Welcome to Old Model Kits
AMT Dick Tracey - 1936 Ford Coupe, 1/25, 6107
Plastic Model Kit, Box Condition: Good
$22
1990 issue of this classic kit used as a tie-in with the Walt Disney movie. Features detailed V-8 Flathead Engine, removable hood, opening rumble seat, rear spare tire holder, good chassis underside detail, full interior and more. Molded in black, clear, chrome plate and with rubber tires. The kit has never been started. Never started and inventoried complete with all parts and includes instructions. Please note that AMT did not include any decals with this kit. NOTE: one part, the air cleaner base, is a different color plastic. It is from an earlier issue of this same kit.
Showcase Models Australia HMS/HMAS Vendetta - W & V Class Destroyer - With Decals For Many DDs Of The Class, 1/350, ANN002
Plastic Model Kit, Box Condition: Exc++
$48
Very highly detailed and includes three styles of hull numbers so you can build one of many of the W & V (Wallace & Vampire) class destroyers of the Royal Navy or Australia. The kit features a full, one-piece hull, highly detailed and extensive deck fittings, weapons & superstructure, two frets of brass PE with numerous pieces, ships boats, davits and much more. Includes a full color, full-size, three-view painting guide and a very large and extensive decal sheet. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Dragon USS Princeton Aircraft Carrier - Essex Class Straight Deck - With Decals For Boxer Tarawa Leyte Valley Forge Philippine Sea, 1/700, 7079
Plastic Model Kit, Box Condition: Exc
$68
From all new molds. Very highly detailed and features over 400 pieces, options to build full hull or waterline versions, complete hanger deck detail, brass PE details, airwing of S2F-1 ASW and HSS-1 Helicopters molded in clear plastic and much, much more. Includes an excellent painting guide and a very large and extensive decal sheet for all ships listed, flight deck markings, airwing and more. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Monogram B-58 Hustler - Strategic Air Command Delta Wing Supersonic Bomber, 1/48, 5704
Plastic Model Kit, Box Condition: Good
$110
From 1985 and the first issue with the best mold quality. This large model features raised and recessed panel and control surface outlines, highly detailed landing gear & wheel wells, full pilot's cockpit and unique ejection pod, opened or closed hatch, four optional externally-mounted nuclear bombs, two pod choices more. Includes a big multi-view paint guide and extensive decals for the 'Bendix Trophy Winner' that made the record New York to London run. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions. Decals are in 'near mint' condition and instructions are 'excellent.'
Lindberg Blue Devil Fletcher Class Destroyer Motorized For R/C, 1/125, 815M
Plastic Model Kit, Box Condition: Fair++
$109
This famous model is dated 1975 and is from the original 1960s molds. Very large scale kit, well detailed for that time and very strongly made model for high-speed water operation. It can be built for display, free run or easily convert it to remote control. For free running it can be programmed with different cams to do rectangles, figure 8, circle or go straight. NOTE: this kit has very minor and neatly done adult assembly to step one (6 pieces of the lower superstructure base) and inside the hull, two lateral braces are glue din. Assembly quality is 'excellent' or better and liquid glue was used. There is no other assembly. Inventoried and 100% complete with all parts, decals, flag sheet and instructions present. The box is 100% intact but only graded 'fair++' because of stains and significant general wear as shown.
AMT Tyrone Malones Kenworth Custom Drag Truck, 1/25, AMT1157-06
Plastic Model Kit, Box Condition: Sealed Exc+
$36
Still factory sealed. This is a 2021 reissue of this highly detailed kit with over 165 pieces.
AMT Kenworth Conventional W-925 -Tractor Semi Truck, 1/25, AMT1021-06
Plastic Model Kit, Box Condition: Sealed NM
$42
Still factory sealed. 2017 reissue from the original molds. This super-detailed truck has over 300 parts and many in chrome. Features retooled sleeper and battery box parts, expanded decal sheet, full rolling chassis build up just like the real truck, complete interior cab and sleeper cab detail, one-piece tilting hood, vinyl air/hydraulic hoses, dual exhaust, fifth wheel assembly, hollow vinyl truck tires, straight or curved exhaust stacks, stock or custom rear wheel hubs, "Spicer" main 5 Speed and Auxiliary 4 Speed Transmissions, Air Ride Driver's Seat, 855 CID Turbo Charged Cummings Diesel Engine and more.
AMT Great Dane 40 Foot Trailer Sprite, 1/25, AMT1467
Vaccuform Model Kit, Box Condition: Sealed NM+
$48
Still factory sealed and the 2024 issue from original ERTL molds. Well detailed kit with over 100 parts and a very large and colorful Coca Cola Company Sprite decal sheet with several variations. Features operating 'Select-A-Point' sliding suspension, two position support assembly with optional wheels or sand shoes, detailed suspension, opening doors and more. Molded in white, black, chrome plate and red-tinted clear plastic and with rubber tires.
AMT Schlitz Mack Cruise-Liner Semi Tractor, 1/25, T553
Vaccuform Model Kit, Box Condition: Good
$129
Rare and from the 1970s. This highly detailed model features full rolling chassis build up just like the actual semi, detailed front and rear suspension, differentials, drive line, brake actuators, complete engine and engine compartment, detailed 90 degree tilting sleeper cab with complete interior and much more. Molded in white, clear, orange-tinted clear, red-tinted clear, chrome plate and with rubber tires. Never started. Inside, it is as it left the factory, with all white and chrome plated parts still in the factory sealed bags. The only parts that were not factory bagged, the clear and tires, have been inventoried complete. Includes decals and instructions. The decals are in 'excellent+++' condition.
AMT Fruehauf FB 40 Foot Refrigerator Van - Reefer Semi Trailer - Watkins, 1/25, AMT1421-06
Plastic Model Kit, Box Condition: Sealed NM+
$34
Still factory sealed. This is the 2023 reissue from the original 1970s molds. Measures nearly 20 inches long when assembled. Features opening door, fully detailed inside floor and side panels, four 'Spyder' spoke dual wheel assemblies, rubber hollow tires, authentic Refrigerator Unit with expansion tank and control boxes, detailed F-2 tandem suspension, real rubber air lines, two position front supports and more. Includes a very large, colorful and expanded Watkins decal sheet.
AMT Lowboy Drop Deck Lowbed Trailer by Loadcraft With Payload, 1/25, T508
Plastic Model Kit, Box Condition: Good+
$44
Hard-to-find and highly detailed 1970s early issue that is over 16 inches long when built and attaches to any of the AMT tractors. Features over 200 pieces, super detailed two-spring rockerbeam suspension on a twelve-tire, three axle system, three payload transformers, four small insulators, three cable reels with supports, cable beam, two location flags and more. Molded in white, light gray, red-tinted clear and with metal axles and rubber tires. The kit has never been started. All white and gray parts are still in the factory sealed bags. The clear and tires were never sealed and have been inventoried complete. Includes instructions. Please note that AMT did not included decals with this issue.
AMT Fruehauf Texaco Tanker Trailer, 1/25, 30063
Plastic Model Kit, Box Condition: Sealed VG
$32
Still factory sealed but the seal has shrunk with age and drawn the lower top end concave as shown. This is a well detailed tanker kit that features two position supports, detailed suspension, spare tire, rim and tire carrier, pipe and valve detail and more.
AMT Peterbilt Wrecker Tow Truck - Gulf / Sunoco / Union 76 / Don's Truck Plaza Compton CA, 1/25, 6667
Plastic Model Kit, Box Condition: Fair
$45
Very highly detailed kit most likely from the 1980s. Features over 200 pieces, complete engine and engine compartment, detailed cab with complete interior, opening hood, complete rolling chassis build just like the actual truck, full suspension, differentials, drive line & underside details, accessories, working boom and much more. The kit has never been started. Many parts are still in factory sealed bags. The ones that are no longer sealed (or were never sealed) have been inventoried complete. Includes instructions and decals.
AMT US Mail Tractor Trailer Set - Ford C-900 Tilt-Cab Tractor and Trailmobile 27 Foot Van, 1/25, T549
Plastic Model Kit, Box Condition: Good+
$39
Large-scale, highly detailed kit with a large number of parts. Features rolling chassis build up like the real truck, detailed Ford 534 CID Super-Duty V8 engine, tilting cab, full suspension, complete interior, 17 inch long trailer with operating Todco overhead sliding door, two-position supports, full suspension and spoke wheels. Molded in white, clear, red-tinted clear and with rubber tires. Decals are in amazing 'near mint' condition. The kit has never been started. The parts that were factory sealed are still in the sealed bags. The parts that were not factory sealed (clear only) have been inventoried and NOTE: missing one spotlight lens. Otherwise complete including decals and instructions. NOTE: the right side (door section) of the windshield is cracked. The front part of the windshield is fine.
Trumpeter USS Detroit AOE-4 - Fast Combat Support Ship, 1/700, 05786
Plastic Model Kit, Box Condition: Exc+
$18
This is a finely molded kit that can be built full hull or waterline. Includes numerous injection molded parts and PE details. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Revell Kenworth W-900 - Blue Diamond - Semi Truck / Tractor, 1/25, 07538
Plastic Model Kit, Box Condition: Good++
$64
1992 issue of the excellent model features 230 pieces, detailed engine and engine compartment, opening hood, complete cab detail, sleeper, full underside suspension, exhaust & chassis detail, rubber tires and much more. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Glencoe USS Oregon Battleship BB-3 - (Indiana Class) - With Decals for USS Indiana (BB-1) / USS Massachusetts (BB-2), 1/225, 08301
Plastic Model Kit, Box Condition: Sealed VG
$95
Still factory sealed. From ex-ITC molds that originally dated about 1959/1960. Stirring Jack Leynnwood box art showing the ship at Santiago de Cuba, 1898, with the 13" guns blazing. This large scale, full hull model is well detailed for tha time and includes decals for all three battleships. The USS Oregon had a famous career in the Spanish American War.
UPC F-86D Sabre Dog - (ex Marusan), 1/50, 5051-100
Plastic Model Kit, Box Condition: Good
$65
Early 1970s issue with Scott Eidson hardbox artwork. The Marusan F-86D model is known for an amazing array of action features and accessories, and the UPC reissue includes them all. This model has removable radome to display the radar, opening canopy, removable tail section with dolly and detailed jet engine with engine stand, operating leading edge slats, operating wing flaps, moving control surfaces, retracting landing gear, retracting/extending missile tray, boarding ladder, and extra missiles with missile cart. The kit has never been started. It has been inventoried and the actual aircraft is complete, but NOTE: missing the base for one ground figure. Otherwise complete with all other parts and includes decals and instructions. This is at least the third edition of this UPC kit as the first one had a rather graphic error - it pictured F-86 Saberjets on the box - NOT the F-86D 'Dog version. UPC stood for Universal Powermaster Corporation which was based out of New York City, NY. UPC did not cut their own molds, but bought kits already molded from other manufacturers and re-boxed the kits in the USA. Scott Eidson, the famous artist best known for his artwork with Revell, also did UPC box art in the 1960s. All UPC production ended in the 1970s.
UPC Coventry II Armored Car - (ex Tamiya), 1/35, 5161-100
Plastic Model Kit, Box Condition: Exc++
$78
Rare model from the original Tamiya molds. Molded in olive drab plastic with rubber tires. Never started and inventoried complete with all parts and includes decals and instructions. Please note that UPC sold the motorizing parts separately; so any motorizing parts shown in the instructions are not present. UPC stood for Universal Powermaster Corporation which was based out of New York City, NY. UPC did not cut their own molds, but bought kits already molded from other manufacturers and re-boxed the kits in the USA. Scott Eidson, the famous artist best known for his artwork with Revell, also did UPC box art in the 1960s. All UPC production ended in the 1970s.
MPC Douglas DC-9-30 Eastern Airlines - (DC-9), 1/144, 1-4703
Plastic Model Kit, Box Condition: Fair-
$18
Hard to find -30 version of the venerable short-haul transport. Features optional position boarding and baggage doors, optional position landing gear, clear windows and Eastern Airlines decals. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions. NOTE: the instructions are partially stuck fast to the instructions; you will need to furnish your own decals or reproduce these at home using the instructions located in the two articles (on this website) about how to save and reproduce decals.