vacuform Model Kit, Box Condition: Good
$18
Very high quality vacuform kit from about 1987. Features recessed panel line detail and raised detail were appropriate, full cockpit, optional position landing gear, prop, clear canopy and more. Never started and complete with all parts and plans. Vacuform kits are not recommended for modelers who do not have experience building them.
Vacuform Model Kit, Box Condition: Sealed Exc
$12
Still factory sealed. Well detailed, quality vacuform kit. Not recommended for builders who have no experience with vacuform kits.
Plastic Model Kit, Box Condition: Exc
$36
Ex-Lincoln molds. Very close to 1/144 scale. Good detail and complete decals including all pin stripes. Never started. Factory sealed bag or inventoried 100% complete with all parts, decals and instructions.
Plastic Model Kit, Box Condition: VG
$69
Very rare; not even listed in John Burn's guide. Small scale kit that measures about 6.6 inches long when assembled. The kit is basic, featuring only 10 plastic parts. It is also designed for motorized operation, and comes with a big slow-rpm prop, rubber motor and torpedo-shaped weight holder and weight that hang from the bottom when you wish to operate it. The kit has never been started. The parts are still in the internal factory sealed bags and includes instructions. The instructions are on the bottom of the box top.
Plastic Model Kit, Box Condition: Exc
$179
Rare, Brooklyn-produced, early 1950s U-Ma-Kit. This was Aurora's first naval model. Molded in the correct glossy very dark gray plastic and includes a display stand and decals to match the box art. Never started and complete with all parts, 'very good++' condition decals and 'near mint' instructions. The box has excellent color, four solid corners with no repairs, no fading and no price tags. The only tape is the factory sealing tape on the long sides. There is a light grease pencil price at the top center as shown and general shelf/edge wear.
Plastic Model Kit, Box Condition: Sealed NM
$95
Still factory sealed. Ex-Allyn molds. Rare kit showing the original subsonic configuration of the prototype F-102 before the Area Rule 'Coke Bottle' fuselage. With two decal sheets and stand. Aircraft builds to in-flight configuration and includes display stand.
Cardstock Paper Model Kit, Box Condition: Sealed NM
$16
Heavy cardstock, quality paper model kit that is completely pre-colored. Includes numerous detailed assembly drawings and full instructions (in Polish). Google Translate works great for this - I typed in a few lines and got English instantly. The kit has never been started and is complete and uncut. The scale is a guess only; several builders on-line have also reported it to be this scale.
Wood Model Kit, Box Condition: Sealed Exc+
$18
Still factory sealed. Easy Built was a Canadian manufacturer who made excellent reproductions of classic flying designs from the 1930 and 1940s. Original plans were used. High quality modern kit made in the finest tradition of the stick and tissue flyers. Features high quality printed balsa, strip wood, propeller, rubber, full sized plans and other accessories.
Plastic Model Kit, Box Condition: Sealed Exc
$635
This is a factory-sealed case of 12 Hobby-XV-3 model kits from the 1950s. Hobby-Time shipped them to the address on the box, and I purchased them from the man at that address. The case has never been opened and is still securely sealed top and bottom with the factory tape. The box is in 'excellent' condition. The actual model kits (12 inside the case!) are the one and only issue of this amazing aircraft. This is a very nice kit for that time with fine raised panel lines, interior detail and molded in gloss silver and clear.
Plastic Model Kit, Box Condition: Good
$22
Small scale ship kit from the Table Top Navy series. Very nicely done kits for their time. Can be built full hull or waterline. Features propeller and shaft detail, separately molded turrets, stacks, many superstructure parts and more. The kit has never been started. It has been inventoried complete with all parts and instructions. Many of the Pyro kits came from Eagle (then Eaglewall) molds in England. Eaglewall went out of business around 1962 and Pyro acquired at least some of the molds. Pyro reissued some of these kits in the mid 1960s with AJ Rudisill artwork. Evidently the line was successful, as Pyro then cut some of their own molds and expanded the series significantly. The earlier issues have the full color artwork and a three digit part number. Later issues have a 'B' or 'C' in front of the three digit kit number; some have simplified box art that is a modification of the original Rudisill paintings by painting out most of the background. Pyro issued these kits into the late 1960 when Life-Like took over the molds. Some were reissued by Life-Like.
Wood Model Kit, Box Condition: Good++
$550
Dated 1954. Rare, desirable and very collectible. Classic early multi-media kit with a fantastic internal box presentation. The box top has excellent color and gloss but general wear as shown, two properly repaired (from the inside) split corners and a closed tear (also repaired) on the lower side. Inside, the kit is factory new. All of the factory cardboard presentation material is present and grades from 'mint' to 'excellent++.' Includes numerous plastic parts in red, gray, clear and black, four unopened glass bottle of Mono*Dope that are still good, an unopened tube of MonoGlue still in the original mint box, all prefabricated wooden parts including the amazing Monofoil wing, three sheets of die-cut and factory painted wood (unpunched), colored die-cut cardstock sheet, sandpaper, gun barrel plastic material, decals in amazing 'near mint' condition, 'near mint' instruction book and full size plans and even a miniature Monogram Catalog showing this kit and the entire Speedee-Bilt line for '54. The kit has never been started. It has been carefully inventoried 100% complete with all parts, paperwork, instructions, plans and decals. Amazingly, the celluloid plastic parts range from no warping to very slight warping (on two of the nacelles). This is very rare, as that type of plastic was unstable and warped easily over time. Before injection molded plastic kits were common, Monogram issued the famous 'Speedee-Bilt' and 'Super Kits' which featured injection molded details and precarved wooden parts. Of these, the Speedee-Bilt B-24 and B-17 were the finest. These kits are very rare today due to their relatively high original price of $4.95. This kit must be shipped insured.
Plastic Model Kit, Box Condition: Exc+
$1100
This model is a landmark in the history of Plastic Kits. The Varney Fleet Sub is the primary candidate for the first all-plastic ship kit made in the USA. The famous HO/O train manufacture, Varney, branched out into other scale model kits at the end of WWII. In late 1945, they introduced what are thought to be the first USA produced plastic model kits - the Fleet Sub and the PT-17 Stearman. Both kits were excellent scale models given the state of modeling at that time. However, Varney was 6 years too early. The Fleet Sub and PT-17 met a cool reception when it was introduced to retailers. Hobby Shops were not sure if it would sell, and did not know how to sell it. Consequently, most retailers would not order it and those who did put them where they were not seen by the public. Distributors stopped carry the kits due to a lack of reporders. The result was inevitable - they did not sell, and Varney pulled both kits from production very quickly. Varney was committed to cutting the molds on the LST and it was released in 1946 with the same result. That marked the end of Varney's venture into non-train scale plastic models. Varney dedicated all production to HO trains and in the late 1940s they sold the molds for the Fleet Sub, the LST and the PT-17 to O-Lin. The molds underwent modification (the hull was divided into two parts instead of one) and were released by O-Lin and Lindberg. This kit is a superb, investment-grade "excellent++" example. The box top has like-new color and gloss, four solid corners with no repairs, no tape or price tags, no marks from tape or tags and no tears or other litho damage. Flaws include very light and even edge wear (as shown), very slight 'dishing' inward and very light foxing on two box sides. Inside, the kit is still as it came from the factory. The yellow parts display is 'very good++' and the only flaw is the scuffing as shown. The small parts bag is still factory sealed and factory stapled to the yellow display. The glass display stand arm is tucked into its holder. The heavy one-piece molded hull is beautiful and in rare crack-free condition and cradled into the holder. The base was factory glued to the yellow display but has come loose. It also includes the unused factory tube of Testors cement in its own holder. Very large instruction sheet is near mint and folds out to illustrate construction and offers numerous display ideas for this new medium in hobby kits. Decals were not provided with the kit. This kit was made with gray injection molded details, glass stand arm and black injection molded stand and sub hull. I have seen versions with no paint on the base and hull; however, this one has the base and hull factory painted gray. The paint is in 'near mint' condition on the hull and 'excellent' on the stand base. A rare example of a classic kit. Shipped with insurance only.
Plastic Model Kit, Box Condition: Good
$69
Rare and likely from the late 1970s. One of at least two Kemziv issues, and probably the earliest of the two known. Large almost 1/48 scale kit of the popular and successful AN-2, the world's largest single engined biplane. The model has never been started and all parts are still sealed in the factory 'krinkle' clear plastic bags. Includes color insignia sheet and full instructions. The insignia are CCCP and Aeroflot for a civil AN-2 transport. This model is the Ex-MEE 1/50 AN-2 kit that was sold as a built up display model and a kit. Production ended at MEE in about 1984. Some molds passed to Genton at that point, and obviously Kemziv got them at some point. Thanks to Tom Marino for help on this.
Plastic Model Kit, Box Condition: Exc
$89
1958 first issue with dramatic hardbox artwork. The box has excellent color and gloss. Features optional position landing gear, movable wheels, four bombs, pilot figure and hinged cockpit canopy and refueling probe. The kit has never been started. Inventoried 100% complete including decals and instructions.
Wood Model Kit, Box Condition: VG+
$22
From the 1940s or very early 1950s. The scale is not given, but the wingspan is 8 inches. This is a higher-quality solid wood scale kit featuring all die-cut balsa parts, bread-and-butter fuselage constructions, die cut wings, printwood tail feathers and other parts, fully finished wheels, clear vacuform canopy (in like-new condition, very highly detailed plans with templates, step-by-step construction and even a painting guide. Never started and complete. The original part number of this kit was 25 S9, but the factory over-stamped it with the number listed.
Vacuform Model Kit, Box Condition: VG+
$16
Includes fuselage halves molded in clear for both helicopters. Basic kit only with fuselage. A certain degree of modeling skill is required to build vacuform kits. They are not recommended for beginners.
Vacuform Model Kit, Box Condition: VG+
$12
This kit is often used just for the conversion parts to transform the Airfix / MPC Banshee to the recon-nose variant. Builds either version of the Banshee. Basic vac kit that is nicely molded with recessed panel lines. Never started and complete. A certain degree of modeling skill is required to build vacuform kits. They are not recommended for beginners or builder without scratch building experience.
Keep link list open
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240