Plastic Model Kit, Box Condition: Sealed Exc+++
$58
Still factory sealed. Very highly detailed and one of the finest 1/48 F/A-18 kits available. Features all very fine recessed panel lines, detailed cockpit and gear wells, pilot figure, detailed air inlets, optional position canopy and air brake, separately molded leading edge slats, flaps, ailerons & rudders, pilot boarding ladder and more.
Plastic Model Kit, Box Condition: Sealed Exc
$16
Still factory sealed. Very cleanly molded with fine recessed panel lines and includes parts and decals both both variants (III/SKG210 Eastern Front 1941 or JG26 Galland 1940).
Plastic Model Kit, Box Condition: Good+
$38
1950s issue with early classic box art by Ray Gaedke. This is a very fine model for that time and features a detailed engine, removable cowling, very good dual cockpits, two pilots, ground crewman, aircraft tail dolly, rigging drawing and more. Molded in a beautiful gloss yellow and clear. Never started and inventoried complete with all parts and includes decals and instructions. There is very light age foxing on the box top.
Plastic Model Kit, Box Condition: Exc+
$24
Rare Great Britain issue that is from the late 1960s or early 1970s. This kit is very well molded and features very fine surface detail, a clear canopy, full landing gear and a clear display stand with a name plate. Never started and inventoried complete with all parts and includes decals and instructions. The instructions and a multi-view paint guide are on the back of the box.
Plastic Model Kit, Box Condition: Good+
$65
Very highly detailed inside and out. This model features numerous pieces, full cockpit, complete cargo interior with bench seating, optional position rear cargo doors, detailed rotor head, realistic intake and exhaust and much more. NOTE: this model has very minor and 'excellent' quality sub-assembly as follows: 2 seats and 2 small bulkheads to the cockpit floor. There is no other assembly. Inventoried 100% complete with all parts, decals and instructions present.
Plastic Model Kit, Box Condition: Exc
$27
Very well detailed kit from new molds. Never started and inventoried complete with all parts and includes decals and instructions.
Plastic Model Kit, Box Condition: Sealed Exc+
$16
Still factory sealed. Features injection molded parts with very fine recessed panel lines, cast resin wheels & other parts, cast metal main gear struts, very good cockpit and more. Includes paint guide and decals for four different aircraft.
Plastic Model Kit, Box Condition: VG
$12
The I-400 was a huge 400 foot long submarine that carried three seaplanes. Originally it was intended to launch aircraft against the Panama Canal, but this attack never materialized. Three of the seventeen subs originally planned for this class were completed. The kit has not been started. The parts are still in factory sealed bags and includes instructions.
Plastic Model Kit, Box Condition: Exc
$18
1970s Heller issue with 'Black Box' design that has black background on the box top and all 4 sides. Includes French Algerian Air Force markings. Does not have Gabon markings. This kit has not been started. The parts have been inventoried 100% complete and includes decals and instructions.
Plastic Model Kit, Box Condition: Exc++
$95
Large-scale, highly detailed model designed for scale four-propeller drive in water; ideal for remote control (R/C) conversion. This motorized version is long out of production. The kit is very highly detailed and includes the gear box, all hardware, drive propellers, switch and more. The kit has never been started. The parts are still in the internal factory sealed bags and includes flags and instructions. Please note that Tamiya did not include a motor in this issue.
Plastic Model Kit, Box Condition: Good
$24
Limited run. Nicely done with both injection molded missile models and a cast metal display stand in the shape of Iraq with "SCUD VS. PATRIOT" in raised letters. The stand arm is also metal as well. Never started. It has been inventoried complete with all parts and includes instructions. "On Target Models" was a cooperative effort between Meikraft Models and 12 Squared. A second model, the X-31 was announced but I have yet to see one; perhaps it will surface one day. Meikraft and 12 Squared were among the early American companies to produce short run injection molded kits.
Plastic Model Kit, Box Condition: VG+
$20
First issue dated 1973. Finely detailed for that time and includes optional parts to build either aircraft, good cockpit, full underwing stores and more. With decals for both aircraft listed. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.
Plastic Model Kit, Box Condition: Good
$68
Very large and well detailed 1/12 scale kit measures over two feet tall when assembled. Includes Mercury capsule, escape tower, retropack, full interior and scale astronaut. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.
Plastic Model Kit, Box Condition: VG
$24
Very highly detailed kit will all fine recessed panel lines. Features decals for 5 famous air groups, detailed cockpit, engine and gear wells and optional drop tank. This kit has never been started. Inventoried 100% complete with all parts, decals and instructions present.
Plastic Model Kit, Box Condition: VG++
$54
Rare model from 1991 that is very highly detailed from newer tooling and features 88 pieces, a very large and extensive Thunderbirds decals sheet in still in "near mint+" condition, all very fine recessed panel lines, very well detailed cockpit and ejection seats, optional position canopies, detailed gear wells, centerline and wing drop tanks and more. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Plastic Model Kit, Box Condition: VG++
$18
NOTE: bagged kit; there is no box. The box is shown for reference only. Nicely detailed kit of this popular light acrobatic aircraft. The kit has never been started. The parts are still in the factory sealed bag and includes a large and detailed decal sheet with full 'feather' designs and instructions.
Plastic Model Kit, Box Condition: Exc
$25
The -6 was the end of the production of the sturdy SBD. This kit is from 1996 and features 52 pieces, all fine recessed panel lines, highly detailed cockpit and crew station, correct -6 parts, bomb load, three piece canopy and decals/paint guide for the two aircraft listed. Never started and inventoried complete with all parts and includes decals and instructions.
Plastic Model Kit, Box Condition: VG
$22
Features fine raised panel and rivet detail, nicely detailed cockpit with pilot with positionable arms, two piece canopy, gear well detail and a choice of drop tanks, 227kg bombs, 454kg bombs and rockets. Includes decals for 7 aircraft as listed in the title. The kit has never been started. Inventoried 100% complete including decals and instructions. Decals are flat and 100% intact but NOTE: has typical age micro-cracking.
Plastic Model Kit, Box Condition: VG
$18
Very nicely molded kit from the Matchbox 1/76 scale series. Includes decals for Royal Hussars, 2nd Troop Leader "A" Sq. British Army of the Rhine West Germany 1986 or 2nd Royal Tank Regiment Squadron Leader "C" Squadron, British Army of the Rhine, West Germany 1987. Never started and inventoried complete with all parts and includes decals and instructions.
Wood Model Kit, Box Condition: Good
$44
Early 1970s large-scale issue for rubber or gas free flight; easily converted to RC using today's tiny and light servos and receivers. This kit features traditional wood/tissue construction, quality printwood, factory cut stringers and spars, blocks and wood stock are required, fully shaped & finished main, tail wheel & thrust button, covering tissue, a very nice vacuformed clear canopy (in near mint condition and still clear & not yellowed), plastic flying propeller and scale balsa propeller, rubber motor and more. Includes a large insignia sheet and detailed full size plans that include text building instructions and additional construction drawings. The model no assembly but NOTE: all printwood parts have been cut out to 'excellent++' to 'professional' quality. If you are not aware of it already, this is a huge help in building the kit. Inventoried and NOTE: missing one very small gusset #F4. Otherwise complete with all other parts and instructions. Comet was a famous manufacturer of stick and tissue flying and static models. In the 1930s Great Depression, they lead the low-priced kit revolution with the "Dime Scale" kits and famous advertisements in Model Airplane News magazine and others. Comet reached it's peak in the 1930s when they acquired the services of Carl Goldberg. Goldberg was a highly accomplished modeler with articles in Model Airplane News and famous designs that won him several National level competitions in the 1930s and beyond. (Carl Goldberg went on to found his own company and produced well designed and popular free-flight and RC aircraft). Comet survived the post World War economic slump and continued kit production until they were bought out by long-time competitor Guillow's in 1998.
Keep link list open
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248