Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Aurora-ESCI M4A1 Sherman Africa/Pacific/European Decals, 1/72, 6205

Plastic Model Kit,   Box Condition: Exc+++

Sold   

Unusual Aurora issue from ESCI quality molds. Very high mold quality and over 105 parts. Features flexible treads, decals for all versions listed and optional parts. Never started. Factory sealed bag or inventoried 100% complete with all parts, decals and instructions.

Strombecker Bell X-1B Supersonic Rocket, 1/48, D30

Plastic Model Kit,   Box Condition: Exc++

Sold   

Strombecker was very well known for producing the finest pre-carved hardwood aircraft and missile kits, but they had a very short journey into the plastic model field. They made a total of 5 molds for plastic injected aircraft kits, the 1956 Sea Dart being the first. All were discontinued in the mid 1960s. One kit is this excellent X-1B. It is the rarer of the two releases as it contains the pilots bust molded into the fuselage (the other one does not). Includes full instructions with three photos of the real aircraft, full color decals and an application for the Strombecker Model-Makers Club. Kit features include landing gear, clear canopy and display stand. Never started. Inventoried 100% complete with all parts, decals and instructions. The instructions and decals are in 'as new' condition.

Geli North American Aviation X-15, 1/33, 9

Cardstock Paper Model Kit,   Box Condition: Exc++

Sold   

Large 1/33 scale X-15. Very nicely printed in full color on quality stock. Never used and complete with all sheets and instructions in excellent condition

Dare Boeing B-17F RC (Radio Control) 75.5 inch Wingspan Flying Model, 1/16, 520EL

Wood and Plastic Model Kit,   Box Condition: Exc+++

Sold   

One of the few, if not the only large scale B-17F kits for electric R/C. Wingspan is 75.5 inches and length is 56 inches - wing area is 715 sq. inches, flying weight (electric) is 76 oz for a wing loading of 15.5 oz/sq ft. Power is recommended as (4) 2.3:1 speed 400 geared motors on 8 cells. Designed for a minimum of 4 channels (ailerons, elevator, rudder and throttle). Features almost 200 very high quality balsa and hardwood laser cut wooden parts and 11 vacuform parts - 4 cowls, nose, upper turret, turbo chargers, ball turret. The kit has never been started. Internal factory sealed bag or inventoried 100% complete including plans/instructions.

Monogram Focke-Wulf Ta-154A-O Moskito - Pro Modeler Issue, 1/48, 85-5959

Plastic Model Kit,   Box Condition: Good+

Sold   

1999 Pro Modeler issue. Very highly detailed. Features all very fine recessed panel lines. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Meikraft Models Vought SB2U-3 Vindicator - (SB2U3), 1/48

Plastic Model Kit,   Box Condition: VG

Sold   

The Vindicator was the first cantilever monoplane to see US Navy shipboard service. First flown in 1934, 112 were build for the Navy, 57 for the Marines, 40 for the French Aeronavale and 50 served with the RAF as the Chesapeake. Injection molded main parts with metal tubular cockpit and metal details. Never started and complete. Kit did not come with decals but includes painting and marking guide for Battle of Midway aircraft.

Lindberg JU-87B Stuka, 1/48, 524-98

Plastic Model Kit,   Box Condition: Exc

Sold   

Late 1950s hardbox issue with Ray Gaedke box artwork. Molded in correct gloss medium green and clear, with the futuristic Lindberg 'V' shaped clear stand. For it's time, this was an excellent kit with fine panel and rivet detail. Features crew of two and seats, separately molded rudder and flap/ailerons, four small wing load bombs and a center bomb with 'swing arm' so that it would clear the prop in a dive. This kit has never been started. It is either still in the internally sealed factory bag or has been inventoried 100% complete with all parts, decals and instructions. Thanks to Dusty Rhodes for this information: The markings with this model, A5+HL, are from a -B2 (Trop.) captured intact in North Africa, 1941 and shipped to the Museum of Science and Industry in Chicago. It is still there today (2020). This may very well be the aircraft that Lindberg Skokie-based designers examined as a basis for this model.

AMT 1951 Chevrolet Bel Air 2 Door Hardtop - Stock or Dragstrip Screamer, 1/25, T295

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Still factory sealed. Can be built any one of two ways. Includes extensive customizing and street parts. Features detailed engine and engine compartment, opening hood, detailed underside, complete interior and rubber tires.

AMT Mustang GT Road Racer - Ford Mustang II Mach 1 - Stock or GT Versions, 1/25, T385

Plastic Model Kit,   Box Condition: Good++

Sold   

Dates from the 1970s. Well detailed kit build either version. Includes engine with optional air cleaners and headers, stock or GT wheels and tires, GT fuel cell, dual exhaust, GT racing or stock seats, GT Roll Cage, fire extinguisher, GT or stock dash, steering wheel and shifter and spoilers. The kit has never been started. Internal factory sealed bag or inventoried 100% complete including decals and instructions.

AMT Hang-Out 3D Action Scene 'Aw Chute' Wall Diorama, T613

Plastic Model Kit,   Box Condition: VG

Sold   

Very unusual and hard-to-find kit. Contains color photo backdrop for the Albatross and parachute and wood-grained plastic frame, injection molded Albatross and parachuting pilot. Includes original paints, brush and rope. Makes a great wall display. The model has not been started. The parts are either in factory sealed bag(s) or inventoried 100% complete with all parts and instructions.

Aurora John F. Kennedy Great American Presidents Series, 1/12, 851-149

Plastic Model Kit,   Box Condition: Sealed Mint

Sold   

Still factory sealed - very rare. 1965 hardbox 'tall box' issue. The seal is still intact with no splits, and the box is mint with no fading, creases or other defects - a wonderful investment-grade kit. The model is a wonderful diorama featuring a floor base, fireplace, color photo of PT-109, rocking chair, mantle books, book ends, US Flag and pole, and of course JFK.

Aurora Grumman S2F Hunter Killer - Tracker, 1/111, 288-39

Plastic Model Kit,   Box Condition: VG+++

Sold   

Hardbox issue from 1964 and from quality ex-Comet molds. Features fine recessed surface detail, rotating propellers, clear windows and a display stand. Comet has two S2F models; this is the smaller of them. Never started. It has been inventoried complete with all parts and includes decals and instructions.

Monogram USS Nimitz Nuclear Aircraft Carrier, 1/825, 3004

Plastic Model Kit,   Box Condition: VG

Sold   

Very nicely molded smaller scale full hull kit. Features display stand and an airwing with A-4 Skyhawk, F-4 Phantoms, F-14 Tomcats and F-18 Hornets. Never started. NOTE: missing small part #6, a crane base that could be made from stock plastic. Complete with all other parts, decals and instructions.

Revell Gypsy Dune Buggy, 1/25, 1294

Plastic Model Kit,   Box Condition: Sealed Mint

Sold   

1997 reissue of the classic 1960s kit. Features VW engine, optional Corvair engine, EMPI 14 Offset Wheels, EMPI Roll Bar, Speedwell Bucket Seats, EMPI extractor exhaust and EMPI Dual Manifold & Weber Carburetor Kits. Molded in plastic, chrome plate and clear.

Marusan F-86D Sabre Dog - JASDF - Factory Painted, 1/100, 425

Plastic Model Kit,   Box Condition: Exc+

Sold   

Small approximately 1/100 scale kit. This kit is completely pre-painted. It features a removable engine, engine stand, removable tail section with stand, pilot, clear canopy, landing gear and two drop tanks. The kit has never been started. The factory paint is mint because all parts are still sealed in the factory bags. Even the pilot is well painted as are the canopy frame lines. Complete with decals and instructions. I believe this kit was issued 2-3 years ago, but it is now out of production.

Monogram Grumman EA-6B Prowler, 1/48, 5611

Plastic Model Kit,   Box Condition: Sealed Mint

Sold   

Large scale (1/48) and highly detailed. Still factory sealed.

AZ Model Stinson L-5 (Consolidated OY-1) Sentinel In Korea - US Air Force / US Marines Aircraft #5 (Blue Overall) VMO-6 / US Marines Aircraft # 4 (Olive Drab Overall) VMO-6, 1/72, AZ 7275

Plastic Model Kit,   Box Condition: Exc

Sold   

Nicely detailed kit from ex-Sword molds. Includes optional fuselage and canopies for two different L-5 variants. Features full interior and decals for all three aircraft listed. The kit has never been started. All parts are still in the factory sealed bag including decals and instructions.

Amodel IAR-81C Romanian Fighter, 1/72, 72170

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Still factory sealed. Out of production. Very nicely molded kit features Kit has recessed panel lines and some raised features as needed, full cockpit and engine detail and markings for the box artwork aircraft.

Hasegawa McDonnell Douglas RF-101C Voodoo - BAGGED, 1/72, 1037

Plastic Model Kit,   Box Condition: No Box

Sold   

Bagged kit - no box. The box is shown for reference only. Nicely molded and detailed kit. Contains decals for the colorful aircraft on the box. NOTE: the wings and drop tanks have been assembled. Quality of assembly is excellent - there are no gaps and liquid glue was used. NOTE: missing pilot. Includes all other parts, decals and instructions. NOTE: instructions are photocopies.

Monogram F-51D (P-51D) Mustang Action Model - Four Star Issue, 1/32, PA77-198

Plastic Model Kit,   Box Condition: VG

Sold   

First issue of this classic 'Action Model'. Canopy opens and closes to show highly detailed cockpit. Tiny levers under the wings drop 2 bombs. Knob on the bottom rotates and extends/retracts main gear and tailwheel; all gear doors including tailwheel open and close automatically with the gear. Not only do these features sound great, but they work. My built kit is 30 years old and functions like new! Great detail. Never started. 100% inventoried complete with all parts, decals and instructions present. This kit has an interesting history. In 1961, Monogram introduced the 1/32 scale Phantom Mustang. This was a very ambitious project. The kit was transparent, highly detailed and included two electric motors. One motor raised and lowered the main gear and tail wheel while the other spun the prop. Two small levers on the base dropped bombs from the wings. It was molded in clear, silver, black, red and zinc chromate green. Although successful, the kit was expensive to produce and Monogram charged a hefty retail price of $4.98. As a way to create more revenue from the molds, Monogram cleverly created this kit - using some of the same molds as the Phantom Mustang. The silver parts tree was completely re-cut and does not match the Phantom version. The red stand, gears and motorizing features were simply left out and the model molded in solid colors. The gear retraction/extension features was retained, but not motorized. On the new silver parts tree they added a small knob (placed on the bottom of the wing) and the same for the bomb dropping mechanism. This lowered the price to $1.98 and this additional revenue hopefully helped pay down the original mold costs.