Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Frog Percival Proctor IV Trainer, 1/72, F341

Plastic Model Kit,   Box Condition: Good

Sold   

Never started. Factory sealed bag or inventoried 100% complete with all parts, decals and instructions.

Frog North American Sabre F-86E, 1/72, 321P

Plastic Model Kit,   Box Condition: VG+

Sold   

Rare early box issue. Never started. Factory sealed bag or inventoried 100% complete with all parts, decals and instructions. The box art a/c XB547 was ordered as part of an RCAF block but reallocated to the RAF during construction by Canadair. They were flown by No. 3 and 20 Squadrons and the Ferry Training Unit from 1952 through '58.

Monogram F-102 Delta Dagger Century Series with Resin TF-102 Conversion, 1/48, 5827

Plastic Model Kit,   Box Condition: VG+

Sold   

1990 issued Century Series Dagger with beautifully molded resin/clear conversion for TF-102 'Delta Dud' Trainer. Conversion includes one piece front replacement fuselage, intakes, instrument panel, panel hood, cockpit tub, two seats, canopy exterior parts, canopy and beautiful full decal sheet. Never started and 100% complete.

Pyro Steam Paddle Cutter Harriett Lane American Civil War - Civil War Blockade Runner (Cutter Lavinia), 1/124, 249-349

Plastic Model Kit,   Box Condition: Exc+

Sold   

The Harriett Lane was built in 1858 and named for President Buchanan's niece. The cutter was 180 feet long with a 30 foot beam and displacement was 670 tons. Armament consisted of 3-9 inch Dahlgrens and 1-30 lb Parrot Rifle. She was built at a time when steam was not fool-proof, so she is rigged for full sails. Harriett Lane served as the Presidential Yacht, the fired the first shot of the Civil War. She chased down blockade runners until Januray 1, 1863 when she was attacked by five Confederate Gun Boats and boarded. She was captured and renamed the Lavinia and was used as a blockade runner. Near the end of the war she caught fire at sea, and put into Havana Harbor. Federal forces took her again and rebuilt her in 1869 as the bark 'Elliot Ritchie'. She was abandoned at sea in 1884. Never started. Factory sealed bag or inventoried 100% complete with all parts, decals and instructions.

Pyro Gulf Star Tuna Clipper, 1/58, 264-349

Plastic Model Kit,   Box Condition: Exc

Sold   

Modeled from the two Tuna Clippers (sister ship is Sea Magic) of the Avondale Marine Ways Company of New Orleans. These hard-working boats and crews roamed the ocean year-around in a dangerous business. Many vanished without a trace. The Gulf Star was wrecked on a reef off Peru. Model has a hull length of 13.5 inches. Never started. Factory sealed bag or inventoried 100% complete with all parts, decals and instructions.

Tamiya M60A1 Medium Tank Motorized, 1/35, MT328-598

Plastic Model Kit,   Box Condition: Exc

Sold   

Motorized kit. Never started. Parts sealed in factory bags. No motor but gearbox is present. Decals have been cut. Contains many extra parts (unsealed) from another kit.

Nitto Boeing 767 American Airlines - ANA and Ansette, 1/100, 13016-3200

Plastic Model Kit,   Box Condition: Exc

Sold   

Hard to find. Largest 767 kit made. Huge decal sheet for three airlines. Never started. Factory sealed bag or inventoried 100% complete with all parts, decals and instructions.

Revell Battleship USS Massachusetts, 1/720, 05031

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Optional waterline or full hull model. Features movable turrets, two Kingfisher floatplanes and detailed deck/superstructure. Still factory sealed.

Hasegawa Northrop F-5A Freedom Fighter Candian or Netherland Air Force Markings, 1/72, AO16-250

Plastic Model Kit,   Box Condition: Exc

Sold   

1980s issue. Never started. Factory sealed bag or inventoried 100% complete with all parts, decals and instructions.

Hasegawa Messerschmitt Bf-109 E-3 Spanish Air Froce, 1/72, AP114

Plastic Model Kit,   Box Condition: Good

Sold   

Limited edition. Never started. Factory sealed bag or inventoried 100% complete with all parts, decals and instructions.

Hasegawa Focke-Wulf Fw-190 A-6 'Galland', 1/72, 00268-1200

Plastic Model Kit,   Box Condition: Exc

Sold   

Some high quality assembly: belly tanks haves and wing halves neatly glued. No other assembly and no paint. All parts present except pilots control stick. Decals and instructions are mint.

Aurora De Haviland DH-10 Bomber 'Parents Magazine' Seal Box, 1/48, 125-198

Plastic Model Kit,   Box Condition: Exc++

Sold   

1950s issue with classic Jo Kotula box art. This is the edition with the Parent's Magazine approval seal. Box is in excellent condition. Never started. Factory sealed bag or inventoried 100% complete with all parts, decals and instructions.

Revell Clipper Stag Hound 'The Largest Merchant Ship of Her Day', 1/216, H345-400

Plastic Model Kit,   Box Condition: Good++

Sold   

The Stag Hound was designed by the famous Donald McKay and was launched on December 7, 1850. She is famous for her great speed and turned a nice profit for her owners. The most notable event was when the Stag Hound was asked to take a copy of President Lincoln's inaugural address to London. During this run, she raced the steamer 'America' and won easily. Shortly after this she was lost off Brazil to a spontaneous combustion of her coal cargo. The crew successfully abandoned ship. The captain was the last to leave. He lowered the American Flag, wrapped it around himself and jumped overboard. Very nicely detailed like all early Revell sailing ships. Kit is 100% complete but has some painting and assembly. Paint will need to be stripped in brake fluid (DOT 3). Painted areas: lower hull painted copper, deck painted dark wood and misc deck fittings painted. Paint is neatly done with the exception of the hull copper. Assembled areas: several small deck fittings and two deck houses. Quality of assembly is very good and clean.

Testors Visible Dodge Hemi 426 Motorized Engine, 1/4

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

300 piece detailed kit has working valves, pistons and crank shaft, all operable by electric motor. Authentic Hemi sound chip. Visible parts allows you to see it work. Never opened; still factory tape sealed.

Monogram B-24J with Resin PB4Y-1 Privateer Single Tail Conversion and True Details Resin Wheels - (PB4Y1), 1/48, 5608

Plastic Model Kit,   Box Condition: VG+

Sold   

Monogram B-24J is complete and unstarted. Includes mint condition rare and correct Concise Models PB4Y-1 Single Tail Privateer Conversion, which is one of the most accurate conversion produced. Conversion is in resin with clear vac blisters and has full size plans and full instructions. This is a VERY extensive and correct conversion for experienced modelers only. Also included are True Details resin flattened and bulged tires.

Microscale B-24J Decals for (2) aircraft of the 90th BG 5th AF - and 1 aircraft of 491 BG - 8th AF, 1/48, 48-32

Other Materials,   Box Condition: VG+

Sold   

Decals are in mint condition. Colorful markings for the Monogram/Revell Liberator kit.

Graupner 42' Long Graf Zeppelin Aircraft Carrier for Radio Control, 1/250, 2077

Wood Model Kit,   Box Condition: Fair

Sold   

Very rare and large kit of the 'Flugzeugtrager A' or 'Aircraft Carrier A". This German WWII carrier has a fasinating history. She was laid down in 1936, and launched in 1938. Raeder pressed for proper fitting out and completion, but ran into continuous and powerful resistance from Goring, who did not like the idea of the Navy having a mobile air-arm. Goring's interference proved conclusive and the ship, which was 95% complete, never entered service. The air wing was to be navalized Bf-109 Fighters and Ju-87 Dive Bombers. Work stopped completely in 1943 as Hitler became frustrated with the Navy. On April 25, 1945, the Germans scuttled the nearly complete carrier at Stettin just before the Russians arrived. What happened next has been unclear for years. It was generally assumed that the ship struck a mine and sank after the Soviets raised her. With the opening of Russian records, this story can be completed. In 1946 the Soviets raised the ship and towed it to Leningrad. There, they hoped to rebuild it and use it for it's intended purpose. This proved to be impossible at the time, so in 1947 it was towed to sea and used as an target. In 2006, the wreak was actually located. Kit has never been started and is complete. Primarily wood construction. Includes large plans and English Instruction book. For Radio Control. Box is missing one side panel and is only fair.

Czech Model Flettner Fl-265 Bagged, 1/72

Resin Model Kit,   Box Condition: Fair

Sold   

Hard-to-find limited production craftsman kit. Czech Model (Czech Masters) kit are known for accuracy and fine, scale detail. Parts are cast in high definition resin and feature very fine recessed panel line detail. Kit is neatly started and complete. Due to the small size of some parts, these kits are recommended for the experienced model builder. Kit does not come with instructions, but assembly is very straight-forward. Decals must be furnished by the builder.

Czech Model Hansa Brandenburg UFAG Bagged, 1/72

Resin Model Kit,   Box Condition: Fair

Sold   

Hard-to-find limited production craftsman kit. Czech Model (Czech Masters) kit are known for accuracy and fine, scale detail. Parts are cast in high definition resin and feature very fine recessed panel line detail. Kit is never started and complete. Due to the small size of some parts, these kits are recommended for the experienced model builder. Kit does not come with instructions, but assembly is very straight-forward. Decals must be furnished by the builder.

RCM Mc-202 / Mc-205, 1/32

Vacuform Model Kit,   Box Condition: Bagged

Sold   

SPECIAL ORDER vacuform kit. Not shipped from stock. Kit is molded upon receipt of payment. Time from receipt to shipping your kit is usually 8 to 10 weeks. Kit includes resin and/or metal details -clear canopy and full size plans/instructions. Details included will vary from kit to kit but may contain landing struts - wheels - props - engines (not jets) - some cockpit parts - seats - etc. Other parts will need to be scratch built or from your spares box. Decals not furnished. Vacuform kits are only recommended for modelers who are experienced with this type of model. Special skills and scratch building experience are required. If you are curious, I highly recommend that you read the article 'How To Build Vacuform Model Kits' which is located on this website.