Plastic Model Kit, Box Condition: Exc++
$69
Very early 1960s Tamiya model with high gloss box top and very collectible artwork. This is a superbly nicely molded kit for that time featuring clear fuselage half and cowling, well detailed interior, working ailerons, flaps and elevators, retractable landing gear, also three crew figures and more. The kit is intended to be motorized and includes all hardware and special stand that holds the batteries. As was the custom, Tamiya did not include the motor with the kit and it has to be purchased separately. Includes markings for four different aircraft. Never started. The parts are still in the internal factory sealed bags; all three bags still have the special Tamiya paper headers present and in factory-new condition. Includes decals and instructions, both of which are in 'excellent++' condition.
Plastic Model Kit, Box Condition: Sealed VG+
$124
Still factory sealed but the seal has shrunk and drawn the box top slightly concave. Large and hard-to-find model is finely molded and well detailed.
Plastic Model Kit, Box Condition: Good+
$110
Strombecker was very well known for producing the finest pre-carved hardwood aircraft, missile & ship kits, but they also made a very short journey into the field of plastic models. Strombecker cut a total of 5 molds for injected-molded aircraft kits; the 1956 Sea Dart being the first. All were discontinued in the mid 1960s. One such model is this big 1/48 scale Bell X-1B. There were two releases; this is the rarer of the two with the pilot bust molded into the fuselage. Kit features raised surface detail, full landing gear, clear canopy and more. Includes a display stand, full instructions with three photos of the actual aircraft, full color decals, small Strombecker kit catalog and an application for the Strombecker Model-Makers Club. Never started. The model has been inventoried 100% complete with all parts, decals and instructions present.
Plastic Model Kit, Box Condition: Good++
$385
Very rare classic Cold-War kit from the late 1950s. The Atomic Cannon was the Army's 20 mile range gun that could fire shells that contains small atomic bombs. The model is very highly detailed for that time and features transporters with movable wheels, towing yokes, fully detailed cab interiors, complete suspension and elevating and swiveling machine guns; the Atomic Cannon itself can be configured for firing or towing positions, the barrel elevates by actual operating gears, the carriage rotates 360 degrees on platform and it actually fires 2 "Atomic" shells. Includes crew of 7. Inside, the model is factory new. It has never been started. The internal factory cardboard divider is present and in 'excellent' condition. The parts that were factory sealed are still in the factory sealed bags; the parts that were never factory sealed have been inventoried complete. With decals and instructions. The decals are very loosely rolled and in 'very good' condition with the typical yellowing as the main flaws. The instructions are in 'excellent' condition with minimal yellowing and a slight bit of wear and creasing to the right side of the cover page. The box has like-new color and gloss with no rips, no price tags or tag marks, no tape or tape marks (other than the factory sealing tape), four solid corners, no repairs and no fading. However, it does have very light age foxing (which is very difficult to see, it is so light) and light edge & corner wear with two small spots of moderate edge wear on the left vertical edge. the four box sides are in the same condition as the top except NOTE: There is one factory tape litho pull on the lower long side. It measures 1.5" x .5".The amazing M65 280mm atomic cannon originally started life as a conventional artillery piece. Development first began in 1944 before the first atomic weapon had been tested. Far from being 'just another giant gun', the M65 was carefully designed to be a very mobile and versatile weapon. Liberal use of aluminum and other light-weight metals kept the weight of the gun and both transports to about 85 tons, which is not much more than the largest conventional gun of WWII. As a result, it is light enough to be carried by trucks and cross bridges without collapsing them. Size was also a major factor, as it can fit inside landing craft, turn street corners of an amazingly small radius and travel as fast at 35 mph. The two transporters are required to move the gun, with one in back and one in front. Power is supplied to each tractor by a 6 cylinder engine with 375 horsepower. Both transmissions are manually controlled. These 4x4 machines can push, pull or parallel one another - with the gun slung between them. The driver of the front tractor has control of the brakes and throttles of both units and can communicate to the rear driver by telephone. The gun can be traversed in a complete circle and has a range of up to 20 miles. A complete 280mm battery consisted of two guns, four 5-ton trucks towing ammunition trailers, another two trucks pulling a pair of generator trailers (each with a 30 KW generator to furnish power to the guns), a 5th truck carrying four shell carts and a 2 1/2 ton shop van. The total crew was about 100 men. Each gun could be set up to fire in less than 12 minutes and can fire a round every two minutes.
Metal Model Kit, Box Condition: Sealed
$38
Very rare when found with the original 'pull off' display card; however, the lower 1/3 of the card has been removed. It has two original, factory sealed Glow Heads still factory-attached. The clear plastic 'blister packs' are in amazing 'near mint' condition.
Other Materials, Box Condition: Sealed
$12
Still factory sealed. These decals are 'mint' condition and have always been stored in a climate controlled residence. Includes paint and markings guide. On this website are two articles that fully explain how to save or reproduce older decals; please read read these before using any older model kit or aftermarket decals. To save on or eliminate shipping for decals, please order them with model kits or order enough of them to make boxing worth while. USPS clearly states that any flexible envelope will be bent 90 degrees or more in 2 inches, I cannot send decals in a flexible envelope. And any decal reinforced with cardboard will be greater than 1/4" thick, which USPS says must go as a normal box. There is no choice; because I will not send decals to their probable destruction, shipping in a box is the only option.
Plastic Model Kit, Box Condition: Exc+
$20
Includes factory-sealed True Details 72025 Resin Wheel Set and Model Technologies MT0006 1/72 American WWII Seat Belt Buckles with Mounting Hardware in PE metal. The actual model is dated 1985 and features over 40 pieces, very fine raised panel lines, recessed control surface outlines, a very good cockpit, optional position canopy, complete two-row radial engine, centerline drop tank, six 5" wing-mounded HVAR rockets and more. Includes large, multi-view paint guides and decals for both aircraft listed. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Plastic Model Kit, Box Condition: VG+
$32
Beautiful and highly detailed model of the Fortress 'F' variant. Molded with all fine recessed panel lines and features excellent cockpit detail, rotating propellers & wheels, bomb bay detail, full bomb load, optional position bay doors and much more. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Other Materials, Box Condition: VG+
$12
These decals are 'mint' condition and have always been stored in a climate controlled residence. Includes paint and markings guide. On this website are two articles that fully explain how to save or reproduce older decals; please read read these before using any older model kit or aftermarket decals. Because the USPS clearly states that any flexible envelope will be bent 90 degrees or more within 2 inches due to automatic sorting machines, I cannot send decals in a flexible envelope. And any decal reinforced with cardboard will be equal to or greater than 1/4" thick, which USPS says must go at the normal 'box' rate. There is no choice; because I will not knowingly send decals to destruction, they will only ship in a box. So to eliminate or save significantly on shipping charges, please order them with model kits. Likewise, if you only purchase decals, try to order enough decals make the shipping cost (per sheet) worth while.
Plastic Model Kit, Box Condition: Sealed VG++
$36
Still factory sealed but the seal has two splits on the box top as shown in the photograph. This 1974 issue is from the original 'S' kit molds and features optional position landing gear, opened or closed cabin door, tip tanks, rotating propellers & wheels and more. Includes full color TWA markings.
Plastic Model Kit, Box Condition: VG+
$28
1980 big 1/48 scale release. Features very fine raised and some recessed panel lines, detailed cockpit, optional position canopy, working swing wings and glove vanes, Phoenix, Sparrow and Sidewinder missiles and more. The kit has never been started. Inventoried 100% complete including decals for VF-84 Jolly Rogers and instructions. The 1978 version is the same kit but the oval behind the aircraft is orange/yellow instead of the blue on this version.
Plastic Model Kit, Box Condition: Good-
$45
1960s Lodela issue issue. Features colorful American Airlines decals, fan-jet engines, optional position landing gear & passenger doors, working rudder, rotating wheels and more. Never started and inventoried complete with all parts and includes decals and instructions. The box displays better than 'good-' in the photos but is graded as such due to creases and closed tears.
Plastic Model Kit, Box Condition: Sealed Good
$545
This is a factory-sealed case of 12 Hobby-XV-3 model kits from the 1950s. Hobby-Time shipped them to the address on the box, and I purchased them from the man at that address. The case has never been opened and is still securely sealed top and bottom with the factory tape. The box is in 'excellent' condition. The actual model kits (12 inside the case!) are the one and only issue of this amazing aircraft. This is a very nice kit for that time with fine raised panel lines, interior detail and molded in gloss silver and clear.
Plastic Model Kit, Box Condition: Sealed VG+
$145
Still factory sealed and long out of production. The large Revell Saturn V is an excellent injection-molded kit of this legendary workhorse. The model actually comes apart and each sequence configuration of the Apollo Mission can be demonstrated with this model: Lift Off, 2nd stage, 3rd stage, separation, docking, lunar orbit, lunar module separation, lunar descent, lunar exploration, lunar lift-off, docking, starting for earth, separation, and reentry/recovery. Includes a clear panel so you can view the stowed lunar module.
Plastic Model Kit, Box Condition: Sealed NM
$220
Still factory sealed and in fantastic, investment-grade 'Near Mint' condition. Rare, large-scale original issue that was purchased new in December of 1973 in Akron, Ohio The MPC Pirates of the Caribbean series were unique and all of them became very collectible, classic kits. Each model is a full diorama and included extra bones, etc. so you could add your own touches. The 'Zap Action' feature was always interesting. In the case of the Mutineers, you press a button, and one pirate attempts to help lift his fellow pirate from a pit. Instead, he pulls his arm off clean off. For young children, this was an object lesson of the true power of a rubber band.
Other Materials, Box Condition: Sealed
$18
Still factory sealed. These decals are 'mint' condition and have always been stored in a climate controlled residence. Includes paint and markings guide. On this website are two articles that fully explain how to save or reproduce older decals; please read read these before using any older model kit or aftermarket decals. Because USPS handles envelopes roughly, I will only ship decals in a box; so to save on shipping, order decals with model kits so they ship together.
Plastic Model Kit, Box Condition: VG+
$44
Includes a factory sealed Eduard 48-105 P-47D Thunder Bolt PE Detail Set designed for this kit with two big frets, dozens of pieces, film instruments and full instructions. The actual model is the 1973 Monogram/Mattel 'Tall Box' release. This is a very finely molded and detailed model in the finest Monogram tradition. It features very fine raised panel lines, recessed control surface markings, an excellent cockpit, opening canopy, detailed gear wells, pilot figure, centerline drop tank, two wing mounted bombs and more. The kit has never been started. Inventoried 100% complete with all parts, decals and instructions present. The box is graded only 'very good+' because there is edge wear, especially on the left side.
Other Materials, Box Condition: Sealed
$16
Still factory sealed. These decals are 'mint' condition and have always been stored in a climate controlled residence. Includes paint and markings guide. On this website are two articles that fully explain how to save or reproduce older decals; please read read these before using any older model kit or aftermarket decals. Because the USPS clearly states that any flexible envelope will be bent 90 degrees or more within 2 inches due to automatic sorting machines, I cannot send decals in a flexible envelope. And any decal reinforced with cardboard will be equal to or greater than 1/4" thick, which USPS says must go at the normal 'box' rate. There is no choice; because I will not knowingly send decals to destruction, they will only ship in a box. So to eliminate or save significantly on shipping charges, please order them with model kits. Likewise, if you only purchase decals, try to order enough decals make the shipping cost (per sheet) worth while.
Vaccuform Model Kit, Box Condition: Sealed NM+
$48
Still factory sealed and the 2024 issue from original ERTL molds. Well detailed kit with over 100 parts and a very large and colorful Coca Cola Company Sprite decal sheet with several variations. Features operating 'Select-A-Point' sliding suspension, two position support assembly with optional wheels or sand shoes, detailed suspension, opening doors and more. Molded in white, black, chrome plate and red-tinted clear plastic and with rubber tires.
Plastic Model Kit, Box Condition: Exc+
$58
1971 issue of the very popular model with great Tokyo Raid box art. The model can be built as a standard B-25B or includes conversion parts for a Doolittle Raider. Features movable and retractable lower turret (or cover for raider), three crew, detailed engines with removable cowling, rotating props and wheels and optional position bomb bay doors and bomb load. Never started. Inventoried 100% complete with all parts, decals and instructions present.
