Be the first to know when kits are listed!
Plastic Model Kit, Box Condition: Exc
$25
From 1995 and issued in conjunction with the Star Trek Voyager TV Series. This large model measures 13 1/4 inches long (33.6mm) when assembled and has 39 pieces. Molded in beige plastic and includes a display stand. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Other Materials, Box Condition: Sealed Exc++
$30
Still factory 'round tape' sealed. This is a set of superb state-of-the art acrylic paints for use with airbrush ONLY as they are pre-thinned. Includes 6 jars of the paint colors shown on the box top.
Plastic Model Kit, Box Condition: Exc
$44
Rare. Dated 1993; well detailed and molded with all fine recessed panel lines, complete cockpit, optional position canopy, detailed gear wells, two optional style engine air filters, and more. There is a standing pilot figure & detailed paint guides and decals for 8 aircraft. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Plastic Model Kit, Box Condition: NM
$320
Very rare, out of production and incredibly well detailed model numerous cast metal parts, high-definition resin parts, numerous photoetched details on two frets, metal springs, wiring, rubber tires with yellow 'Pirelli - Stelvio' letter ina dn more. The kit has not been started. All parts are still in the factory sealed bags and includes decals. NOTE: missing instructions. All of the bags and containers are present as I have seen this kit before. However, the collector removed all of his instructions and stored them 'in a safe place.' While all his kits have been complete, no one knows where the safe place was.
Plastic Model Kit, Box Condition: Exc
$110
Late 1950s rare first issue of this very high quality, full-hull kit. Features a one piece hull, nine individually elevating 16" guns, rotating main and secondary turrets, fully detailed forward and aft island structures with radar, gun directors and range finders, individually molded 20mm guns with shields, helicopter, full rudder and propeller detail, detailed deck, flag sheet and full decals including draft markings. Never started. Inventoried and NOTE: missing one part, the #45 jackstaff. Easily made from wire or pulled sprue as it is simply a flag pole. Includes all other parts, decals and instructions. The decals are flat, 100% intact and in 'excellent' condition but the white and black colors are off-register. If you want to build the model, I recommend the superb Starfighter Decals 1/500 Cold War Cruisers which has multiple sizes of hull numbers in large quantities and much more.
Metal Model Kit, Box Condition: Sealed Exc
$40
Still factory tape sealed. Rare and widely considered to be the finest 1/35 tracks ever made. The set is beautifully cast in metal, very highly detailed and realistic down to the proper track 'sag' at the top. Includes metal links and wire for the track pivots.
Plastic Model Kit, Box Condition: Exc
$32
Rare 1/48 scale kit. Part of the classic and highly detailed Bandai Pin Point 1/48 armor series. These kits are beautifully molded and feature full interior detail as well as flexible treads, many operating features & more. Never started. Inventoried and all of the tank parts are present with decals and instructions but NOTE: missing figures.
Plastic Model Kit, Box Condition: VG+
$22
This 1996 model ilnclude a very large Tie Fighter model and special base that makes it look like it is suspended in flight. Never started and inventoried complete with all parts and includes instructions.
Plastic Model Kit, Box Condition: Good
$32
This high quality Fujimi model is an all-time favorite because of it's excellent fit, detail and scale appearance. Includes a large colorful decal sheet for three aircraft from USS America, USS Constellation and USS Coral Sea. There is a full color, multi-view painting guide on the bottom of the box. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Other Materials, Box Condition: Good++
$29
This state-of-the art set of paints can take care of many of your detailing/weathering needs for aircraft, military models and civilian cars & trucks. Includes engine grime, fuel stains, fresh engine oil, metal slag, black, dark wash, jet exhaust burnt iron, Oilbrusher rust and Streaking grime. NOTE: missing #0191 Steel and #0045 Gun Metal. The other 9 colors are included and never used.
Plastic Model Kit, Box Condition: VG
$74
This is a fine kit of Japan's famous and reliable turboprop transport. Includes a beautiful, full color, frameable print of the box top artwork by Ken-ichi Ishibashi. It includes interior cabin seating in the form of a factory-sealed set of Pikestuff #4103 Coach Seats in 1/87 scale. They are dual seats and there are 6 rows and each row is 3 inches long, so they fit the fuselage perfectly length and width-wise (yes, the kit has a cabin floor). The model features working trailing edge wing split flaps, rotating propellers. working rudder, detailed landing gear, clear cabin and cockpit windows, full length cabin floor and more. Includes a detailed four-view painting guide and very large & colorful decal sheet for either scheme. Never started. Factory sealed bags with decals and instructions present.
Plastic Model Kit, Box Condition: Exc
$269
Build the ultimate Yamato in 1/350 with this Tamiya kit and well over $300 worth of aftermarket parts! Includes the following never used and factory sealed or inventoried complete & internally sealed upgrade sets: Flyhawk FH350170 PE Super Detail-up Set, Alliance Modelworks NW35007 Degaussing Circuits, Genuine Model (Chrsanthemum & Sword) GM35010 Yamato Update Set Bulwark 1945, Quantity (2) Tamiya 12642 Photo Etched Handrail Set A, G Factor 35021 Brass Propellers, Artworx AM10002A Wood Deck & Deck Masking, Fstar FS351028 Ship Vent 1 (small size) 12 pcs., Chrsanthemum & Sword IJN Lifebouy Set, Chrsanthemum & Sword Ventilation Fans and Chrsanthemum & Sword IJN Ammunition Box Set. The actual model is a large-scale, highly detailed kit and clearly the finest 1/350 Yamato made to date. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Plastic Model Kit, Box Condition: Good+
$115
Big 1/48 scale model with a large 33 inch wingspan. Fantastic detail with full flight deck and cargo hold with opening rear cargo doors to show details. Has decals for three nationalities. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Plastic Model Kit, Box Condition: VG
$38
1970s Fujimi Mokei issue is well molded. This large 1/48 scale model features fine recessed and raised panel lines, good dual cockpits, two pilot figures, refueling probe, wing cannons, drop tanks, numerous iron bombs, rocket pods and more. Includes decals for the Royal Australian Navy TA-4G and both US Squadrons. The kit has never been started. The small parts are still in the internal factory sealed bag; the other parts have been inventoried complete. Including decals and instructions. Includes a full color painting guide but it does have age spots.
Other Materials, Box Condition: Sealed NM
$19
In factory new condition. These are acrylic paints for use with a brush or airbrush; they can be thinned with MIG thinner or any compatible acrylic thinner. Includes four 17ml jars with dunkelgelb dark base, dunkelgelb base, dunkelgelb light base and dunkelgelg highlight colors. Never used and complete.
Plastic Model Kit, Box Condition: Sealed Exc++
$69
Still factory sealed and rare in this condition. 1965 hardbox issue and the first motorized F-86 release with jet sound. Features electric motor, hardware, battery stand, full landing gear, two drop tanks, underwing missiles, pilot & ejection seat and more. Lindberg is a company with a fascinating history The original 'Lindberg Line' stretches back to the 1930s when Paul Lindberg drew plans for famous modeling magazines and marketed his balsa wood 'stick and tissue' by urging dealers to carry the '...Complete Lindberg Line'. After the war, Lindberg and Olsen had a strong hand in early United States injection molded kit development. Please see the article located on this website about early USA plastic kit manufacturers.
Other Materials, Box Condition: NM+
$18
NOS (New Old Stock - never opened) from a long-closed down hobby shop that I purchased the contents of.
Plastic Model Kit, Box Condition: No Box
$20
Bagged kit. No Box - the box is shown for reference only. When Monogram bought the Aurora molds in the mid 1970s, they reissued the kits that were the most accurate. Since Aurora had reworked the molds on the Camel, this was one that was chosen. Builds a very nice kit. Never started and inventoried complete with all parts and includes decals and instructions.
Plastic Model Kit, Box Condition: NM+
$145
First issue dated 1956 and in amazing, investment-grade 'Near Mint+' condition. The classic artwork is another example of why these Revell 'S' issues so famous and valuable. The box has perfect color and gloss The only things keeping it from being mint is very slight and isolated wear. Features folding wings and horizontal stabilizer, rotating and elevating rear gun turret, optional position landing gear, speed brakes & escape hatch, three crew figures and more. Includes the famous clear Revell 'Globe' stand. Never started. It has been inventoried complete with all parts and includes decals and instructions. Instructions are in 'excellent+' condition and the decals are 'near mint.'
Plastic Model Kit, Box Condition: VG++
$115
Early issue "Nitto Kagaku" logo with superior mold quality. This large scale model measures 18 inches long when assembled and features very fine surface detail, clear cabin and cockpit windows, cockpit floor & bulkhead, optional position rear airstair door, optional position landing gear, clear wingtip navigation lights and more. Includes a display stand and a very large& colorful decal sheets for ANA. Decals are in 'excellent++' condition. The kit has never been started. The parts that were factory sealed (the small parts) are still in the sealed bags. The parts that are not factory sealed have been inventoried complete including decals and instructions.