Plastic Model Kit, Box Condition: Sealed NM
$34
Still factory sealed and an excellent model. Finely molded with all recessed panel lines, two frets of PE details & some of the factory painted, canopy masks, highly detailed cockpit and engine, full wheel wells, separately molded ailerons, elevators, rudder & wing flaps, optional position canopy, and more. Includes a full color paint guide and decals for 5 different Night Hellcats.
Plastic Model Kit, Box Condition: Exc+++
$59
Includes the following factory-sealed upgrades: Eduard 48-250 Lightning F2/F6 PE Details With Film Instruments and the superb AeroMaster #48-369 Lightnings Part I Early Days, which includes two big and colorful decal sheets and extensive, full color paint & markings guide for four different aircraft. The actual kit is highly detailed and well molded. Features all fine recessed panel lines, optional parts for F-2A and F-6 variants, full cockpit, pilot figure, realistic intake and exhaust design, optional position canopy and speed brakes, detailed gear wells, Redtop and Firestreak missiles, drop tanks and more. Has decals and paint guide for the many aircraft listed. The kit has never been started. Internal factory sealed bag including decals and instructions.
Plastic Model Kit, Box Condition: VG++++
$145
Very rare kit for the advanced collector. The Seabee was produced as a high performance sport amphibian. This is a very hard-to-fine original O-lin kit in the small box and advertisement for O-lin cement on the top. Produced in 1949 or just before. O-Lin (Olin) was founded by Paul Lindberg and a Mr. Olsen - hence the company name. Although a producer of flying models in the 1930s, O-lin produced some of the earliest American injection molded kits in the late 1940s. In 1950 the partnership may have ended, because all branding was changed to Lindberg and Paul Lindberg. Inside, the kit is as new. It is molded in high gloss light gray and has the correct decals and instructions. The kit has never been started and is inventoried complete with all parts, instructions and decals.
Plastic Model Kit, Box Condition: Good+
$475
Rare 1956 Revell Gift set containing all three ships and even the unopened tube of colorful Revell "S" cement. This was the first and only issue of this specific gift set and features spectacular special box artwork. The tugboat is 1/108 scale and the tanker and cargo ship are both 1/400. Inside, the kit is 100% correct. The special color cardboard over lay is factory fresh. The tug and C-3 lower hulls are factory painted red (the T-2 was molded in red so it was not painted). Decals are included. The instruction sheets are excellent with the typical yellowing as the only flaw. The three kits have not been started. The tug and freighter still have the small parts in the factory sealed clear bags; the parts that were never sealed have been inventoried complete. The tanker has been inventoried 100% complete. All three kits include decals and instructions. The box has brilliant color and gloss, four solid corners and no repairs. There is no tape, tape marks, price tags or price tag marks. However, there is moderate and light general wear and 'dings' on the two lower corners as shown. Shipping insurance is required with this kit.
Wood and Metal Model Kit, Box Condition: NM
$159
Very large scale and highly detailed first quality kit of this beautiful, historical and highly successful boat. The model measures 32.5 inches long when assembled. Features a solid basswood, factory-carved hull, precision laser cut hardwood and plywood parts, true-to-scale Britannia metal, brass & copper, hardwood blocks & deadeyes, 5 diameters of rigging material, basswood launching ways, walnut display stand, detailed plans, easy to follow instructions and more. Never started. The parts are still in the internal factory sealed bags and boxes and includes plans & instructions.
Other Materials, Box Condition: NM
$12
Includes markings for Israeli Air Force, Royal Navy (2), US Navy HS-2 USS Hornet and HS-3 as well as US Marines. These decals are 'excellent+' with some yellowing as shown; place them in a sunny window for several days to remove the yellow. They have always been stored in a climate controlled residence. Includes a full color paint and markings guide for multiple aircraft. On this website are two articles that fully explain how to save or reproduce older decals; please read read these before using any older model kit or aftermarket decals. Because USPS handles envelopes roughly, I will only ship decals in a box; so to save on shipping, order decals with model kits so they ship together.
Other Materials, Box Condition: Sealed
$15
Still factory sealed and includes markings for all four C-47s illustrated. These decals are 'mint' condition and have always been stored in a climate controlled residence. Includes the markings & paint guide sheet. On this website are two articles that fully explain how to save or reproduce older decals; please read read these before using any older model kit or aftermarket decals. Because USPS handles envelopes roughly, I will only ship decals in a box; so to save on shipping, order decals with model kits so they ship together.
Other Materials, Box Condition: Sealed
$10
Still factory sealed. These decals are in 'mint' condition and have always been stored in a climate controlled residence. Includes the markings & paint guide sheet. On this website are two articles that fully explain how to save or reproduce older decals; please read read these before using any older model kit or aftermarket decals. Because USPS handles envelopes roughly, I will only ship decals in a box; so to save on shipping, order decals with model kits so they ship together.
Plastic Model Kit, Box Condition: Sealed NM
$38
Includes factory-sealed Airwaves AC4817 1/38 F/A-18 A/B Brass PE Detail Set and Model Technologies MT0049 1/48 F-18 Hornet Canopy Detail Set. The actual kit is still factory sealed. This 1990 issue includes photo-etched metal details. Finely molded and detailed model features complete cockpit and wheel well detail, pilot, moving stabilator, optional position canopy and a loadout of AIM-9 Sidewinders, drop tank, laser guided bombs and designator pod.
Other Materials, Box Condition: Sealed NM
$14
Very early Microscale decals by the Martin Krasel Studios in Culver City, California. These decals are 'mint' condition and have always been stored in a climate controlled residence. Microscale did not furnish a markings & paint guide with this sheet. On this website are two articles that fully explain how to save or reproduce older decals; please read read these before using any older model kit or aftermarket decals. Because USPS handles envelopes roughly, I will only ship decals in a box; so to save on shipping, order decals with model kits so they ship together.
Other Materials, Box Condition: Sealed
$12
Still factory sealed. These decals are 'mint' condition and have always been stored in a climate controlled residence. Includes paint and markings guide. On this website are two articles that fully explain how to save or reproduce older decals; please read read these before using any older model kit or aftermarket decals. To save on or eliminate shipping for decals, please order them with model kits or order enough of them to make boxing worth while. USPS clearly states that any flexible envelope will be bent 90 degrees or more within 2 inches, so I cannot send decals in a flexible envelope. A decal reinforced with cardboard will be greater than 1/4" thick, which USPS says must go as a normal box. There is no choice; because I will not send decals to their probable destruction, shipping in a box is the only option.
Plastic Model Kit, Box Condition: Sealed Exc
$34
Still factory sealed and rare in this condition. This 'Orange' Series issue includes a full color, multi-view paint guide and decals for No.12 Sq RAF Honington, 1970 and No. 24 Sq SAAF Waterkfloof, 1970. Features fine raised panel lines, recessed control surface outlines, opening unique, rotating bomb bay, folding wings, working arresting hook, four anti-ship missiles on wing pylons, optional position landing gear and more. The Buccaneer was the world's first purpose designed low level 'below the radar' bomber. Low level strike aircraft have a shorter airframe life limit due to the stresses of low level flying, so the Buccaneer was designed to be very strong and even had many sub-assemblies milled from solid metal.
Plastic Model Kit, Box Condition: NM
$145
1957 original 'S' issue with the fantastic box art that has made these kits so famous and collectible. The hardbox is in amazing, investment-grade 'Near Mint' condition which is rare for this kit because the colors on the box top always show even the slightest wear. Nicely molded kit features optional position cargo door, refueling boom, optional position landing gear and a moving rudder. Molded in the correct gloss silver and with the clear Revell 'Globe' Swivel Display Stand. Never started. 100% inventoried complete with all parts, decals and instructions present.
Plastic Model Kit, Box Condition: NM+
$189
Very rare and especially in impressive, investment-grade 'Near Mint+' box condition. First and only issue dated 1958 and from this amazing box art you can clearly see why these kits are so collectible. This example is in investment-grade 'near mint plus' condition with factory-new color and gloss, four solid corners, no creases, no stains, no tape (other than the factory tape), no writing, no tags and no tag marks. Flaws include very light and isolated wear and a tiny tape tear on the top long side from the factory sealing tape (measures about 3/8 x 1/4 inch). This kit uses modified 1956 molds from H232-89, the original S Skyhawk issue. Revell added two Bullpup Missiles (improperly labeled as 'Air-To-Air Missiles' on the box top), two missile trailers with towbars, four figures, three figure bases, weapons pylons, separate flap hinge covers and of course a completely new decal sheet. Molded in the correct gloss gray and clear.
Plastic Model Kit, Box Condition: VG+++
$125
Dated 1967 with stunning box artwork. Features Tarzan figure with knife sheath, large display base, dead lion, Tarzan's knife and more. There is a comprehensive history of Tarzan on the back of the instructions with a photo of the built and painted kit. Never started and inventoried complete with all parts and includes instructions in 'very good+' condition; age yellowing on one panel is the only significant flaw.
Plastic Model Kit, Box Condition: Sealed Exc-
$69
Includes the following factory-sealed aftermarket detail sets: Waldron Model Products 1/24 Supermarine Spitfire Cockpit Placards and Metal Parts (PE) and 1/24 Seat Belt Buckles (Steel PE). The actual kit is still factory sealed and one of at least three MPC releases of this very large, classic 1/24 scale kit. Over 18 inches long when assembled and features detailed Rolls-Royce Merlin engine with removable panels for display, sliding canopy to show complete cockpit, two detailed gun bays with 8 Browning .30 caliber machine guns and removable panels, retractable landing gear, real rubber wheels and more.
Plastic Model Kit, Box Condition: Exc
$44
Includes the following factory-sealed accessories: Reheat Models RH082 P-51B/D/K Detail Set designed for this kit, TWO sets (two decal sheets) of AeroMaster #148-008 P-51D/B Basic Stencils Set and Squadron Crystal Clear Canopy #9501 P-51D Dallas Canopy Set (two included). The actual kit is the 1977 release and a very high quality model. Features complete and well detailed cockpit, opening canopy, pilot figure, removable wing panels showing machine guns and ammo belts, detailed gear wells, optional lower cowl and lower engine detail, choice of 2 types of exhaust, two drop tanks, rotating wheels & propeller and more. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Other Materials, Box Condition: Sealed
$14
Still factory sealed. These decals are 'mint' condition and have always been stored in a climate controlled residence. Includes paint and markings guide. On this website are two articles that fully explain how to save or reproduce older decals; please read read these before using any older model kit or aftermarket decals. To save on or eliminate shipping for decals, please order them with model kits or order enough of them to make boxing worth while. USPS clearly states that any flexible envelope will be bent 90 degrees or more within 2 inches, so I cannot send decals in a flexible envelope. A decal reinforced with cardboard will be greater than 1/4" thick, which USPS says must go as a normal box. There is no choice; because I will not send decals to their probable destruction, shipping in a box is the only option.
Plastic Model Kit, Box Condition: Sealed Exc+++
$65
Still factory sealed and from a one-ower collection. Dated 1967 and an excellent, completely metal plated model of the early 'A' variant Starfighter. Features realistic metal-plated panels with variations, pilot and basic cockpit, wing tip tanks, detailed landing gear, optional position dive/speed brakes, crew boarding ladder and more. Includes a large decal sheet with markings for all three nationalities.
Plastic Model Kit, Box Condition: VG+++
$245
1958 first issue hardbox featuring some of my favorite 'S' box artwork. Correct, original issue molded in three colors; not the recent reissue. The box is in 'very good+++' condition with great color and gloss. There are no price tags, no tag marks, no litho tear or missing litho, no fading, four solid original corners and no stains. Flaws include even light general wear as shown, a very short and mild crease at the upper left and residue from thin, clear tape on all four sides. Loaded with working features typical of kits at the time. The entire gantry tower folds back and moves on railroad base, the elevator moves to the four different work platforms and the Explorer Satellite can be removed from the Jupiter rocket. Includes crew of 7. Inside, the kit has never been started. The parts are molded in the correct red, medium gray and white. Inventoried 100% complete with all parts and completely flat 'very good++' condition decals and 'very good' instructions with typical yellowing and some edge wear, the heaviest at the bottom.
