Other Materials, Box Condition: Sealed
$18
Still factory sealed. These decals are 'mint' condition and have always been stored in a climate controlled residence. Includes paint and markings guide. On this website are two articles that fully explain how to save or reproduce older decals; please read read these before using any older model kit or aftermarket decals. Because the USPS clearly states that any flexible envelope will be bent 90 degrees or more within 2 inches due to automatic sorting machines, I cannot send decals in a flexible envelope. And any decal reinforced with cardboard will be equal to or greater than 1/4" thick, which USPS says must go at the normal 'box' rate. There is no choice; because I will not knowingly send decals to destruction, they will only ship in a box. So to eliminate or save significantly on shipping charges, please order them with model kits. Likewise, if you only purchase decals, try to order enough decals make the shipping cost (per sheet) worth while.
Resin Model Kit, Box Condition: Exc+++
$64
Rare and superior in detail. Features full hull or waterline build, PE fret of details, factory-painted PE flags, turned metal brass main gun barrels, factory-painted brass name plate, very fine injection molded parts and much more. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Plastic Model Kit, Box Condition: VG
$110
Minihobby received permission from Tamiya to directly copy their all-time classic 1/350 USS Enterprise. As a result, the parts and detailing are almost identical to the 1980s Tamiya release. If you are an R/C (radio control) fan, the main difference is that the Minihobby kit was designed for operation in water and there is plenty of room for a larger battery and any R/C equipment you could imagine. This is the motorized version with an electric motor gear box and drive on all four propellers. If built for water operation or static display, it includes all of the well-know features and details of the Tamiya model. Never started. Most of the parts are still in the factory sealed bags. The few that are not factory sealed have been inventoried complete. Includes electric motor and motorizing hardware. With decals and instructions.
Plastic Model Kit, Box Condition: Exc+
$250
Build the ultimate 1/350 'Jeep Carrier' with this kit and all of the following factory-sealed detail sets: White Ensign PE35149 Independence The Ship Carrier PE Upgrade Set, White Ensign quantity (2) PE#35150 Independence Airwing PE Details, Artwox #AW10011 Independence Wood Deck, G Factor Brass Propellers, quantity (2) Trumpeter #06210 Grumman F6F Hellcats (6 per pack, so 12 aircraft total), quantity (2) Alliance Modelworks #NW35031 WWII USN 40mm Bofors Twin Mounted (6 twin mounts per pack, so 12 twin mounts total), quantity (4) sets of different and superbly printed Shapeways 3D Printed Upgrade Parts for this kit, Master SM350-050 Oerlkon 20mm/70 UNS Type (20 guns with brass pedestals), Master SM-350-014 Bofors 40mm/56 Barrels (brass, 20 pieces total) and GPM Pe Brass 1mm Portholes (about 625 of them by my rough count). The actual model is outstanding. Features over 1,300 parts, an airwing molded in clear, numerous PE parts on several frets and much more. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Plastic Model Kit, Box Condition: Exc
$525
This huge kit is from all new, state-of-the-art molds and measures over 4 feet long when assembled. It features over 2,800 pieces, has 15 frets of PE details and is the last word in Yamato model kits. Never started. Inside, the kit is exactly as it left the factory with everything factory-sealed and in the correct boxes. Includes a large and extensive decal sheet and an instructions book (yes, literally a 95 page book.)
Vaccuform Model Kit, Box Condition: Good
$129
Rare and from the 1970s. This highly detailed model features full rolling chassis build up just like the actual semi, detailed front and rear suspension, differentials, drive line, brake actuators, complete engine and engine compartment, detailed 90 degree tilting sleeper cab with complete interior and much more. Molded in white, clear, orange-tinted clear, red-tinted clear, chrome plate and with rubber tires. Never started. Inside, it is as it left the factory, with all white and chrome plated parts still in the factory sealed bags. The only parts that were not factory bagged, the clear and tires, have been inventoried complete. Includes decals and instructions. The decals are in 'excellent+++' condition.
Plastic Model Kit, Box Condition: Sealed Exc+
$245
Still factory sealed and very rare in this condition. This kit was issued as a tie-in to the 1978 hit movie 'Convoy' and depicts the famous 'Rubber Duck' call sign truck. Features over 275 pieces, rolling chassis construction like the actual truck, massive 'Bull Bar' front bumper, twin CB antennas, roof-mounted air deflector, complete 672 CID Maxidyne 6 Cylinder Engine, detailed cab & sleep with complete interior, opening hood, full suspension and underside details and more.
Plastic Model Kit, Box Condition: Good+
$39
Large-scale, highly detailed kit with a large number of parts. Features rolling chassis build up like the real truck, detailed Ford 534 CID Super-Duty V8 engine, tilting cab, full suspension, complete interior, 17 inch long trailer with operating Todco overhead sliding door, two-position supports, full suspension and spoke wheels. Molded in white, clear, red-tinted clear and with rubber tires. Decals are in amazing 'near mint' condition. The kit has never been started. The parts that were factory sealed are still in the sealed bags. The parts that were not factory sealed (clear only) have been inventoried and NOTE: missing one spotlight lens. Otherwise complete including decals and instructions. NOTE: the right side (door section) of the windshield is cracked. The front part of the windshield is fine.
Plastic Model Kit, Box Condition: Good-
$22
Very well detailed and molded kit. Features one piece hull, complete rudder and propellers with shaft, detailed deck and island structure, display stand, aircraft deck crane, moving elevators, extensive decals for the ship and aircraft and RA-5C Vigilante, A-4 Skyhawk, A-6 Intruder, A-7 Corsair II, E-2 Hawkeye, EA-6 Prowler, F-4 Phantom, F8 Crusader, F-14 Tomcat, F/A-18 Hornet, S-3 Viking, SH-3 Seaking and SH-60 helicopters and aircraft. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions. NOTE: there is a 4 x 2 inch section neatly cut out from the lower side panel.
Plastic Model Kit, Box Condition: Good++
$74
Includes the following faxctory-sealed aftermarket accessories KFS Real Metal 5 Bar Diamond Tread Plate, KFS Kenworth 1/24 Mud Flaps (PE steel, relief etched), Auslowe Model Accessories #BO10 1/24-25 Bug Deflector Set MM Wide (green tinted clear and metal) and R&C Trucking Two- Hole 1/24 Front and Rear Rims (includes four two hole rims with center caps, other parts and full instructions). Last is a Kangaroo 1/25 Scale PE Steel Nude Ladies Set, which is partially used. Still contains the following: 6 big stars 8 smaller starts, four lighting bolts, one large nude, one medium nude, 4 small sitting nudes (2 left and 2 right) and 4 small laying nudes (2 left and 2 right). The actual kit is the 1992 issue which features 230 pieces, detailed engine and engine compartment, opening hood, complete cab detail, sleeper, full underside suspension, exhaust & chassis detail, rubber tires and much more. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions. NOTE the instructions are quality photocopies.
Other Materials, Box Condition: Good++
$20
Rare. These decals are 'mint' condition and have always been stored in a climate controlled residence. Includes paint and markings guide. On this website are two articles that fully explain how to save or reproduce older decals; please read read these before using any older model kit or aftermarket decals. To save on or eliminate shipping for decals, please order them with model kits or order enough of them to make boxing worth while. USPS clearly states that any flexible envelope will be bent 90 degrees or more within 2 inches, so I cannot send decals in a flexible envelope. A decal reinforced with cardboard will be greater than 1/4" thick, which USPS says must go as a normal box. There is no choice; because I will not send decals to their probable destruction, shipping in a box is the only option. I inquired about sending decals via "Media Mail" as the looks like the perfect solution; however, the US Post Master specifically called out decals as not being Media mail and prohibiting using it in that way. Yes, some businesses do anyway but it is against regulations. I have a great relationship with USPS and I cannot put that at risk.
Plastic Model Kit, Box Condition: Sealed VG++
$22
Still factory sealed but the seal has split on the box top as shown. This 1978 model features fine raised panel lines and recessed control surface lines, very good cockpit, optional position landing gear and more. Includes paint guide and decals for the RAF Spitfire on the box top or an East India based aircraft.
Plastic Model Kit, Box Condition: VG+
$28
Early issue copyright dated 1964 in the two piece box with frameable artwork. Molded in gloss light gray and clear. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.
Plastic Model Kit, Box Condition: Exc-
$54
Early issue dated 1969; but from the lack of a price extension on the part number it is from the early 1970s. Large 1/32 scale model has very good detail and features full Jumo engine with removable cowling, detailed interior, sliding canopy, bomb load, crew figures and more. Never started. It has been inventoried complete with all parts and includes decals and instructions. Please note that the box displays almost 'near mint' but is graded 'excellent-' because there is residue from old (and long since gone) masking tape on the lower center of the four box sides.
Plastic Model Kit, Box Condition: VG++
$44
1971 USA issue of this popular model features a very good cockpit, pilot figure, opening canopy, detailed Jumo jet engine, removable engine cowl and more. Never started and inventoried complete with all parts and includes decals and instructions.
Plastic Model Kit, Box Condition: Sealed VG
$49
Still factory sealed but the seal has drawn the box top concave as shown. Dated 1968 and an excellent, large-scale kit for that time. Features complete interior detail, rotating wheels & propellers and full color decals (including all stripes) for the center aircraft on the box art. Usually molded in white and clear.
Plastic Model Kit, Box Condition: Exc+
$74
Hard-to-find 1964 hardbox issue with classic John Steel box art. At that time, reviewers wrote that Aurora made the finest armor kits; the Tiger is no exception. Features working bogies and sprockets, flexible black track (in fine condition), optional opened or closed hull and turret hatches, bow machine gun, spotlight, tow hooks, mufflers & covers, spare tracks, tank commander and three soldiers. Molded in gray with flexible black treads. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. Please note that the box top displays as a stunning 'near mint'. However, it is only graded 'excellent+' because there is small amounts of light tape residue at the center of all four box side panels. The tape fell off long ago due to age.
Other Materials, Box Condition: Exc+
$18
These decals are 'mint' condition and have always been stored in a climate controlled residence. Includes paint and markings guide. On this website are two articles that fully explain how to save or reproduce older decals; please read read these before using any older model kit or aftermarket decals. To save on or eliminate shipping for decals, please order them with model kits or order enough of them to make boxing worth while. USPS clearly states that any flexible envelope will be bent 90 degrees or more within 2 inches, so I cannot send decals in a flexible envelope. A decal reinforced with cardboard will be greater than 1/4" thick, which USPS says must go as a normal box. There is no choice; because I will not send decals to their probable destruction, shipping in a box is the only option. I inquired about sending decals via "Media Mail" as the looks like the perfect solution; however, the US Post Master specifically called out decals as not being Media mail and prohibiting using it in that way. Yes, some businesses do anyway but it is against regulations. I have a great relationship with USPS and I cannot put that at risk.
Plastic Model Kit, Box Condition: Sealed Mint
$74
First issue from 1964 that is still factory sealed and in remarkable, investment-grade "Mint" box condition. This model kit is part of a very popular and successful 1/48 scale line of World War II kits that Monogram issued starting in the early 1960s. It includes all parts and decals to build any of the five versions; can also be built as two additional versions - Mark IIA and Mark IIB as per the introduction on the instructions. Features a wide variety of guns, bombs, rockets and cannon, retracting landing gear and rotating propeller & wheels and more. Usually olded in a beautiful gloss medium gray, black and clear plastic.
Other Materials, Box Condition: Sealed
$24
Rare and still factory sealed. These decals are 'mint' condition and have always been stored in a climate controlled residence. Includes paint and markings guide. On this website are two articles that fully explain how to save or reproduce older decals; please read read these before using any older model kit or aftermarket decals. To save on or eliminate shipping for decals, please order them with model kits or order enough of them to make boxing worth while. USPS clearly states that any flexible envelope will be bent 90 degrees or more within 2 inches, so I cannot send decals in a flexible envelope. A decal reinforced with cardboard will be greater than 1/4" thick, which USPS says must go as a normal box. There is no choice; because I will not send decals to their probable destruction, shipping in a box is the only option. I inquired about sending decals via "Media Mail" as the looks like the perfect solution; however, the US Post Master specifically called out decals as not being Media mail and prohibiting using it in that way. Yes, some businesses do anyway but it is against regulations. I have a great relationship with USPS and I will not endanger it.
