Be the first to know when kits are listed!
Plastic Model Kit, Box Condition: VG
$95
Rare kit which includes the following factory-sealed aftermarket accessory: Montex #K48279 Super Mask Set which includes masks for painting the markings on the artwork aircraft as well and inside and out canopy masks. The actual kit is a large-scale Anson that is injection molded with numerous high-definition resin and photoetched details. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Plastic Model Kit, Box Condition: No Box
$26
NOTE: bagged kit; there is no box. The box is shown for reference only. This detailed, limited-run injection molded kit featuring optional parts for different aircraft, all fine recessed surface detail, many brass PE parts, resin details, very good cockpit, complete engine, clear windscreens and more. Includes rigging guide & paint guide and decals for all aircraft listed. Never started and inventoried complete with all parts and includes decals and instructions. The Koolhoven F.K.51 was the winning design in a 1935 Dutch government contest for a new trainer. The prototype was designed by Frederick Koolhoven and first flew on 25 May 1935. This two-seat, fixed undercarriage aircraft was an equal-span biplane designed to use a variety of engines from 249 to 500 hp. The Royal Netherlands Air Force (LVA) ordered 25 aircraft in 1936 and 1937 that were powered by a 270 hp Armstrong Siddeley Cheetah V radial engine. Another 29 aircraft were ordered with 350 hp Armstrong Siddeley Cheetah IX engine. The Dutch Naval Aviation Service ordered 29 aircraft powered by a 449 hp Pratt & Whitney radial while between 1936 and 1938 the Royal Dutch East Indies Army bought 38 aircraft with 420 hp Wright Whirlwind. The Spanish Republican government ordered 28 F.K.51s, 11 with 400 hp Armstrong Siddeley Jaguar IVa radials and 17 aircraft powered by 449 hp Wright R-975E Whirlwind radials; these were refereed to as F.K.51bis. Production totaled at least 142 aircraft and twenty-four fuselages of the F.K.51 were assembled at Aviolanda. While the majority of F.K.51s were employed as elementary trainers within the Netherlands in the Royal Dutch Flight Schools or in reconnaissance roles by the Royal Netherlands Air Force in the Dutch East Indies, twenty-eight were clandestinely sold to the Republican government during the Spanish Civil War, despite a Dutch embargo on the sale of arms to either side of the conflict. Some of those arriving in Spain were used as light bombers by the Republicans in the Cantabrian region of Spain.[2]Some LVA F.K.51s were briefly used for reconnaissance duties following the German invasion of the Netherlands in May 1940. Several F.K.51s being destroyed on the ground by attacking Luftwaffe aircraft. The Dutch Naval Aviation Service's F.K.51s were used to carry neutrality patrols from January 1940; however most were damaged or destroyed during an attack on De Kooy Airfield on 10 May.When the Japanese invaded in March of 1942, the Royal Dutch East Indies Army had 27 F.K.51s available for service. They saw the war coming and on December 5, 1941, the flying schools were shut down and the F.K.51s were formed into two reconnaissance squadrons based on Java.
Plastic Model Kit, Box Condition: Exc
$50
1961 hardbox issue with fantastic box art by jo Kotula. Includes decals for F7U-1 NATC aircraft. Molded in gloss medium gray and clear, with full landing gear and a triangle-based two-piece display stand. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. It even includes the original factory packing tissue paper.
Plastic Model Kit, Box Condition: VG++
$22
Well detailed kit with recessed panel lines, a large fret of photoetched details, very good cockpit and more. Never started. The resin and photoetched parts are still in the factory sealed bags. The other parts have been inventoried complete. Includes decals and instructions.
Plastic Model Kit, Box Condition: Sealed VG
$26
Still factory sealed. Dated 1987. These molds are from the famous motorized 1950s 'Action Kit'. It features retractable landing gear, movable control surfaces, opening canopy, elevating and rotating gun turret, opening bomb bay doors and more. It does not include the motorized or a few of the other original features.
Plastic Model Kit, Box Condition: Sealed NM
$22
Still factory sealed. Finely molded and detailed model features all fine recessed panel lines, good cockpit detail, open or closed canopy, separately molded wing flaps and ailerons, detailed gear wells and more.
Plastic Model Kit, Box Condition: Exc
$20
Limited edition from 2001. Features all fine recessed panel lines, very good cockpit, detailed gear bays, complete dual-row radial engine, drop tank and more. Never started and inventoried complete with all parts and includes decals and instructions.
Plastic Model Kit, Box Condition: Exc+
$22
1960s bagged kit with header and the Airfix third type logo. Includes decals for both air forces. Never started. Inventoried 100% complete with all parts, decals and instructions present
Plastic Model Kit, Box Condition: Sealed Exc
$32
Still factory sealed and from 1995 This is a highly detailed kit that is superbly molded with all very fine recessed panel lines. Features an excellent cockpit, detailed landing gear wells, drop tank, optional position canopy and more.
Plastic Model Kit, Box Condition: VG
$65
Hard-to-find 1969 three-color plastic soft box issue that includes the 'Everything Is Go' story booklet. The parts are molded in the correct gray, silver and yellow. Includes the 'Everything Is Go' booklet telling the story of the Friendship 7/Lt. Col. Glenn Flight. This kit was modified from the Atlas Ballistic Missile molds. It is the single greatest model kit for the Mercury Atlas program. Contains highly detailed Atlas/Mercury, launching pad, ramp, tractor transports, nitrogen tank and trailer & much more. Never started and inventoried complete with all parts and includes decals and instructions.
Plastic Model Kit, Box Condition: Fair
$65
Rare 1957 original 'S' issue with fantastic artwork. Very nicely detailed model includes drop tanks, strap on boosters, base, launcher and crew of two. Molded in the correct gloss red. Never started. Inventoried 100% complete with all parts, decals and instructions present. Please NOTE that the box displays 'Good' or slightly better but is graded 'Fair' because it has two closed holes near the back of the boosters and a long closed split on the box top running from the lower far left side to the end of the blue logo background on the lower right. There decals are in amazing 'excellent+' condition. The instructions are fine other than the small, closed holes in the instructions from whatever punched the holes in the box.
Plastic Model Kit, Box Condition: NM
$32
Very highly detailed with over 580 pieces, numerous brass PE details, turned metal gun barrel, MagicTrack individual track links and much more. Includes paint guide and decals for six different tanks. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Plastic Model Kit, Box Condition: Exc+
$64
1950s first issue in exceptional condition. This was a fine kit for that time which features very fine raised panel lines, recessed NACA inlets, vents and control surface outlines, retractable landing gear, opening canopy and missiles that actually launch from the central pod. Never started. Inventoried 100% complete with all parts/decals and instructions present. Please NOTE that the box displays 'mint' condition but is only rated 'excellent+' because there is residue from old tape (that has long since fallen off) at the center of both long side panels.
Plastic Model Kit, Box Condition: Exc
$32
1960s T3 logo release. The Bristol 192 first flew in 1958 and was the first helicopter in the world with true twin-engine safety, meaning that it could fly home and land safely at any gross weight. The kit features moving rotors, cockpit, clear windows and optional position doors. There is no assembly but NOTE: the cockpit parts are neatly painted interior green. There is no other painting. Inventoried 100% complete including all parts, decals and instructions.
Wood Model Kit, Box Condition: Sealed Exc
$34
Still factory sealed. This is a modern and well designed stick and tissue static scale model. This large scale kit features hand-selected laser cut balsa, many vacuformed details, color decals, full size plan, lightweight colored tissue and full step by step instructions.
Plastic Model Kit, Box Condition: VG
$95
Very finely molded and detailed and widely considered the finest injection molded 1/48 scale F-4 kit. Features correct British Phantom parts, all fine recessed panel lines, detailed cockpits, optional position canopies, separately molded ailerons, detailed gear wells, drop tanks, gun pods, air-to-air missiles and more. Includes a multi-view paint guide and decals for three different aircraft. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Plastic Model Kit, Box Condition: Sealed VG++
$42
Still factory sealed and very rare; even more so in this condition. 1950s issue with the original clear bag and paper header with the T2 style logo. The paper header is in 'Very Good++' condition.
Plastic Model Kit, Box Condition: Sealed VG
$35
Still factory 'round tape' sealed. The Bloodhound was an early Mach 2 surface to air missile that defended Great Britain. The range was about 60 miles. The Bloodhound was launched with four solid rocket boosters. Once these burned out and fell away, the main ramjet took over and the missile road a radar beam to the illuminated target. A detailed and well molded kit that features 64 pieces, one Bloodhound missile, the transport truck, working launcher assembly, transport trailer, crew of three and a dog.
Plastic Model Kit, Box Condition: Good
$44
Mid 1950s first issue with wonderful Ray Gaedke artwork showing Lindberg's Ryan NYP flying triumphantly over Paris. Well molded and detailed for that time in silver and clear plastic. Never started. Inventoried 100% complete with all parts present and includes decals and instructions.
Vacuform Model Kit, Box Condition: Sealed
$15
Still factory sealed. Very high quality vacuform kit with moldings equal to or better than many injection molded models. Features very fine detail, complete cockpit, clear canopy (undamaged but yellowed), injection molded plastic nose and main gear struts and wheels, decals and instructions/plans. Significant modeling skill is required to build vacuform kit. Not recommended for beginners.