Plastic Model Kit, Box Condition: Exc
$240
Build the ultimate CV-10 with this 1/350 scale model and over $300 worth of aftermarket parts! Includes the following never used and factory sealed or inventoried complete & internally sealed upgrade sets: Pontos 35004F1 Detail Up Set, G-Factor GFM35025 Brass Propellers and Shapeways Island 1944-1945. The actual kit is very highly detailed and features 678 pieces, your choice of full hull or waterline build, hanger deck, three types of aircraft with folding wings, extensive decals and much more. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Resin Model Kit, Box Condition: Sealed NM
$225
Still factory sealed and very rare in this condition. Out of production and from 2005. The parts are beautifully cast in high definition resin. Features big 1/72 scale Jekyll/Hyde figure, wood grained floor base, two table tops with 8 legs, bookcase with three bottles and thre books, two test tube racks with 6 test tubes each, 1 mixing cup, 1 spilled cup, 1 large cup with liquid, 1 bowl, 1 large flask, 1 double boiler with hose, 7 assorted flasks & beakers and 1 small hose. This kit was inspired by the original Aurora Box Art and the master was sculpted by the famous Jeff Yagher.
Other Materials, Box Condition: Sealed
$15
Still factory sealed. These decals are 'mint' condition and have always been stored in a climate controlled residence. Includes paint and markings guide. On this website are two articles that fully explain how to save or reproduce older decals; please read read these before using any older model kit or aftermarket decals. Because USPS handles envelopes roughly, I will only ship decals in a box; so to save on shipping, order decals with model kits so they ship together.
Other Materials, Box Condition: Sealed
$12
Still factory sealed. These decals are 'mint' condition and have always been stored in a climate controlled residence. Includes the markings & paint guide sheet. On this website are two articles that fully explain how to save or reproduce older decals; please read read these before using any older model kit or aftermarket decals. Because USPS handles envelopes roughly, I will only ship decals in a box; so to save on shipping, order decals with model kits so they ship together.
Other Materials, Box Condition: Sealed
$10
Still factory sealed. These decals are 'mint' condition and have always been stored in a climate controlled residence. Includes paint and markings guide. On this website are two articles that fully explain how to save or reproduce older decals; please read read these before using any older model kit or aftermarket decals. To save on or eliminate shipping for decals, please order them with model kits or order enough of them to make boxing worth while. USPS clearly states that any flexible envelope will be bent 90 degrees or more in 2 inches, I cannot send decals in a flexible envelope. And any decal reinforced with cardboard will be greater than 1/4" thick, which USPS says must go as a normal box. There is no choice; because I will not send decals to their probable destruction, shipping in a box is the only option.
Plastic Model Kit, Box Condition: Sealed Exc++
$32
Still factory sealed. An excellent, all-new model from state-of-the-art molds. Well detailed inside and out with 121 pieces. Includes painting guide and decals for all 4 aircraft listed.
Other Materials, Box Condition: Sealed
$14
Still factory sealed. These decals are 'mint' condition and have always been stored in a climate controlled residence. Includes the markings & paint guide sheet. On this website are two articles that fully explain how to save or reproduce older decals; please read read these before using any older model kit or aftermarket decals. Because USPS handles envelopes roughly, I will only ship decals in a box; so to save on shipping, order decals with model kits so they ship together.
Plastic Model Kit, Box Condition: Sealed NM
$29
Still factory sealed with the box in investment-grade 'Near Mint' condition. 1973 release that is very nicely molded & detailed and from the original 1960s molds. This issue has the higher 1.75" box. Monogram first released the F4B-4, Goshawk and P-6E Hawk in the 1960s 'Blue Boxes' and also in a 'gift set' blue box containing all three kits. Being very good sellers, Monogram discontinued them through the 'White Box' era. But even with Monogram's demise, the story did not stop there. Accurate Miniatures gained access to the molds and reissued two of the three kits in a special boxing. Mark's Models/Starfighter Decals even makes special markings for these models even today.
Wood Model Kit, Box Condition: Good
$129
Very large kit for RC or built for static display. Flyline Models was a manufacturer out of Fairfax, Virginia USA. The models are known for their high quality. The kit contains full size detailed plans, instructions, engine cylinder materials, high quality printed balsa sheets, decals, hardware and more. The model has not been started. The parts are inventoried complete with all parts, decals and instructions.
Plastic Model Kit, Box Condition: Sealed Exc+++
$165
Still factory sealed and in a 'Excellent+++' box. The seal has two small splits and is missing a section on the left short side. The box certainly displays 'Near Mint+' but is graded lower because there is a small, short puncture near the bottom of the top long side. This is the rare 1960s issue retaining the same artwork as the 1956 issue. This kit has arguably the most dramatic and fanciful B-29 artwork from the 'Golden Era' of modeling. Responding to market information that boys wanted larger kits, Aurora introduced the B-26 followed by the B-29 and B-25, all of which sold well for many years. This is likely the 5th issue and the final one with the original artwork (I believe the 6th issue is the 'AURORA' logo issue with the red/orange sky). Note here that the rectangle 'Northern Lights' logo has been replaced with the Aurora sunburst oval logo, hence the yellow background.
Other Materials, Box Condition: Sealed
$10
Still factory sealed These decals are 'mint' condition and have always been stored in a climate controlled residence. Includes the markings & paint guide sheet. On this website are two articles that fully explain how to save or reproduce older decals; please read read these before using any older model kit or aftermarket decals. Because USPS handles envelopes roughly, I will only ship decals in a box; so to save on shipping, order decals with model kits so they ship together.
Plastic Model Kit, Box Condition: Sealed Exc++
$32
Still factory sealed. This 1992 release features 273 pieces, elevating guns, rotating turrets, interior, rotating props and wheels, movable control surfaces, optional position bomb bay doors, bomb bay detail and bombs, optional position undercarriage, accessories (tractor, bomb carts and bombs) as shown on box cover and more. Has markings for both aircraft listed. MG-K of 7th Sq served as a mine layer, bomber and one of the first units of the Pathfinder force, and EX-L of 199 Sq of No.3 Group which converted from Wellingtons in 1943 and performed bombing, mine laying and supply missions. In 1944 they flew with 100 Group on Radio Counter Measure (ECM) missions until 1945.
Other Materials, Box Condition: Sealed
$12
Still factory sealed. These decals are 'mint' condition and have always been stored in a climate controlled residence. Includes the markings & paint guide sheet. On this website are two articles that fully explain how to save or reproduce older decals; please read read these before using any older model kit or aftermarket decals. Because USPS handles envelopes roughly, I will only ship decals in a box; so to save on shipping, order decals with model kits so they ship together.
Plastic Model Kit, Box Condition: VG
$28
Two-piece box issue dated 1963, but this issue is probably 1964 due to the 50 cent price extension. Beautiful artwork by Brian Knight, who did many of the 1/72 single engine Revell aircraft. This issue has red left and right box ends. Never started. It has been inventoried complete with all parts and includes decals and instructions.
Wood Model Kit, Box Condition: Good++
$36
Made for rubber free flight, but easily converted to electric R/C with today's light and tiny servos and receivers. Flyline Models was a manufacturer out of Fairfax, Virginia USA. The models are known for their high quality. The kit contains full size detailed plans, instructions, high quality printed balsa sheets, pre-cut spars and stringers, decals, fully finished wheels and thrust button, washers, clear window material, hardware, covering tissue and excellent plans. The model has not been started. Inventoried 100% complete with all parts, decals and plans present.
Plastic Model Kit, Box Condition: Good+
$125
This rare model is a superb kit from all new molds. Features excellent detail inside and out, all fine recessed panel lines, photoetched details, excellent cockpit & gear wells and much more. Includes full color paint guide and decals sheets for different aircraft. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Wood and Plastic Model Kit, Box Condition: Sealed VG
$150
Still factory sealed and rare. This is NOS (New Old Stock) from a hobby shop that closed down in about 1994; you would be the first owner of this model. This very unique design has landing gear and is also an seaplane...or it can take off and land on snow! This model can do every maneuver that a conventional model can do except spin. It will also do one maneuver that conventional models do not do - a controlled vertical descent. Features full size plans, fully formed landing gear, die-cut balsa parts, premium quality hardwood and plywood parts, quality AAA grade balsa, complete hardware package, and more. The new and revised (for this issue) 36 page instruction manual has over 150 photos and illustrations that leaves nothing to chance. This model can ship via UPS Ground or you can eliminate the shipping charges completely and pick it up from me at my local Panera Bread Restaurant. NOTE: this kit came in a very sturdy and thick cardboard box. It will ship in that box wrapped in thick brown paper. If you wish for it to be placed inside another box, let me know in the 'comments' section of checkout but be aware that additional shipping charges will apply and an invoice will emailed to you for that.
Plastic Model Kit, Box Condition: Exc
$189
Includes factory-sealed Yahu #YMA3210 Mosquito Mk.VI Instrument Panel Set and Eduard #JX184 Mask Set designed for this kit. The actual kit is not only the finest Mossie model ever made but one of the finest model kits period. Includes the Export Version only clear engine cowling parts and the Reference Manual. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Other Materials, Box Condition: Sealed
$16
Still factory sealed. These decals are 'mint' condition and have always been stored in a climate controlled residence. Includes the markings & paint guide sheet. On this website are two articles that fully explain how to save or reproduce older decals; please read read these before using any older model kit or aftermarket decals. Because USPS handles envelopes roughly, I will only ship decals in a box; so to save on shipping, order decals with model kits so they ship together.
Other Materials, Box Condition: Sealed
$14
Still factory sealed. These decals are 'mint' condition and have always been stored in a climate controlled residence. Includes the markings & paint guide sheet. On this website are two articles that fully explain how to save or reproduce older decals; please read read these before using any older model kit or aftermarket decals. Because USPS handles envelopes roughly, I will only ship decals in a box; so to save on shipping, order decals with model kits so they ship together.
