Resin Model Kit, Box Condition: Sealed NM
$150
Still factory sealed. Rare, out of production and from 2004. This 'Aurora Box Art' issue is made from parts cast in high definition resin. Features a big 1/7 scale 11" tall figure of Wolf Man, molded grass, 15" tall dead tree, name plate and two rats. The master was sculpted by the famous Jeff Yagher.
Plastic Model Kit, Box Condition: NM
$175
Rare and much more so in remarkable, investment-grade 'Near Mint' condition. This 1965 hardbox issue had new artwork that year and is from the original well-detailed molds. This is a large, 1/8 scale model that features the horse will the armor and the Knight with armor and weapons as shown on the box top. The horse is molded in black while all other parts are molded in a darker gold. Never started and inventoried complete with all parts and includes instructions.
Other Materials, Box Condition: Sealed
$16
Still factory sealed. These decals are 'mint' condition and have always been stored in a climate controlled residence. Includes paint and markings guide. On this website are two articles that fully explain how to save or reproduce older decals; please read read these before using any older model kit or aftermarket decals. To save on or eliminate shipping for decals, please order them with model kits or order enough of them to make boxing worth while. USPS clearly states that any flexible envelope will be bent 90 degrees or more within 2 inches, so I cannot send decals in a flexible envelope. A decal reinforced with cardboard will be greater than 1/4" thick, which USPS says must go as a normal box. There is no choice; because I will not send decals to their probable destruction, shipping in a box is the only option.
Plastic Model Kit, Box Condition: Sealed Exc
$46
Includes the following factory-sealed aftermarket detail sets: Eduard #48-108 Bearcat PE Details (cockpit, gear wells and much more), True Details 48076 F8F Bearcat Resin Wheel Set, Squadron Crystal Clear Canopy 9521 1/48 F8F Bearcat and SuperScale #48-1082 Grumman F8F-1/1B/2 Bearcats VF-17, VF-12A, Officer CIC School. The Eduard set provides in abundance exactly what this kit lacks - a detailed cockpit and wheel wells. The model itself is an excellent classic kit from ex-Hawk molds. It is noteworthy for it's excellent fit & finish and the large and beautiful set of decals for the "Gulfhawk" Gulf Oil sponsored air-show aircraft flown by the famous Al Williams. Williams amazing stunt routines amazed millions of spectators over several decades; however (and unfairly), his Gulfhawk aircraft were more famous than he was. There were many Gulfhawks through the years that amazed millions of spectators, but two of the most famous were the F3F Biplane and the F8F Bearcat.
Plastic Model Kit, Box Condition: Sealed Exc
$38
The perfect 'Classic Builder' includes the following factory-sealed aftermarket details: Eduard 48-186 1/48 Typhoon PE Details (designed for this kit), Squadron Crystal Clear Canopy #9510 in mint condition (and not yellowed) and True Detail 48036 Typhoon or Early Tempest Wheel Set (two main resin wheels with smooth tread). The actual kit is still factory sealed and the 1999 Monogram Classic reissue from the original 1968 molds. Features optional position landing gear, detailed wheel wells, 'good' cockpit, optional position canopy, rotating wheels & propeller and more.
Plastic Model Kit, Box Condition: VG++
$79
1971 USA issue of this hard-to-find model that is well detailed and molded for that time. Features all fine recessed panel lines, full cockpit, pilot figure, opening canopy, complete engine detail with removable cowling, retracting landing gear, detailed gear wells, detailed cannon bay with cannons & removable access panels and more. Never started and inventoried complete with all parts and includes decals and instructions.
Plastic Model Kit, Box Condition: Exc
$24
Beautifully molded and highly detailed older model that features all fine recessed panel lines, full cockpit, detailed gear wells, pilot, drop tank and decals for three aircraft. The model as never been started. Inventoried 100% complete with all parts, decals and instructions present.
Wood Model Kit, Box Condition: Good-
$119
Very Rare. Date unknown but is likely from the late 1930s or early 1940s. This excellent pre-fabricated hardwood kit is large and very highly detailed for that time and features pre-cut and shaped hardwood parts, completely finished and machined wheels, beautifully turned gun barrel that is one foot long, sandpaper, CASCO glue, small parts envelope and two pages (front and back of one) of text and highly illustrated instructions. Never started and inventoried complete with all parts.
Multimedia Model Kit, Box Condition: Exc+
$750
The RC10 needs little introduction. It's introduction by Team Associated took the RC car world by storm and it won more National and World Championships than any other RC car. Team Associated won a combined 8 IFMAR World Championships in 1/10, 1/12 and 1/8 scale competition; no other manufacture had won more than two. This is the "Championship Edition" which was the latest racing version (at that time). This is a one-owner kit from a long-time collection. The box is in 'excellent' condition which is rare. Inside, it is exactly as it left the factory. It has never been started. Everything that was originally sealed at the factory is still in the factory sealed bags. The handful of large parts that were not sealed have been inventoried complete. Includes decals/stickers and instructions.
Plastic Model Kit, Box Condition: Exc
$250
Very well detailed with over 1290 pieces, 8 good sized brass frets with a large number of PE details, full hanger deck, airwing of F4U Corsairs & SB2C Helldivers and much, much more. Includes extensive decals for the ship, flight deck markings, flags and aircraft. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Plastic Model Kit, Box Condition: Exc
$28
Limited issue with decals for two colorful High-Vis aircraft. The model is highly detailed and features very good cockpit, optional position crew boarding door, detailed wheel wells, extendable MAD boom, external fuel tanks, weapons and more. Includes a very large, extensive and colorful decal sheet for both aircraft listed. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Other Materials, Box Condition: Sealed
$14
Still factory sealed. These decals are 'mint' condition and have always been stored in a climate controlled residence. Includes paint and markings guide. On this website are two articles that fully explain how to save or reproduce older decals; please read read these before using any older model kit or aftermarket decals. Because the USPS clearly states that any flexible envelope will be bent 90 degrees or more in 2 inches, I cannot send decals in a flexible envelope. And any decal reinforced with cardboard will be greater than 1/4" thick, which USPS says must go as a normal box. There is no choice; because I will not knowingly send decals to destruction, they will only ship decals in a box. So to save on or eliminate shipping for decals, please order them with model kits or order enough of them to make boxing worth while.
Plastic Model Kit, Box Condition: Exc
$49
Hard-to-find 1969 issue with Douglas Prototype markings. The box is in excellent condition with as-new color and gloss, four solid corners and no tape or price tags. The kit features fine raised and recessed surface detail, extended or retracted landing gear, good engine intake and exhaust detail and more. Includes an large and extensive decal sheet for the prototype/demonstrator and all blue and red stripes for the fuselage, wings and tail. Never started. Inventoried 100% complete with all parts, decals and instructions present.
Plastic Model Kit, Box Condition: Sealed Exc
$115
Still factory sealed. 1998 issue of the classic 1969 kit. Very large 1/24 scale, well detailed kit of Major Yuri Gagarin's spacecraft. Gagarin's flight was the first of 6 successful Vostok launches from the secret space center at Baikonur. Gagarin made one orbit in 108 minutes, which was enough to make him the first man in space. Titov followed in Vostok 2 and made 17 orbits. Other launches featured 4 mile passes in orbit, and Vostok 6 featured the first Woman Astronaut, Valentina Tereshkova. It is interesting that Vostok did not have attitude control for correct placement when re-entering the earth's atmosphere. The sphere was designed with the weight off-center, so it would automatically swing into position during the heat of reentry. Features detachable crew compartment, ejecting seat and Cosmonaut figure. Molded in metallic silver and clear and includes display stand.
Plastic Model Kit, Box Condition: Exc
$179
Rare, Brooklyn-produced, early 1950s U-Ma-Kit. This was Aurora's first naval model. Molded in the correct glossy very dark gray plastic and includes a display stand and decals to match the box art. Never started and complete with all parts, 'very good++' condition decals and 'near mint' instructions. The box has excellent color, four solid corners with no repairs, no fading and no price tags. The only tape is the factory sealing tape on the long sides. There is a light grease pencil price at the top center as shown and general shelf/edge wear.
Other Materials, Box Condition: Exc
$18
These decals are 'mint' condition and have always been stored in a climate controlled residence. Includes paint and markings guide. On this website are two articles that fully explain how to save or reproduce older decals; please read read these before using any older model kit or aftermarket decals. Because the USPS clearly states that any flexible envelope will be bent 90 degrees or more in 2 inches, I cannot send decals in a flexible envelope. And any decal reinforced with cardboard will be greater than 1/4" thick, which USPS says must go as a normal box. There is no choice; because I will not knowingly send decals to destruction, they will only ship decals in a box. So to save on or eliminate shipping for decals, please order them with model kits or order enough of them to make boxing worth while.
Plastic Model Kit, Box Condition: Sealed NM
$28
Still factory sealed. This is the 1999 Monogram Classic reissue from the original 1968 molds. Features optional position landing gear, detailed wheel wells, full cockpit interior, optional position canopy, rotating wheels & propeller and more.
Plastic Model Kit, Box Condition: VG++
$48
Rare 1950s issue. This fastback Thunderbolt features all recessed panel lines, full landing gear, drop tanks, separately molded sets of four 50 caliber wing machine guns, rotating propeller and more. Includes the clear two-piece Frog 'teardrop' display stand and even the green glue capsule. Never started. It has been inventoried complete with all parts and includes decals and instructions. Decals and instructions are both in amazing 'near mint' condition.
Wood Model Kit, Box Condition: Good
$80
This is a large, control line competition or sport stunter aircraft. Features precision cut foam wings, form plastic fuselage top, cowling and lower air scoop, clear bubble canopy with framing, printed fuselage sides (build directly on the wood), large hardware pack with heavy duty nylon bellcrank, nylon hinges & nylon control horns, colorful decals, formed torsion bar landing gear, die-cut balsa and plywood parts, text instructions and full size plans. NOTE: this kit has very minor and neat adult constructions as noted: wood leading edges glued to foam cores. There is no other assembly. Quality of construction is excellent. The leading edges are very neatly sanded to the correct shape. Inventoried and NOTE: missing some stock sheets and one easy-to-make block. Details: missing (5) of (6) 1/16 thick balsa cover sheets for the wing; (1) small sheet of 1/8 balsa sheeting for the lower mid section of the fuselage; and (1) of (2) 1/2" 45 degree blocks; easy to make since the other is present as a pattern. Otherwise complete with all other parts, decals and all paperwork present. NOTE: this kit came in a very sturdy and thick cardboard box. It will ship in that box wrapped in thick brown paper. If you wish for it to be placed inside another box, let me know in the 'comments' section of checkout but be aware that additional shipping charges will apply.
Other Materials, Box Condition: Good
$12
These decals are 'mint' condition and have always been stored in a climate controlled residence. Includes paint and markings guide. On this website are two articles that fully explain how to save or reproduce older decals; please read read these before using any older model kit or aftermarket decals. Because the USPS clearly states that any flexible envelope will be bent 90 degrees or more within 2 inches due to automatic sorting machines, I cannot send decals in a flexible envelope. And any decal reinforced with cardboard will be equal to or greater than 1/4" thick, which USPS says must go at the normal 'box' rate. There is no choice; because I will not knowingly send decals to destruction, they will only ship in a box. So to eliminate or save significantly on shipping charges, please order them with model kits. Likewise, if you only purchase decals, try to order enough decals make the shipping cost (per sheet) worth while.
