Be the first to know when kits are listed!
Metal Model Kit, Box Condition: Sealed
$19
NOS - New Old Stock and still factory sealed.
Plastic Model Kit, Box Condition: Sealed VG
$18
Still factory sealed. This 1980s issue is from the original molds dating from the early to mid 1960s. The 63.II was a further development of the successful Potez 631 and was used in the scouting and observation role. Four squadrons were equipped with this type. They saw heavy action and 63.11 losses were the greatest of all Armee de l'Air combat aircraft during the Invasion of France.
Plastic Model Kit, Box Condition: VG to Exc
$40
SALE! Includes the following sets for one price: Tamiya 1/10 scale "Sand Blaster 915" Semi-Pneumatic Rubber Tire Set With Two Wheels (Rear), complete and never used, factory sealed Bolink BL3053 1/10 scale Blue Dot Rubber On Wide Front Wheels, factory sealed Bolink 3321 R/C-10 Rears With Blue Dot Rubber and Kyosho 1940-9800 Car Aids Screw & Nut Set For Radio Controlled Cars in never used and internally sealed condition. The screws and nuts come in a handy compartmentalized plastic case with a clear top.
Other Materials, Box Condition: Sealed NM
$30
Still factory 'round tape' sealed. This is a set of superb state-of-the art acrylic paints for use with airbrush ONLY as they are pre-thinned. Includes 6 jars of the paint colors shown on the box top.
Other Materials, Box Condition: Sealed
$18
SALE!! Includes two that are still factory sealed. It is NOS (New Old Stock) from a long closed-down hobby shop that I purchased the contents of.
Wood and Metal Model Kit, Box Condition: Sealed
$59
Still factory sealed. The Craft Air "Para-Pod" is an accessory for radio-controlled (RC) thermal gliders, designed in the mid-1970s. A gas engine is attached to the glider as an auxiliary power unit using the Para-Pod. During flight, the Para-Pod drops the engine with a parachute at a specific altitude. The glider then continues it's flight, free of the weight and drag of the engine. The system completely replaced tow-line or ground winch launches. This item is NOS (New Old Stock) from a long closed-down hobby shop that I purchased the contents of.
Plastic Model Kit, Box Condition: Good++
$225
Rare first issue with an extensive LED lighting system for the entire ship. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.
Resin Model Kit, Box Condition: Exc
$95
Very rare waterline model that features a pressure-cast (no air bubbles) high-definition cast resin hull & larger parts, two large tree of fine injection molded details, many cast metal parts, many photoetched metal details with railings and a variety of metal stock as required. Includes a full-size, four view paint guide. The kit has never been started. The parts are still in the internal factory sealed bags and includes instructions. Aikoku Maru was laid down at the Mitsui Tamano shipyards in Okayama Prefecture on 29 December 1938. The vessel measured 10,438 gross register tons,[1] with a length of 160.8 m (527 ft 7 in). Powered by two Mitsui B&W diesel engines with 13,000 shp (9,700 kW) driving twin screws, she was capable of 20.9 knots (38.7 km/h; 24.1 mph). The vessel was launched on 25 April 1940, and was named Aikoku Maru at that time.She was designed to be a combined passenger liner / cargo vessel for the Osaka Shosen Lines's regularly scheduled services to South America. Provisionally named Kyoto, the design for the new vessel was to have boasted of luxurious suite rooms. The vessel was built with large government subsidies provided from 1936 to encourage the production of large, high-speed transports and tankers, which could be quickly converted to military use in times of conflict.Although ostensibly a luxury ocean liner, the military had a say in the design of Aikoku Maru with an eye towards its future use as a troop transport. Provision was made for landing craft and for the anchoring of naval artillery. Immediately on completion on 31 August 1941, Aikoku Maru was officially requisitioned by the Imperial Japanese Navy. She was converted into an armed merchant cruiser from 5 September while still at Tamano, with the installation of four 15 cm/50 41st Year Type guns, two QF 12 pounder 12 cwt naval guns, two Type 93 13.2 mm machine guns and two twin-mount 533 mm (21 in) torpedo tubes. She was also fitted with powerful searchlights and boom for handling a Kawanishi E7K float plane (with one additional aircraft as a spare). Aikoku Maru sank the US SS Vincent cargo ship and the US SS Malama. After this, she served with a sister ship supporting submarine operations off the east coast of Africa and Mozambique. Her base shifted to Penang, where she was again successful as a merchant raider, sinking a Dutch tanker and British Freighter. Shortly after that, she captured a New Zealand freighter and put a prize crew aboard to sail back to Japan. She continued to have a varied and successful career until transport duties put an end to the raiding; she was sunk while serving as an ammunition ship in Feb. of 1944.
Plastic Model Kit, Box Condition: Exc
$34
Rare 1/48 scale kit. Part of the classic and highly detailed Bandai Pin Point 1/48 armor series. These kits are beautifully molded and feature full interior detail as well as flexible treads, many operating features & more. Never started. Inventoried and all of the tank parts are present with decals and instructions but NOTE: missing figures.
Plastic Model Kit, Box Condition: Fair
$35
1972 issue with colorful Delta decals, detailed engine pods, clear windows and detailed landing gear. Molded in the correct white and clear plastic. NOTE: builder kit ONLY. It has been started. All assembly has been done with liquid glue to 'excellent++' to 'professional' standards. The following sub-assemblies are built: two engine pods; nose wheel bay to one fuselage half; wing halves; elevator halves; two main gear doors in the 'closed' position on the center lower wing piece. There is no other assembly. The insides of the engines were correctly painted before assembly; there is no other painting. Inventoried 100% complete with all parts, decals and instructions present. The decals are in amazing 'near mint' condition.
Other Materials, Box Condition: Sealed
$22
SALE! Includes two of the #682 Du-Bro Motor Mounts. Still factory sealed and from a long closed-down hobby shop that I purchased the contents of. This part of the warehouse was rather dirty, so the bags and headers are also dirty.
Plastic Model Kit, Box Condition: Exc
$15
Features all fine recessed panel lines, 'very good' tandem cockpits, optional parts for R or RS versions, two perfectly clear canopies, optional position landing gear, underwing drop tanks and more. Includes detailed painting guide and markings for all three countries listed. Never started and inventoried complete with all parts and includes decals and instructions.
Plastic Model Kit, Box Condition: VG++
$95
Rare early issue with the Tamiya Mokei logo and unique box art Very well detailed and molded kit. Designed for motorized operation and includes metal gear box and axles with nylon gears. Drive is on the rear wheels and the batteries are in the center. The front wheels can be steered. Please note that while this model comes with the motorizing hardware, it does not come with the motor. Tamiya required that it be purchased separately. Never started. The parts are still in the internal factory sealed bags with the Tamiya paper headers and includes decals and the correct large-format fold-out instructions.
Plastic Model Kit, Box Condition: Exc
$25
From 1995 and issued in conjunction with the Star Trek Voyager TV Series. This large model measures 13 1/4 inches long (33.6mm) when assembled and has 39 pieces. Molded in beige plastic and includes a display stand. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Other Materials, Box Condition: Sealed Exc++
$30
Still factory 'round tape' sealed. This is a set of superb state-of-the art acrylic paints for use with airbrush ONLY as they are pre-thinned. Includes 6 jars of the paint colors shown on the box top.
Plastic Model Kit, Box Condition: Exc
$44
Rare. Dated 1993; well detailed and molded with all fine recessed panel lines, complete cockpit, optional position canopy, detailed gear wells, two optional style engine air filters, and more. There is a standing pilot figure & detailed paint guides and decals for 8 aircraft. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Metal Model Kit, Box Condition: Sealed Exc
$40
Still factory tape sealed. Rare and widely considered to be the finest 1/35 tracks ever made. The set is beautifully cast in metal, very highly detailed and realistic down to the proper track 'sag' at the top. Includes metal links and wire for the track pivots.
Plastic Model Kit, Box Condition: Exc
$32
Rare 1/48 scale kit. Part of the classic and highly detailed Bandai Pin Point 1/48 armor series. These kits are beautifully molded and feature full interior detail as well as flexible treads, many operating features & more. Never started. Inventoried and all of the tank parts are present with decals and instructions but NOTE: missing figures.
Plastic Model Kit, Box Condition: Good
$32
This high quality Fujimi model is an all-time favorite because of it's excellent fit, detail and scale appearance. Includes a large colorful decal sheet for three aircraft from USS America, USS Constellation and USS Coral Sea. There is a full color, multi-view painting guide on the bottom of the box. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Other Materials, Box Condition: Good++
$29
This state-of-the art set of paints can take care of many of your detailing/weathering needs for aircraft, military models and civilian cars & trucks. Includes engine grime, fuel stains, fresh engine oil, metal slag, black, dark wash, jet exhaust burnt iron, Oilbrusher rust and Streaking grime. NOTE: missing #0191 Steel and #0045 Gun Metal. The other 9 colors are included and never used.