Wood and Plastic Model Kit, Box Condition: Good
$369
Rare early Monogram kit from the early 1950s. Fantastically well detailed and presented multi-media kit with 34 injection molded clear, red, black and gray acetate and 57 die cut or shaped balsa parts including the famous Monofoil pre-formed wing. This example has never been started and is inventoried 100% complete with all parts, glue, dope, decals, sand paper, plans and instruction book. It still has all of the correct internal display cardboard as shown. NOTE: the decals are only in 'good' condition and have some damage as shown. Please note that this kit must be shipped insured. This is the first large-scale non-flying scale Speedee-Bilt model, the B-25 Mitchell. Before there were plastic models, there were wooden aircraft kits. These usually came in two types - solid and stick and tissue. The solid models were static and usually contained a few blocks of balsa and sometimes a detail part or two. These "Make Wood Look Like Plane" models required a very high level of skill in carving and finishing. The stick and tissue variety were slightly easier to build and provided the ultimate thrill - they could fly when complete with rubber power (and later with free-flight gas and eventually RC). They still required a great deal of skill, so manufacturers sought ways to make model building more accessible to everyone. One idea was pre-carving and/or prefabrication. This raised prices, naturally. Many manufacturers launched lines of 'easy' to build flying models but only Monogram succeeded in making an entire line at an affordable price that would actual fly. Monogram, however, wanted to make true scale models that could still be assembled easily. So they created the four large and highly detailed non-flying scale Speedee-Bilt bombers - the B-25, B-26, B-24 and B-17. The kits were a tremendous success and sold well in the early to mid 1950s.
Plastic Model Kit, Box Condition: Sealed NM
$325
Still factory sealed. This special release features realistic engine sound of the Sakae Type 21 linked to the speed of an electric motor driving the propeller and also with working lights. The sound realistically simulates 6 phases of flight - start up, idling, warming up, test running, sortie and returning to base with shutdown. Incluedes all special parts required except batteries. The actual Zero model is the 2001 issue of one of the finest kits available of any subject. Very highly detailed and finely molded. Includes canopy masks, grooved rubber tires, metal hinges and photoetched details. There are decals for three different aircraft. Please note, this is a very large kit so shipping will not be inexpensive.
Plastic Model Kit, Box Condition: VG
$110
1970s issue of this large 1/8 scale model that is well detailed with over 200 pieces. The complete engine includes crankcase, cylinder heads, pushrods, valve housings, propeller hub, accessory section, carburetor and fuel system, vinyl wires for the distributor blocks and dual ignition system and more. A name plate label is included with a Pratt & Whitney logo decal. A scale engine mount is furnished with the kit. The kit has never been started. All parts are still in the internal factory sealed bags and includes instructions. This engine was P&Ws first aircraft engine and the original purchaser was the US Navy in 1926. The Wasp went on to find world-wide fame in over 50 aircraft. The Boeing 247, P-12, F4B-4, Curtiss F6C-4 Hawk, F8C-5 Helldiver, Douglas Dolphin, Ford Trimotor (some versions), Gee Bee racers, Lockheed Orion, Sirius, Vega, Sikorsky S-38 are just a few. Some were manufactured under license by other companies including BMW in Germany.
Other Materials, Box Condition: VG
$14
This decal sheet is in 'mint' condition and has always been stored in a climate controlled residence. NOTE: missing the markings & paint guide sheet. On this website are two articles that fully explain how to save or reproduce older decals; please read read these before using any older model kit or aftermarket decals. Because USPS handles envelopes roughly, I will only ship decals in a box; so to save on shipping, order decals with model kits so they ship together.
Other Materials, Box Condition: Sealed
$44
Still factory sealed; rare with all three parts present. These decals are 'mint' condition and have always been stored in a climate controlled residence. Includes the markings & paint guide sheet. On this website are two articles that fully explain how to save or reproduce older decals; please read read these before using any older model kit or aftermarket decals. Because USPS handles envelopes roughly, I will only ship decals in a box; so to save on shipping, order decals with model kits so they ship together.
Plastic Model Kit, Box Condition: Sealed Exc+
$36
Still factory sealed. Very highly detailed kit from new molds with 141 pieces, numerous PE details, express mask set, excellent cockpit, optional position canopy, detailed gear bays and much more. Includes multi-view paint guide and decals for four different USN aircraft.
Plastic Model Kit, Box Condition: VG
$135
Rare original issue from 1955. This kit has some of my favorite Revell 'S' artwork and is incredibly well detailed for that time. Features a one-piece hull and one-piece main deck, oil hatches, piping, chocks, windlass & valve detail, winches, pipe line davits, fore and midship catwalks, detailed midship and rear superstructure including skylight showing some engine detail, stairways, ventilators, masts & booms, davits & ships boats, anchors, jackstaff & flagstaff, rudder and more. Inside, the model has never been started. The kit has been inventoried complete with all parts and includes decals, flag sheet and instructions. The box had two closed split corners. NOTE: pieces #21 and #22 (rear side railings) are a different color plastic. They are from a later issue of this same model.
Plastic Model Kit, Box Condition: Exc+++
$195
Includes factory-sealed AMS Resin #AMS32120 1/32 Mosquito 100 Gallon Slipper Tanks (2). The actual kit is not only the finest Mossie model ever made but one of the finest model kits period. Includes the Export Version only clear engine cowling parts and the Reference Manual. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Plastic Model Kit, Box Condition: Sealed NM
$24
Includes the following aftermarket detail sets which are all factory-sealed: Extra Tech EX72-026 Spitfire Mk.I to V PE Details and Film instruments, Extra Tech EX72039 RAF WWII Seatbelts and Buckles, Squadron 9123 Crystal Clear Canopies (includes two) For 1/72 Spitfire Mk.I/II and True Details 72018 Spitfire Mk.I/IX Wheel Set. The actual model kit is still factory sealed.
Other Materials, Box Condition: Sealed
$10
Still factory sealed. These decals are 'mint' condition and have always been stored in a climate controlled residence. Includes paint and markings guide. On this website are two articles that fully explain how to save or reproduce older decals; please read read these before using any older model kit or aftermarket decals. Because USPS handles envelopes roughly, I will only ship decals in a box; so to save on shipping, order decals with model kits so they ship together.
Other Materials, Box Condition: Sealed
$25
This very large 1/32 decal sheet is in 'mint' condition and have always been stored in a climate controlled residence; however. Includes paint and markings guide. On this website are two articles that fully explain how to save or reproduce older decals; please read read these before using any older model kit or aftermarket decals. Because the USPS clearly states that any flexible envelope will be bent 90 degrees or more within 2 inches due to automatic sorting machines, I cannot send decals in a flexible envelope. And any decal reinforced with cardboard will be equal to or greater than 1/4" thick, which USPS says must go at the normal 'box' rate. There is no choice; because I will not knowingly send decals to destruction, they will only ship in a box. So to eliminate or save significantly on shipping charges, please order them with model kits. Likewise, if you only purchase decals, try to order enough decals make the shipping cost (per sheet) worth while.
Wood and Plastic Model Kit, Box Condition: Sealed Good
$225
Still factory sealed and rare. This is NOS (New Old Stock) from a hobby shop that closed down in about 1994; you would be the first owner of this model. The kit is of traditional wood construction and designed for R/C operation off water or land. Shipping is via UPS Ground or you can eliminate the shipping charges completely and pick it up from me at my local Panera Bread Restaurant. NOTE: this kit comes in a very sturdy and thick cardboard box. It will ship in that box wrapped in thick brown paper. If you wish for it to be placed inside another box, let me know in the 'comments' section of checkout but be aware that additional shipping charges will apply and an invoice will emailed to you for that.
Plastic Model Kit, Box Condition: Sealed Exc
$225
Very high detailed, large scale X-15. Features 81 injection molded parts, 70 beautiful resin pieces, a fret of photoetch metal details, film for the instruments, all fine recessed surface detail, very good cockpit, detailed gear well and more.
Plastic Model Kit, Box Condition: Sealed Exc
$42
Still factory sealed. This model was purchased new in 1961 and is straight from the collection of the original owner. The Type 2 paper header is in 'Excellent' condition. Molded in the correct silver plastic with a clear canopy and correct early. two-piece clear Airfix 'teardrop-base' stand. Airfix used the 'T2' logo from the late 1950s to the early 1960s.
Plastic Model Kit, Box Condition: Good-
$14
Nicely detailed kit with 65 parts. Features optional parts for either 316 or 319 variants, very good full cockpit, detailed engine, rotor heads and more Molded in blue and clear. Never started and inventoried complete with all parts and includes instructions. NOTE: missing decals.
Vacuform Model Kit, Box Condition: Sealed
$18
Still factory sealed; this issue includes very fine cast resin tires & rims and cast metal main and nose landing gear struts. This aircraft was the last Curtiss-Wright designed airplane and was intended to replace the P-61 Black Widow. It was a clean and capable design yet underpowered; plans were to use the power powerful J47s in the production aircraft. The Air Force placed a production order; however, that was canceled and it lost out to the F-89 Scorpion. A certain degree of modeling skill is required to build vacuform models. They are not recommended for beginners.
Plastic Model Kit, Box Condition: Good
$65
First issue hardbox is dated 1956 and a fine kit of this Navy high horsepower trainer. Features a good tandem cockpit, opening rear canopy, retractable landing gear, rotating propeller & wheels, instructor, student pilot and mechanic figures and more. Molded in the correct yellow and clear. Never started. Inventoried 100% complete with all parts, decals and instructions present.
Vaccuform Model Kit, Box Condition: Exc
$42
Includes the following factory-sealed aftermarket accessories: AeroMaster 48-297 Decal Set "Spitfires: End of the Line", True Details 49006 Spitfire Mk.22/24 resin Cockpit Set (this is a super-detailed complete cockpit and seat, ex KMC 48-6020, Eduard 48-247 Seatbelts RAF WWII (PE), Waldron Model Products 1/48 Supermarine Spitfire Cockpit Placards, Squadron 9576 Cyrstal Clear Canopy Spitfire F22/24 (two canopies, mint condition, no yellowing), WaterMark Decals #48102 Spitfire Markings RAF/RCAF Roundels And Fin Flashes Europe 1942-1945 and AeroMaster 148-009 Spitfire Stencils Decal Set. The actual model is from new molds and features 90 pieces, optional parts to build a correct F22 or F24, very fine recessed surface detail, very good cockpit, optional position canopy, pilot figure, enclosed and detailed gear wells, separately molded rudder and split trailing edge wing flaps, rockets and more. Includes decals for all three aircraft listed. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions. Please NOTE that the decal backing paper has light age spots on it. The actual transfers are free of spotting.
Plastic Model Kit, Box Condition: Exc+
$129
Rare first issue dated 1955. It has the correct P11-98 kit number and early logo. The model has beautiful mold quality and detail for that time and features rotating propellers and wheels, optional position main doors with boarding ladder, four paratroopers and a crew of two pilots. Molded in the correct high-gloss dark olive drab and clear plastic. Never started. It has been inventoried complete with all parts and includes decals and instructions. The box would grade higher than 'excellent+' but there is sun fading on the lower short side and clear tape residue at the center of both long sides.
Plastic Model Kit, Box Condition: Exc++
$175
Rare First issue dated 1958 with classic box art. This model has movable vertical fin and dive brakes, removable rocket engine, hinged landing skids and removable canopy. Molded in gloss black, clear and with the famous Revell Swivel 'Globe' stand. Never started. Inventoried 100% complete with all parts, decals and instructions. Decals and instructions are in 'excellent++' condition with light yellowing as the only flaw. NOTE: the box displays much better than the 'Excellent++' rating. It is rated that because the left side short panel is only 'good++' with scuffing and edge wear.
