Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Revell Wright Cyclone Engine (ex-Monogram), 1/12, 8881

Plastic Model Kit,   Box Condition: Good

Sold   

1991 issue of the famous Monogram Four Star Model from the late 1950s. The Cyclone was very dependable and powered numerous famous aircraft, the DC-3 and B-17 being just a few. Very highly detailed. Molded in three colors as the original and has all the same working features: movable prop, extra parts to show cutaway working piston and tilting test stand. The kit has never been started. The parts that Revell sealed are still in the sealed bags. The parts that were never factory sealed have been inventoried and are missing the following: one engine stand lockpin (#65), one engine stand bushing (#65) and two (#36) piston halves. The piston halves are not visible unless you use the optional cut away cylinder, and the bushing and pin can be made from stock materials. Otherwise inventoried with all other parts, decals and instructions present. Mold swapping between Revell and Monogram started soon after the same European holding company bought them both.

Eagles Talon Northrop M2F2/3 Lifting Body - (Aircraft from the Opening Credits of 'The Six Million Dollar Man') - Bagged, 1/72, ET120-83

Vacuform Model Kit,   Box Condition: Sealed

Sold   

Still factory sealed. This is the aircraft from the dramatic crash footage during the opening credits each week on the TV series 'The Six Million Dollar Man'. Includes decals. Very high quality complete kit. Features fine recessed detail and panel lines - better detail than many injection molded kits. Includes full plans/instructions. Certain modeling skills are required to build vacuform kits. Not recommended for beginners.

Revell Apollo Saturn V Moon Rocket, 1/96, 04805

Plastic Model Kit,   Box Condition: Sealed Exc+

Sold   

Still factory sealed. Out of production. The Revell Saturn V is the finest large-scale injection-molded kit of this legendary workhorse. Model actually comes apart and each sequence configuration of the Apollo Mission can be demonstrated with this model: Lift Off, 2nd stage, 3rd stage, separation, docking, lunar orbit, lunar module separation, lunar descent, lunar exploration, lunar lift-off, docking, starting for earth, separation, and reentry/recovery. Includes a clear panel so you can view the stowed lunar module.

AMT 1929 Ford Model A Pick Up Truck or Woody Wagon - Custom or Stock, 1/25, 6518

Plastic Model Kit,   Box Condition: VG

Sold   

1987 issue. This model also includes a period scale model bicycle. The truck includes all parts need to build this kit one of four ways - Stock Pickup Truck, Custom Pickup Truck, Stock Woody Wagon or Custom Woody Wagon. Features detailed 200 CID 4 cyl flat head or Ford Flathead V-8 engines, detailed engine bay, two sets of rubber tires, full suspension, spoke wheels or Mag wheels, stock and custom dashes and steering wheels, full exhaust, complete interior, side mount spare tire, optional convertible top, removable hood and two custom decal sheets. The kit has never been started. Inventoried 100% complete including decals and instructions.

Lindberg Fulton's Clermont Side-Wheel Powered Steamboat Motorized, 1/96, 708M-269

Plastic Model Kit,   Box Condition: Exc

Sold   

Original issue from the late 1950s with Ray Gaedke artwork. Hard box is in excellent condition with vibrant colors. Large 18 inch long, 186 piece kit with excellent detail and realistic motorization. Complex gears work as the real boat to turn the paddles. large scale (1/96) for excellent detail. Features detailed deck, figures and full rigging instructions. Never started. NOTE: missing one flat rectangular windows. These can be made with flat, clear plastic stock which I have included plenty of. Otherwise inventoried with all other plastic parts, motorizing parts, flags and instructions present.

Revell USS Tacoma Jet-Powered Patrol Gunboat (Asheville Class), 1/130, H432

Plastic Model Kit,   Box Condition: Good

Sold   

Large scale and well detailed kit of this low-draft turbine-powered gunboat. Features moving guns, turret, display stand and flag sheet. Never started. Factory sealed bag or inventoried 100% complete with all parts, decals and instructions. NOTE: the kit is complete, but the stand name plate says 'Defiance', which was another ship of this class. The decals say 'Tacoma'.

Monogram Phantom Mustang F-51D (P-51) See-Thru Working Model, 1/32, PA67-498

Plastic Model Kit,   Box Condition: Good++

Sold   

First issue of this all time classic. Hardbox is dated 1961. Widely considered to be one of the best visible airplane action kits ever made. Features a full cut away model with interior detail. Buttons on the base activate two motors that make the prop spin, and the main gear and tail wheel retract and extend. Two other levers on the base drop the wing bombs. Inside, this kit is in mint condition. All of the special presentation cardboard is as new and the two motors are still sealed. The kit is molded in the correct first edition shades of clear, red, black, silver and zinc chromate green. The kit has never been started and is inventoried complete with all parts present. Instructions and decals are correct for the first issue and feature the 'Horse' stand decal.

Xonex The 'Jetliner' Classic 1952 Bicycle - Die Cast Assembled Model, 1/6

Multimedia Model Kit,   Box Condition: Exc

Sold   

From 1990. This is a completely assembled die-cast bicycle that was limited to 10,000 production units. Measure approximately 12 by 6 inches. Features metal, plated and plastic parts, movable whitewall tires, chain and handlebars, rotating pedals and revolving crankshaft, detailed reflectors, decals and streamers, realistic tail light and Jet-Liner front lamp, spring action comfort saddle seat and operating kickstand. The model is still internally sealed in styrofoam - it has never been removed.

Fujimi Douglas TA-4F / TA-4G Skyhawk - Royal Australian Navy TA-4G / H & MS-11 Marines Headquarters & Maintenance Sq or Navy VF-126 RCVW-12, 1/48, 5A12-500

Plastic Model Kit,   Box Condition: Exc++

Sold   

Large scale (1/48) kit of an unusual subject. Very well molded. Includes decals for the Royal Australian Navy TA-4G and both US Squadrons. The kit has never been started. Internal factory sealed bag or inventoried 100% complete including decals and instructions.

Hobby Craft Lockheed RT-33A Recon Thunderbird - Bagged, 1/48, HC1596

Plastic Model Kit,   Box Condition: No Box

Sold   

Bagged kit - no box. The box is shown for reference only. 1/48 scale kit with all recessed panel lines, tip tanks, cockpit detail, two piece canopy and more. This kit has never been started. Missing decals. Inventoried with all parts and instructions.

Monogram Boeing B-52D Stratofortress, 1/72, 8292

Plastic Model Kit,   Box Condition: Poor

Sold   

Please read carefully - builder kit only. 1973 issue. The visual effect of the SAC 'Anti-Nuclear Flash White' is shown well in the box art. Contains 207 parts. Very nicely detailed. Contains decals for SAC or camo versions. Features crew of three, detailed cockpit, elevating and traversing rear turret, opening and closing bomb bay doors, operating wing flaps, operating spoilers, optional position entry hatch and landing gear, and optional parts to display one nacelle open to show the jet engine. The kit has never been started. Inventoried 100% complete including decals and instructions. NOTE: Box is present but heavily water damaged. Parts inside are in excellent, as new condition. Decals are peeling due to water damage. Instructions are intact and can be used but show damage.

Koster PB4Y-2 Privateer Conversion for the 1/48 Monogram B-24 - (PB4Y2), 1/48, 19

Multimedia Model Kit,   Box Condition: Exc

Sold   

Very high quality full conversion that makes a single-tailed Privateer from the Monogram/Revell B-24 kit. Includes all required parts in white and clear vacuform and high-definition cast resin or metal (depending on the production run). Vac parts have very fine recessed panel lines and better quality than some injection molded kits. Resin/metal parts include very beautifully cast engines and correct cowls, super detailed turrets that are small kits to themselves, machine guns, ammo belts and holders and more. Also has full instructions and pinup art decals for 'Abroad For Action', 'Lady Luck III' and 'Redwing'. Includes very detailed instructions and full size plans as well as detail views. Never started and 100% complete. Conversion kit only - designed for Monogram B-24 kit which is not included.

Monogram 1965 Chevrolet Corvette Stingray Coupe, 1/8, 2600

Plastic Model Kit,   Box Condition: Sealed Exc+++

Sold   

Still factory sealed. Still has the 'Two Guys' toy department price sticker. From 1975. Very large 1/8 scale model that measures 22 inches long when assembled. Nicely detailed and well molded kit. Features complete 327 CID Fuel Injection engine and detailed engine compartment, opening hood, exhaust, suspension and chassis detail, steerable front wheels, complete interior, headlights that open and close and more. Molded in bright gloss red, black, clear and chrome and with real rubber tires.

MPC Universal Dune Buggy (Jeep) - Off Road 4 Wheeler / Stock Universal / Service Car, 1/25, 405-200

Plastic Model Kit,   Box Condition: Exc++

Sold   

Nice kit from the 1970s. Features parts and accessories for three different versions. Builds up an actual rolling chassis just like the real vehicle. Includes custom parts such as push bar, trailer hitch, snow tires, custom pipes, 4bl carb, clear top, side mirrors and more. Features detailed complete engine, engine compartment, opening hood, full interior, opening tailgate, rotating wheels, exhaust and underside detail. Molded in white, clear, red tinted clear, and chrome. With real rubber tires. The kit has never been started. Internal factory sealed bag or inventoried 100% complete including decals and instructions.

MPC The Swamp Buggy 'Gator Country' Jeep - Stock or Custom, 1/25, 407-200

Plastic Model Kit,   Box Condition: Exc++

Sold   

Rare kit of the legendary Jeep. Can be built as a stock civilian model or the 'Gator Country' version. Includes stock engine, custom engine accessories, full suspension and exhaust detail and builds an actual rolling chassis just like the actual vehicle. includes full stock and custom interiors as well as body panels and tires. The kit has never been started. Internal factory sealed bag or inventoried 100% complete including decals and instructions.

Sterling Golden Hind - 9.75 inch long Solid Wood Ship Kit with Cloth Sails and Metal Fittings, G5

Wood and Metal Model Kit,   Box Condition: Sealed Mint

Sold   

Still factory sealed. In the late 1970s/early 1980s Sterling issued these simplified wood kits for beginners. They included a completely carved hull with very little sanding needed to complete. Also included are full size plans, instructions, rigging diagrams, cloth sails and metal fittings. I remember building some of these - it was an ideal project for someone who had never built a solid wooden kit but wanted the experience.

UPC McDonnell F4H-1 (F-4C) Phantom II, 1/50, 5090-300

Plastic Model Kit,   Box Condition: Exc

Sold   

This kit represents somewhat of a mystery. We know that UPC did not make any of their own tooling, but the mold origin of this kit is unknown. In an apparent cost saving measure, the large box re-uses the same Scott Edison box art from the 1/72 UPC F-4 which is an ex-Hasegawa kit. The dramatic box art claims this is a F-4C; however, the instructions state that it is an F-4H-1. Since they are a copy of the original manufacturers instructions, I believe the instructions. The kit is interesting for it's level of detail. It includes the fuselage fuel tanks and two detailed engines. The cockpit includes ejection seats, two pilots, side instrument panels, control stick, main panels and opening canopies. Rudders, ailerons, flaps and elevators all move and the wings fold as well. There are internal wing fuel tanks. The landing gear retracts and all gear doors close also. The nose can be removed to display a detailed radar package. A wide choice of wing and fuselage loadouts is provided, with numerous AIM-7 Sparrow missiles (body mounted and on wing pylons), iron bombs and a centerline drop tank. There is one large decal sheet with two decal choices - 'FJ-199' USAF as shown on the box art, and a US Navy aircraft from VF-102 USS Enterprise. The model has not been started. NOTE: missing both pilots. Inventoried with all other parts, decals and instructions.

Italeri B-57B Canberra Night Bomber, 1/72, 144

Plastic Model Kit,   Box Condition: Sealed Exc++

Sold   

Still factory sealed. Well detailed with 115 parts. Optional position canopy and landing gear. Features rotor bomb bay detail with optional position doors and full internal bomb load and underwing pylons with weapons.

RCM Lockheed Hudson, 1/48

Vacuform Model Kit,   Box Condition: Bagged

Sold   

SPECIAL ORDER vacuform kit. Not shipped from stock. Kit is molded upon receipt of payment. Time from receipt to shipping your kit is usually 8 to 10 weeks. Kit includes resin and/or metal details -clear canopy and full size plans/instructions. Details included will vary from kit to kit but may contain landing struts - wheels - props - engines (not jets) - some cockpit parts - seats - etc. Other parts will need to be scratch built or from your spares box. Decals not furnished. Vacuform kits are only recommended for modelers who are experienced with this type of model. Special skills and scratch building experience are required. If you are curious, I highly recommend that you read the article 'How To Build Vacuform Model Kits' which is located on this website.

H&F Model Airplane Co The Rocketeer 'A' - 65 minutes at the Nationals - 40 inch Wingspan Free Flight Balsa Model Airplane

Wood Model Kit,   Box Condition: VG

Sold   

Rare kit from the 1940. The Rocketeer flew a record setting 65 minutes at the Nationals either in '39 or '40. She has a NACA 6509 airfoil and climbs at 2200 fpm and glides at 14-1. This model came from the estate of a very active and particular early aircraft kit collector. It is like factory-new inside and has not been started. Complete with all parts, plans and decals (if originally included).