Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Hasegawa 1/700 Scale Nakajima Type 90 (Quantity 9) / Mitsubishi Bomber type 13 Mod 2 (9), 1/700, QG23

Plastic Model Kit,   Box Condition: Exc

Sold   

Very high quality 1930s aircraft for interwar Japanese aircraft carriers. Ideal for Hosho, early Akagi or Kaga. Very well molded with a very large and extensive decal sheet. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions. Includes color painting guide on the back of the box.

Megow Focke-Wulf FW-190 - Wooden 12 Inch Wingspan Free Flight (Catapult or Hand Launch) or Line and Reel Glider, SC-6

Wood Model Kit,   Box Condition: Good+++

Sold   

Unusual wartime Megow profile glider kit. Wingspan is approximately 12 inches. The quality and scale is excellent for this type of kit. Includes all parts on quality balsa printwood, metal eyelet in the original wax paper holder, full color insignia and complete assembly instructions with painting and flying guide. The nose is heavily reinforced with three layers of balsa. Flying instructions include hand launching, catapult and controlled flying with a cord and pole as well as with a fishing rod and reel (the metal eyelet is used for these last two methods. The kit has never been started. Inventoried complete including all parts, insignia and instructions. The complete series of SC-1 through SC-6 consists of the P-51, F6F, P-47, F4U, Zero and FW-190.

Maircraft Fokker D-VIII Flying Razor Solid Wood Model Airplane, 1/48, S22

Wood Model Kit,   Box Condition: Good++

Sold   

Maircraft was originally founded in the early or mid 1930s by Gordon Christoph and went by the name Aircraft Model Company. The company produced a typical line of solid 'profile cut' kits that required the usual high talent levels for carving and finishing. A former Comet Model Airplane & Supply Co. salesman, Jack Mair, bought the company in the early 1940s and renamed it Maircraft. This company was one of the handful of solid kit producers who issued models in a consistent 1/48 scale during the 1930s and 1940s (others included Hawk and Dyna-Model). This lead to one of the most desirable and rare model kits ever produced in the USA - the wood/plastic 1/48 United DC-3 model issued immediately after World War 2. Other than the P-61 and a few other Maircraft offerings, most were simple kits that sold for the low price of about 35 cents and gave the owners many hours of pleasurable work. This kit features a full size plan with instructions steps, fuselage that is about 80% cut, profile cut parts, printwood and a small bag of details. The model has not been started. The parts are either in factory sealed bag(s) or inventoried 100% complete with all parts and instructions.

J Roberts AU-1 (F4U) Corsair - 34 Inch Wingspan Flying Model, 1/14, JRS-2

Wood Model Kit,   Box Condition: VG

Sold   

Rare J. Roberts 'Flight Control' Model Mfg. Co. kit from Baker, Oregon. This is a fascinating and well designed kit with a very large degree of prefabrication. There is no fabric covering - everything is covered with wood. The engineering is fascinating. The wooden fuselage skins, for example, are in two parts (left and right) and are 100% formed, cut and shaped single sheets. The gull wing panels for the wing are fully shaped and cut, and the leading edge wing spar is fully shaped from balsa. The rudder and elevator are completely precut, as are numerous other parts that are fully shaped. Also features a spun aluminum cowl, formed canopy, shaped leading and trailing edges of balsa and hardwood, full color fuel proof decals, die-cut balsa parts, wire control linkage, full size plans and more. The kit has never been started. Inventoried 100% complete including decals and instructions. J. Roberts line creator was J. Robert Smurthwaite. Bob Smurthwaite was a life-long Control Line flier and competitor who originated the three-line throttle controlling hardware, which was a matched set of a bellcrank for three lines and matching three-line handle. He created and sold several iconic kits, like the Martin AM-1 Mauler, designed for Control Lines Navy Carrier Event. His kits set a very high standard for the industry and are considered second only to the Lou Proctor line (which are considered museum grade). In the early 1990s Bob Smurthwaite closed the factory down. He passed away in 1992.

Entex 30 Foot Sloop, 1/20, 7004

Plastic Model Kit,   Box Condition: Exc

Sold   

Highly detailed and large scale (1/30) sailing ship kit. Features full rigging, chrome plated parts, optional soft sails and display stand. Kit has minor assembly: keel and life jacket 1/2s have been assembled. Quality of assembly is excellent with no gaps. No other assembly. Kit is 100% complete with all parts, decals sails and instructions.

AMT Martin B-26B Marauder, 1/48, 7002

Plastic Model Kit,   Box Condition: Good-

Sold   

Rare large scale "B" variant. Kit features complete and very highly detailed interior, optional position landing gear, wheel well details, complete bomb bay with optional position bomb bay doors, rotating turrets with elevating guns, rotating props and wheel and crew of three. Never started. Factory sealed bag or inventoried 100% complete with all parts, decals and instructions. NOTE: decals are water damaged.

Academy Boeing B-52H Stratofortress with GMA-87A Skybolt / AGM-69 SRAM / AGM-28 Hound Dog / ADM-20 Quail Missiles, 1/144, 4432

Plastic Model Kit,   Box Condition: Exc

Sold   

Very popular kit from ex-Crown molds. From 1993. Excellent model with a huge array of extras. Has all recessed panel line detail. Features all the missiles listed and 5 extra clear display stands for each. Has decals for camo aircraft shown on the box artwork. NOTE: the the interior parts have been neatly airbrushed the correct gray and silver, as well as the outrigger gear and intakes. Painting is of excellent quality and there is no other painting. NOTE: the elevator halves, one wing half, two wing tanks halves and the cockpit floor have been assembled. Quality is 'excellent' and there is no other assembly. Inventoried complete with all parts, decals and instructions. The Skybolt was a plan to deliver an ALBM (Air Launched Ballistic Missile) from a B-52 to greatly enhance it's survivability. Skybolt failed 5 of 6 initial tests, but finally was successful. However, the program was canceled due to the availability of the Polaris SLBM. Plans to equip the RAF Vulcan with Skybolt fell through and left with British with no modern nuclear force, causing them to adapt the Polaris SLBM and passing strategic nuclear capability from the RAF to the RN. AGM-28 Hound Dog was a sleek design to help B-52 penetrate thick SAM defenses. Hound Dog could use it's engines to help the B-52 during take off and then could be refueled from the B-52's tanks. This was an important point as the B-52 carried 2 of these missiles at 5 tons each. Hound Dog had a range of 200 to 500 miles (depending on launch height) at Mach 2.0 and an accuracy of one mile at those ranges. The warhead was 4 megatons. SRAM was a nuclear-armed short range missile carried in quantity of 20. SRAM was designed to blast holes in defenses in front of the B-52 and for the final target. Quail was a decoy that would mimic the B-52 with radar reflectors, infrared, radar repeaters and chaff decoys. Quail did reach operational status and operated on some Hound Dog-equipped B-52s.

Testors Northrop F-5F Tiger II Two Seater - USAF Aggressor Williams AFB / US Navy Aggressor 'Top Gun' Miramar NAS November 1979, 689

Plastic Model Kit,   Box Condition: VG

Sold   

Nicely molded kit from 1984. Features fine raised panel lines, good dual cockpit detail, optional position canopies, detailed gear wells and landing gear, wing tip AIM-9 Sidewinders and optional under wing and centerline drop tanks and wing mounted bombs. Includes decals and paint guide for both aircraft. NOTE: the interior surfaces have been neatly airbrushed the correct silver and gray. The struts and wheel hubs have been airbrushed dark silver. Quality of paint is excellent. NOTE: the drop tank halves have been assembled. Quality of assembly is excellent. There is no other assembly or painting. Inventoried complete with all parts, decals and instructions.

Entex Lockheed L-1011 TriStar - TWA or Delta Airlines, 1/100, 8455

Plastic Model Kit,   Box Condition: Exc

Sold   

The largest injection molded kit ever made of the L-1011. Over 24 inches long when assembled. Well-detailed kit. Features a very large TWA and Delta decal sheets. The kit has never been started. Internal factory sealed bags including decals and instructions.

Revell SS Doctor Lykes 'Passport to Pleasure' Cargo Liner, 1/400, H335-169

Plastic Model Kit,   Box Condition: Exc++

Sold   

Rare. 1961 'Ships of the Seven Seas' and Master Modelers Club Series. Never started. Kit is either factory bag sealed inside or inventoried 100% with all parts, decals and instructions.

Eduard Fokker DR-1 (DR.1) Triplane - Strip Down, 1/72, 7013

Metal Model Kit,   Box Condition: Sealed NM

Sold   

Still factory sealed. Unique model shows the actual structural interior of the aircraft with 68 photoetched parts. There are also 21 injection molded parts such as engine, wheels, etc. Amazing detail. For the skilled modeler.

Lindberg Navy R4Y Samaritan (Navy C-131 Convair 340), 1/165, 458-49

Plastic Model Kit,   Box Condition: Exc

Sold   

Late 1950s Cellovision issue with Ray Gaedke box artwork. The R4Y is the US Navy version of the famous Convair Airliners. Includes full decals. Can be built as civil Convair 340 but modeler will have to provide his own decals. The kit has never been started. Inventoried 100% complete including decals and instructions.

Revell F-84F Thunderstreak Pre 'S' Kit with Two-Piece Stand (Early First Issue), 1/54, H215-79

Plastic Model Kit,   Box Condition: Exc++

Sold   

1955 Pre 'S' issue with dramatic box artwork. Please note this is a rare early issue with the unusual two piece stand. This stand has a base and arm, which proved to be very fragile in practice. Revell quickly changed this to the 4 piece stand and only the earliest kits have this two piece issue. Kit features rotating wheels, cockpit and pilot, 'Revelving' clear globe stand and is molded in gloss silver. Never started. 100% inventoried complete with all parts/decals and instructions present.

Historic Panzer PzKpfw 1A Modified - Panzergruppe Drohne Condor Legion Spanish Civil War 1937 / Spanish Army Modification 1938 / Bandera de Carros de Combate de La Legion (Spanish Civil War) 1938, 1/35, 35-003

Multimedia Model Kit,   Box Condition: VG+

Sold   

Very nicely detailed and molded kit. This model has parts to build it as a German operated Panzer 1A of the Condor Legion during the Spanish Civil War, or as a Spanish Army operated and modified. Features highly detailed suspension and bogie wheel system, optional position top and side crew hatches and more. Has decals for all three tanks listed. The kit has never been started. Internal factory sealed bag including decals and instructions.

Hasegawa Grumman F6F-3/5 Hellcat - (F6F5 F6F3) US Navy VF-17 or Royal Navy, 1/32, JS-081-800

Plastic Model Kit,   Box Condition: Good+

Sold   

Large, well detailed plastic model kit of the famous F6F Hellcat. Includes optional parts for -3 and -5 variants. Features fully detailed cockpit, machine gun bays with removable covers, highly detailed engine, positionable wing flaps, drop tank and rockets. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Verlinden CSS Atlanta - US Civil War Ironclad 'North and South' Waterline Series, 1/200, 2120

Resin Model Kit,   Box Condition: VG+++

Sold   

Beautifully cast kit in high definition resin. Very cleanly molded, large scale kit that has excellent detail. The kit has never been started. Inventoried complete with all parts, flags, stack guy wires and flag staff wire. Please note that there are no instructions for this kit. The kit is very simple, has only a few parts and can be easily assembled from the box top photo.

RCM IAR-80A, 1/32

Vacuform Model Kit,   Box Condition: Bagged

Sold   

SPECIAL ORDER large (1/32) vacuform kit with resin/metal parts set. Not shipped from stock. Kit is molded upon receipt of payment. Time from receipt to shipping your kit is usually 8 to 10 weeks. Contains vacuform basic airframe components, full size plans plus metal or resin parts such as wheels, prop, struts, etc. Does not include decals. Advanced modeling skills are required to build vacuform kits. Not recommended for beginners.

Monogram Ford Tri-Motor Island Airways (Trimotor) - White Box Issue, 1/77, 7592

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Still factory sealed. 1975 "White Box" issue of the old Four Star kit from the 1950s. The 1960s issue was for TWA, and this one is for Island Airways, a Lake Erie Regional Carrier. Very nicely molded and detailed kit.

Airfix Boeing B-17G Flying Fortress - A Bit O' Lace, 1/72, 05005-0

Plastic Model Kit,   Box Condition: VG++

Sold   

1980s Type Four logo issue. Dramatic artwork showing 'A Bit O' Lace' on a bombing run over Germany. Kit features many moving parts: turrets rotate and guns elevate, landing gear retracts and extends, wheels and props turn and all control surfaces move. The kit has never been started. Inventoried 100% complete including decals and instructions.

Airfix WWI German Infantry - Early Airfix HO / OO Figures, HO, S26-69

Plastic Model Kit,   Box Condition: VG++

Sold   

Early type two Airfix logo issue. Never painted or modified. Includes all 48 parts.