Be the first to know when kits are listed!
Plastic Model Kit, Box Condition: VG
$48
Earlier issue with a gloss box top. Very large and well detailed kit. Features full cockpit, moving control surfaces, beaching gear and much more. With the early and large Hasegawa display stand. The kit has never been started. All parts are still in the nternal factory sealed bags. Includes decals and instructions.
Resin Model Kit, Box Condition: Exc
$16
Very high quality limited production model cast in high-definition resin. Never started. The parts are still in the internal factory sealed bags and includes instructions.
Plastic Model Kit, Box Condition: Good-
$34
This highly advanced aircraft first appeared at the XIV Paris Airshow in 1934 . It was used successfully for many record attempts and was also pressed into service for WWII. This 1960s 'L' box style issue is well molded with recessed control surfaces, fine raised panel lines, very good cockpit and more. Includes markings and paint guide for two aircraft. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.
Plastic Model Kit, Box Condition: Good
$25
US Airfix edition dated 1980; the quality of this kit makes it a very popular builder even today. Nicely molded with all recessed panel lines and no rivets; includes parts for recon or fighter-bomber variants and decals for both aircraft. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Plastic Model Kit, Box Condition: Exc
$36
Hard-to-find 'Search and Rescue' version of this venerable Fokker Transport. Highly detailed and well molded featuring complete cockpit, full interior with all bulkheads, seating and SAR equipment consoles, external fuel tanks, rotating props and optional position entry door. NOTE: this kit has minor, 'professional' quality subassembly as follows: (2) seats, (2) control sticks and instrument panel to floor. There is no other assembly. Inventoried 100% complete and includes decals and instructions.
Plastic Model Kit, Box Condition: Good
$42
SALE!! Includes two kits in the one box shown. Both models are never started and inventoried 100% complete with all parts, decals and instructions present. This is the white box issue from 1973. Very nicely done 1/72 scale kits with pilot figure, optional position canopy, rotating propeller & wheels, drop tank, missile/bomb loadout and more.
Plastic Model Kit, Box Condition: NM
$24
Never started. Factory sealed bag or inventoried 100% complete with all parts, decals and instructions.
Multimedia Model Kit, Box Condition: Exc
$48
From 1964 and issued pre-zip code. This kit is one in a series of true-scale horse-drawn vehicles. The scale is not given, but the kit is large scale - it has 3" diameter wheels and the wagon body measures about 7" inches long without the front wooden cross bar. With the bar it is approximately 12 to 13 inches long. Contains thick, die cut balsa wood parts, four injection molded spoke wheels, preformed wooden parts and metal parts, cloth material for the roof, realistic and to-scale fabric red fringe material for the lower roof edge and other parts has needed. Includes full text instructions that are heavily illustrated. Never started. The hardware and small parts are still in the factory sealed bag. The larger parts were never factory sealed and have been inventoried complete. With all paperwork. Country Lane made a fairly extensive line of wagon and Dutch Buggy models; all kits were to the same unknown scale and there was even a scale plastic horse & harness (sold separately) to go with them.
Resin Model Kit, Box Condition: Exc
$16
Rare. Very high quality limited production model cast in high-definition resin. Never started. The parts are still in the internal factory sealed bags and includes instructions.
Wood Model Kit, Box Condition: Good
$60
True wooden scale flying model of the sleek Cessna 170. This model has more than a dozen contest wins to it's credit and is designed for Radio Control but can also be flown free-flight. Features injection-molded plastic cowl front, die-cut balsa and plywood parts, formed gear, die-cut celluloid windows, shaped tapered wing edges, a very large full color decal sheet and more. Nothing has been punched out and the model is exactly as it left the factory. Never started. The hardware is still in the original factory sealed bag; all other metal, wood and plastic parts have been inventoried complete. NOTE: missing full size plans. They are available on-line. If you cannot find them on-line, I will send the purchaser a link to them. If you already have a digital copy, you can print full size at FEDEX/Kinkos. The decals are 100% intact but have water stains at either corner. The other 90% of the decals are damage-free and 'very good.'
Plastic Model Kit, Box Condition: Good
$20
Well molded with recessed panel lines and includes injection molded canopy and decals. Never started and inventoried complete with all parts and includes decals and instructions. Work began on the HS-132 as a jet powered replacement for all the current dive and ground attack bombers which could not function without complete air superiority. Using the experience from the HS123 and 129, Henschel created a simple design where the pilot lay prone to combat "G" forces. The prototype was almost complete when the Russians captured it in 1945.
Plastic Model Kit, Box Condition: No Box
$19
NOTE: bagged kit; there is no box. The box is shown for reference only. Still in the factory sealed parts bag and includes decals and instructions. This model includes optional parts (different vertical & horizontal stabilizers) and decals to build any of the four prototypes. Well molded with all recess panel line detail, 'good' cockpit, pilot figure, injection molded canopy, full landing gear and more. When the Me-209 was dismissed as the 109s successor, design work began on the 309. It was intended to be a high speed, long range heavy attack fighter with an ejection seat and pressurized cockpit. Four were built, but the RLM never assigned any priority to the project. By that time, the jet-powered Me-262 showed more promise and work on the 309 was stopped.
Plastic Model Kit, Box Condition: Exc
$20
Limited edition from 1999 which includes a paint guide and decals for the box art aircraft. Very well detailed featuring complete cockpit, detailed twin-row engine and gear wells, drop tank and more. NOTE: this kit has minor, 'professional' quality subassembly as follows: bulkhead and seat to floor; two engine halves There is no other assembly. Inventoried 100% complete and includes decals and instructions.
Plastic Model Kit, Box Condition: Sealed Good++
$14
Still factory sealed and there is a small amount of mold inside the seal, so there was once moisture trapped between the cardboard and seal. Very finely molded kit with all fine recessed panel lines, very good cockpit, enclosed and detailed gear wells and more. Never started. It has been invento
Resin Model Kit, Box Condition: NM
$22
This is a very high quality multi-media model. Features beautiful high-definition resin parts, numerous PE metal details, clear film windows, all parts to build the missile and transporter in 'transport' or 'firing' position, detailed interior, optional position doors and much more.
Plastic Model Kit, Box Condition: Good-
$42
Early 1954 or '55 first issue with old 'Aurora Line' rectangular logo. This kit was issued shortly after moving to the West Hempstead facility on Long Island. The side logos are the old Brooklyn style but with the new address in the lower bar. Molded in the correct glossy light blue and clear with the early style Aurora rectangular stand, correct Tatem Company decals and the correct instructions. Never started. Inventoried 100% complete with all parts, decals and instructions. The box has wear as shown and also a narrow 1.5 x 1/4 inch factory tape litho pull on the upper long side.
Plastic Model Kit, Box Condition: No Box
$22
NOTE: bagged kit; there is no box. The box is shown for reference only. Hard-to-find Fighter Reconnaissance version of the venerable Meteor. This high quality, limited production model features all fine, recessed panel lines, recon nose with clear camera panels, very good cockpit, detailed main and nose gear wells, good intake & exhaust, choice of two canopies, drop tanks and more. Includes paint guide and decals for all RAF aircraft listed. Never started and inventoried complete with all parts and includes decals and instructions.
Plastic Model Kit, Box Condition: Sealed VG
$20
Still factory sealed but the seal has split in the center as shown. Very finely molded and detailed. Includes correct parts for radar and decals for two aircraft.
Plastic Model Kit, Box Condition: Good
$18
1966 hardbox issue with Tom Morgan boxart. Never started. Inventoried 100% complete with all parts, decals and instructions. Lindberg is a company with a fascinating history The original 'Lindberg Line' stretches back to the 1930s when Paul Lindberg drew plans for famous modeling magazines and marketed his balsa wood 'stick and tissue' by urging dealers to carry the '...Complete Lindberg Line'. After the war, Lindberg and Olsen had a strong hand in early United States injection molded kit development. Please see the article located on this website about early USA plastic kit manufacturers.
Plastic Model Kit, Box Condition: Exc
$32
2017 release from quality Monogram molds. Features detailed cockpits, optional position canopies, detailed wheel wells, GTD-21 Drone and ground handling cart. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.