🚚 Check out our new lower shipping rates! Click here for details.

Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be first to know when kits are listed!
OMK Shopping Cart 0
home about the kits ordering
Plastic Model Kit Articles and Howtos
Can't find the kit you want? Email us.

Plastic model kits, airplane kits, etc., for sale...

  Welcome to Old Model Kits

Monogram F-111A Swing Wing Fighter - With Resin Big Pylons, 1/48, 5804

Plastic Model Kit,   Box Condition: VG

F-111A Swing Wing Fighter - With Resin Big Pylons

$54   

Includes four large wing weapons pylons made from cast high-definition resin (the Monogram kit has only the 'short' pylons). They have recessed panel lines and are finely made but the manufacture is not listed. The actual kit is the 1981 issue. Finely molded and features swinging wings, full cockpit, two pilots, detailed gear bays, external stores and more. Never started and inventoried complete with all parts and includes decals and instructions.

ITC Stinson Model T Tri-Motor - Eastern Air Service, 1/61, 3722

Plastic Model Kit,   Box Condition: VG

Stinson Model T Tri-Motor - Eastern Air Service

$149   

Sale Pending
Email for availability

Rare. This famous early 1930s transport saw widespread use and was the primary competition of the Ford Tri-Motor. The aircraft was the brainchild of E.L. Cord, the owner of the Auburn-Cord-Duesenberg automobile company and the money behind the aircraft. Cord also owned Lycoming, who manufactured the engines that ended up on the final product. Another of Cord's companies was Century Airlines, which naturally used the aircraft. Century later became part of American Airlines. The Model T was used by many other airlines including Eastern, Delta, Braniff, TWA, United and American when they rolled up Century. The Stinson Tri-Motor carried 10 passengers, baggage and of course the mail, which was critical to early airline revenue. The aircraft proved successful and economical to operate. The model features mainly recessed panel lines & some fine raised detail, clear cabin and cockpit windows, pilots & cabin passengers, good, basic engine detail and more. Includes a blue-tinted clear display stand, painting guide and Eastern Air Service decals. Never started. The clear parts are still in the factory sealed clear bag; the parts that were never sealed have been inventoried complete. Includes decals and instructions with both in remarkable 'Near Mint' condition.

Otaki German Army Armored Car Puma 3 Motorized - Sd.Kfz. 234/2 Mit 5cm KWK. L/60, 1/35, OT4-2-300

Plastic Model Kit,   Box Condition: Good

German Army Armored Car Puma 3 Motorized - Sd.Kfz. 234/2 Mit 5cm KWK. L/60

$54   

Sale Pending
Email for availability

Most likely from the early 1970s. This 'Big Gun' L/60 equipped Puma is well detailed for that time and features a Mabuchi motor, pinion gears, all-metal gear box, complete metal running hardware and wiring, metal front steering gear, rubber tires, injection molded man parts, working drive wheel suspension, rotating turret, gun ports, headlights, spare tire holder and much more. Never started. The hardware parts are still in the factory sealed bag. All other parts have been inventoried complete and includes decals and instructions.

Tamiya Renault Re-20 Turbo With Photoetched Parts, 1/12, 12033

Plastic Model Kit,   Box Condition: Sealed NM

Renault Re-20 Turbo With Photoetched Parts

$159   

Still factory sealed. Superb, large scale model that is completely detailed inside and out. Includes a large sheet of PE details.

Aeromaster Buffalos Over South East Asia Parts 1 - Brewster F2A Buffalo Decals, 1/48, 48-619

Other Materials,   Box Condition: Sealed

Buffalos Over South East Asia Parts 1 - Brewster F2A Buffalo Decals

$18   

Sale Pending
Email for availability

Still factory sealed. These decals are 'mint' condition and have always been stored in a climate controlled residence. Includes paint and markings guide. On this website are two articles that fully explain how to save or reproduce older decals; please read read these before using any older model kit or aftermarket decals. Because USPS passes all envelopes through a machine that bends them 180 deg, I will only ship decals in a box; so to save on shipping, order decals with model kits so they ship together.

Airfix Supermarine Spitfire Mk.I /Mk.Ia / Mk.IIa With Upgrade Wheels / Canopy / Decals - Mk.I RAF Duxford No.19(F) Squadron August 1938 / Mk.IIa RAF Ivesley No.118 Sq A Flight May 1941 / Mk1a No. 610 Sq No 13 Group RAF Biggen Hill July 1940, 1/48, A05115A

Plastic Model Kit,   Box Condition: Sealed NM

Supermarine Spitfire Mk.I /Mk.Ia / Mk.IIa With Upgrade Wheels / Canopy / Decals - Mk.I RAF Duxford No.19(F) Squadron August 1938 / Mk.IIa RAF Ivesley No.118 Sq A Flight May 1941 / Mk1a No. 610 Sq No 13 Group RAF Biggen Hill July 1940

$29   

Includes the following factory-sealed accessories: Squadron Crystal Clear Canopy #9533 Spitfire Mk.I/II, AeroMaster 148-009 Spitfire Stencils TWO sheets (instead of one) and markings guide and True Details 48018 Spitfire Mk.I-Mk.IX Resin Wheel Set (five spoike, smooth tread). The actual kit is still factory sealed and features 64 pieces, all fine recessed surface detail, very good cockpit, pilot figure, optional position cockpit door and canopy, enclosed and detailed landing gear bays, optional parts for MkI, Ia or MKIIa variants including canopy, separately molded trailing edge wing flaps and more. Includes a full paint guide and decals for the three aircraft listed. Never started. The parts are either still in the internal factory sealed bags or inventoried complete. Includes decals and instructions.

Airfix Avro Anson I, 1/72, 02009

Plastic Model Kit,   Box Condition: Sealed NM++

Avro Anson I

$30   

Sale Pending
Email for availability

Nicely detailed 1987 issue from the original 1960s molds. Features good interior and cockpit, crew members, rotating turret with elevating gun, moving ailerons, retractable landing gear, rotating wheels and propellers and more. Includes a full paint guide and decals. Never started and inventoried complete with all parts and includes decals and instructions.

Monogram Supermarine Mk IX Spitfire - Four Star Issue, 1/48, PA79-98

Plastic Model Kit,   Box Condition: Good+

Supermarine Mk IX Spitfire - Four Star Issue

$40   

Sale Pending
Email for availability

First issue hardbox dated 1962. This kit is part of a very famous World War II action kit line that Monogram issued in 1/48 scale during the 1960s. Very well molded and features Monogram's perfect fit and finish, retractable landing gear, pilot, four bladed propeller, 20mm cannon, belly tank and more. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. The decals are flat and 100% intact but NOTE: there is age micro-cracking. The box is only 'good++' because of big damage on the upper right corner as shown and age spotting on the four box sides.

Revell Flying Cloud with Sails - 'S' Issue, 1/232, H344-298

Plastic Model Kit,   Box Condition: Exc

Flying Cloud with Sails - 'S' Issue

$139   

This is one of the final 'S' kits and is dated 1960; the red and yellow "S" Cement logos are on all four side panels. Like most early Revell sailing ship models, the molds were cut by true craftsman and builds into a beautiful model. Features crisp details, excellent mold quality, full hull with simulated wood planking and copper plates below the waterline, one piece main deck, sail lockers, fife rails, cleats, capstans, windlass, fresh water barrels, detailed deck houses, bilge pump, cargo hatches, skylights, wheelhouse & wheel, ladders, rear railings, ship's boats & davits, figurehead, fore & aft catheads, anchors, three piece masts with separately molded crows nests and cross trees, separately molded yard arms & jibs, realistic deadeye & chainstay assemblies, Revell's famous pre-formed ratlines, vacuform billowing sails, rigging thread, rigging instructions and even a display stand. Inside, the kit has never been started. It has been inventoried 100% complete with all parts, decals, flags and instructions present. NOTE: one crow's nest deadeye (#77L) is black instead of tan. It is from a later issue of this same model kit. The box displays better than the 'excellent' grade but is rated as such because there is one closed split corner, light edge wear and some light scuffing on the sides.

Airfix Bristol Beaufighter TFX, 1/72, 02003

Plastic Model Kit,   Box Condition: Sealed NM++

Bristol Beaufighter TFX

$20   

Still factory sealed. Fourth logo issue from the early 2000s and with 55 pieces. Includes fine raised panel lines, recessed control surface outlines, crew figures, torpedo and missile load-outs and more.

Serial San Gabriele 1497 - High Speed Spanish Ship - 14 Inch Long Plank-On-Frame Wood and Metal Ship Kit, 1/200, 04036

Wood and Metal Model Kit,   Box Condition: Sealed Good+

San Gabriele 1497 - High Speed Spanish Ship - 14 Inch Long Plank-On-Frame Wood and Metal Ship Kit

$115   

Still factory sealed and rare. This 1/200 scale plank-on-frame kit is manufactured by Serial Modellbau of West Germany and most likely dates from the 1970s. The back of the box says "This model kit contains everything except glue - all marine fittings - nails - hardware - sails - wood parts and complete instructions are included." Wel designed and detailed model kit features full instructions in English, French, German, Italian and Spanish, superbly drawn full size plans with numerous with detail views, precut cloth sails, plywood bulkheads, keel and mast caps, numerous metal parts including brass cannons and mountings, lantern, hinges, lifeboat, anchors, chain, ladders (wood), wooden blocks & deadeyes and more, mahogany planking and other hardwood planking, wood stock as required, rigging thread, full rigging diagrams, precarved hardwood stand and more. Although no one know for certain, this high-quality line of craftsman ships probably appeared in the 1970s. Known kits from this series include Bluenose (1921), L'Ann Alexander (1836), Royal Yacht (1661), Armistad (1832), San Gabriel (1497) and Prince Neufchatel (1802). All kits are plank on frame construction.

Testors F8F-2 Bearcat With Five Upgrade Sets - US Navy Or Gulfhawk Al Williams - (F8F2), 1/48, 519

Plastic Model Kit,   Box Condition: Sealed Exc++

F8F-2 Bearcat With Five Upgrade Sets - US Navy Or Gulfhawk Al Williams - (F8F2)

$48   

Build the ultimate Hawk/Testors Bearcat with this kit and the following factory-sealed aftermarket sets: Eduard 48-108 F8F Bearcat PE & Film Instrument Detail Set (designed for this kit), Super Scale Decals 48-1008 Grumman F8F-2/2D Bearcats (mint condition, includes VMFAT-10, VF-83, VF-72 and Utility Sq 4), True Details 48076 F8F Wheel Set in high-definition resin, the matching True Detail s83176 Hub Masking Set (designed for these wheels) and a Squadron Crystal Clear Canopy #9521 in mint, never yellowed condition (includes two canopies). The actual kit is still factory sealed. 1992 issue from quality ex-Hawk molds. This kit is noteworthy for the large and beautiful set of decals for the 'Gulfhawk' Gulf Oil sponsored air-show aircraft flown by the famous Al William's. There were many Gulfhawks through the years, but perhaps two of the most famous were the F3F Biplane and the F8F Bearcat. Millions of spectators were amazed by Williams stunt routine.

Monogram Grumman Bearcat F8F - Blue Box Issue, 1/72, PA144-70

Plastic Model Kit,   Box Condition: Fair+++

Grumman Bearcat F8F - Blue Box Issue

$24   

First issue from 1967 of this quality model with Tom Morgan box artwork. Very nicely molded and detailed with pilot figure, 'good' cockpit, optional position canopy, drop tank, bomb and missile loadout, full landing gear and more. Molded in the correct US Navy Dark Blue and clear plastic. Never started. It has been inventoried complete with all parts and includes decals and instructions.

Monogram AD-6 Skyraider - (A-1H), 1/48, 5429

Plastic Model Kit,   Box Condition: Sealed Exc++

AD-6 Skyraider - (A-1H)

$39   

Still factory sealed and the 1983 issue. Features complete cockpit, detailed main and tail wheel wells, optional position canopy, a variety of load-out options, rotating propeller & wheels and more.

Monogram A-1H Skyraider - US Air Force, 1/48, 5454

Plastic Model Kit,   Box Condition: Sealed Exc++

A-1H Skyraider - US Air Force

$34   

Still factory sealed and dated 1990. Classic high Monogram quality kit which features complete cockpit, detailed main and tail wheel wells, optional position canopy, large weapons & drop tank loadout and much more.

Monogram Devastator TBD-1 With Diorama Instructions - VT-2 Lexington 1939 / VT-6 Enterprise 1939 / VT-8 Hornet 1941 / VT-6 Enterprise 1942, 1/48, 7575

Plastic Model Kit,   Box Condition: Fair+++

Devastator TBD-1 With Diorama Instructions - VT-2 Lexington 1939 / VT-6 Enterprise 1939 / VT-8 Hornet 1941 / VT-6 Enterprise 1942

$46   

1974 'tall box' first issue with the very desirable Diorama Instructions for Torpedo 8 at the Battle of Midway . This is avery highly detailed kit and much more accurate than the new GW model. Features complete interior, folding wings, elevating and rotating tail gun, rotating propeller and wheels, working arresting gear, optional position gun compartment doors & canopy, optional parts for bomber or torpedo versions and more. Includes markings for three aircraft including the yellow-winged pre-war versions and Torpedo 8 from the Battle of Midway. The kit has never been started. Inventoried 100% complete with all parts including decals and instructions.

Monogram Mazda RX-7, 1/24, 2257

Plastic Model Kit,   Box Condition: Sealed VG

Mazda RX-7

$38   

Still factory sealed and dated 1979. This excellent kit has the quality you would expect from Monogram. Features detailed rotary engine and engine compartment, opening hood, very good underside chassis/suspension detail, complete interior and more. Usually molded in red, clear and plated parts.

Execuform 1937 Lockheed Electra 10 - (Model 10) - Bagged, 1/72

Vacuform Model Kit,   Box Condition: Sealed

1937 Lockheed Electra 10 - (Model 10) - Bagged

$18   

Sale Pending
Email for availability

Still factory sealed. This basic vacuform kit includes white plastic vac main parts, detailed plans and instructions. A certain degree of modeling skill is required to build vacuform kits. They are not recommended for beginners.

Rareplane Douglas KA-3B / EA-3B / RA-3B Skywarrior - Injection Molded Struts and Decals, 1/72, RP6001

Vacuform Model Kit,   Box Condition: Good++

Douglas KA-3B / EA-3B / RA-3B Skywarrior - Injection Molded Struts and Decals

$28   

Sale Pending
Email for availability

Includes parts for all versions, so this makes a fine conversion kit if you wish to use the Hasegawa 1/72 Skywarrior as a base kit and the RA-3B parts from this model. This is a superb quality vacuform kit with moldings equal to or better than many injection molded models. Features very fine recessed and raised surface detail, recessed control surface outlines, complete cockpit with all crew stations, opened or closed speed brakes with detailed wells, clear canopy, fine cast metal nose and main landing gear struts, injection molded nose refueling probe, detailed main gear wells, clear vac canopy (in mint condition and not yellowed) and more. The instructions are a large, fold-out format and both sides are loaded with full text building instructions, exploded diagrams, detail drawings, reference list, multi-view insignia drawings, history and more. Never started. The small parts are still sealed in the factory bag; the parts that were never sealed have been inventoried complete. Includes all paperwork.

Maintrack North American F-107A - Bagged, 1/72, PX-021

Vaccuform Model Kit,   Box Condition: Sealed

North American F-107A - Bagged

$14   

Still factory sealed. This is a very high quality vacuform kit that features fine white vac moldings of higher quality than many injection molded kits, clear canopy, many cast metal details and full decals.