Plastic Model Kit, Box Condition: VG+
$14
Well molded kit of this very successful 1930s light aircraft features full cockpit, optional parts and decals for two versions and more. Mplded in light green and clear plastic. Includes a large, comprehensive decal sheet. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. The RWD 5 was a Polish touring and sports plane. It was made famous by its transatlantic flight, being the smallest aircraft to cross the Atlantic. The first prototype (registration SP-AGJ) was flown on 7 August 1931 by its designer Jerzy Drzewiecki. It was built in new workshops of Warsaw University of Technology near Okęcie airport, from 1933 converted to Doświadczalne Warsztaty Lotnicze (DWL) company. After successes of the prototype in air competitions, a small-scale series production was set up, mostly for the Polish Aero Club. Series aircraft had improved landing gear. Two were built in 1932 (registration SP-AJA and AJB), five in 1933 (including the single-seater RWD 5bis), eleven in 1934 (including one in Aero Club workshops in Lublin) and one more in 1937 (SP-BGX), for a total of 20 aircraft. In 1932, the RWD 5 was shown at the International Air Show in Paris. One aircraft was used by LOT Polish Airlines in 1933–1936 for taxi flights (registration SP-LOT), one by LOPP organization (SP-LOP). After the outbreak of World War II, during the Polish September Campaign, at least three RWD 5 were utilized as liaison aircraft by the Polish Air Force (SP-ALR, ALX, ALZ). Also, Maj. E. Wyrwicki flew RWD 5 from Romania to besieged Warsaw[1] (according to other sources, he flew RWD-5 SP-AJB from Warsaw). The Flight Across The Atlantic: In March 1933 a special single-seater variant was built, called RWD 5bis (registration SP-AJU), powered with 130 hp Gipsy Major engine. The rear cabin was replaced with an additional 300 L (79 US gal) fuel tank, and the windows were removed. Additional fuel tanks were added in wings, the fuel capacity reached 752 L (199 US gal) in total and a range increased to 5,000 km (3,100 mi). Stanisław Skarzynski flew this plane from Warsaw to Rio de Janeiro from 27 April to 24 June 1933, on a path of 17,885 km (11,113 mi).During his travel, on 7 May/8 May, Skarzynski flew the RWD 5bis across the southern Atlantic, from Saint-Louis, Senegal to Maceio in Brazil. The flight took 20 hours 30 minutes (17 hours above the ocean). He crossed 3,582 km (2,226 mi), establishing a distance record in the FAI light tourist plane class. The RWD 5bis was at that time the smallest plane that has ever flown across the Atlantic — its empty weight was below 450 kg (1000 lb), loaded 1100 kg (2425 lb). The plane had no radio nor safety equipment, due to weight. It returned to Europe on a ship. After its record-breaking flight, the RWD 5bis was converted to a two-seater variant without additional tanks, and used by Skarzynski. The SP-AJU was seized by the Soviets in Lwów in September 1939, after their invasion on Poland.
Plastic Model Kit, Box Condition: Sealed
$14
Still factory sealed. This limited edition injection molded plastic model kit features very good moldings with fine recessed panel lines and full decals.
Plastic Model Kit, Box Condition: Good++
$30
Detailed kit of one of the first Advanced Early Warning radar aircraft for the Navy. Builds all three versions: Marines VMC-1 from the Korean War, British Royal Navy 849 Sq and US Navy VC-11 from the Korean War. US versions are from 1950 (Korean War) and Royal Navy version is Squadron 849, 1956. Features detailed interior, landing gear, wing mounted fuel tanks and 65 parts. The kit has never been started. Internal factory sealed bags including decals and instructions.
Plastic Model Kit, Box Condition: Exc
$24
1960s black-end Craftmaster issue with great boxart. Very nicely molded kit with no rivets and good cockpit detail. Never started. It has been inventoried complete with all parts and includes decals and instructions.
Plastic Model Kit, Box Condition: Exc
$28
Superb injection molded kit with plastic truck set. Very finely detailed with a high parts count for such a small model. While model aircraft mold makers and molding machine operators were claiming that you could not mold parts this fine, several model train companies, like E&B Valley, were busy proving them wrong. This is kit for the serious model railroader who demands prototype fidelity. Molded in black plastic. The kit has never been started. It has been inventoried complete with all parts and includes instructions. Please note that these E&B kits did not come with decals.
Vacuform Model Kit, Box Condition: Sealed
$8
Still factory sealed and rare. Older but nicely molded with recessed panel lines. Includes basic airframe parts molded in white, clear canopy (in great shape and not yellowed) and instructions/plans. Can be built as civil or military. A certain degree of modeling skill and scratch-building skills are required to build vacuform kits. They are not recommended for beginners.
Plastic Model Kit, Box Condition: Sealed
$24
Still factory sealed. Limited edition kit includes a very nice paint guide and decals for two Soviet and one Finnish Air Force versions.
Plastic Model Kit, Box Condition: Good+
$16
Early kit of this once-common two seat training jet. Features fine raised panel lines, clear canopy, full landing gear and Polish decals. The kit has never been started. The parts are either inventoried 100% complete or still in the internal factory sealed bag. Includes decals and instructions.
Plastic Model Kit, Box Condition: Good+
$16
Still factory bag sealed. Nicely molded and detailed model kit which includes large decal sheet for several Luftwaffe aircraft and civil aircraft from Switzerland, France and Germany.
Wood Model Kit, Box Condition: VG++
$78
Very well detailed large 1/16 kit from 1949. Features plastic wheels, lights, other accessories and wooden main parts and occasionally metal parts and cardstock. Although all of Hudson's 1/16 kits have excellent detail, this one has even more detail than usual thanks to Hudson's engineers having access to the actual car. This kit has never been started. It has been inventoried complete with all parts, plans and instructions. Hudson Miniatures created a very popular line of automobile kits in a constant 1/16 scale shortly after WWII. The kits sold very well...so well that you could argue that Gowland & Gowland borrowed Hudson's subject matter for their ground-breaking 'Highway Pioneers.' The Hudson Miniatures 'Old Timers' even spawned a line of imitators, with Fador's 'Smallster' being one of the better in quality. Sales did drop on the appearance and popularity of the much smaller (and less accurate) Gowland/Revell 'Highway Pioneers' in 1951. When the all-injection molded Gowland kits proved not to be a passing fad, Hudson quickly planned and released his own all-plastic, small-scale competition called 'Lil' Old Timers Quickie Kits.' The kits were of excellent quality, but it was too little too late. Additionally, sales of the excellent wooden kits faltered further in the next few years with the introduction of accurate, 1/24 and 1/32 all-plastic cars in the mid 1950s. This forced Hudson to discontinue the wood kits and the plastic line was sold to Revell and subsequently re-released. Today, these excellent, big 1/16 kits are often the only model available of these early automobiles. In the mid 1960s Aurora thought so highly of Hudson Miniatures that they purchased the wood kit assets and released a very small number of these in all-plastic models.
Plastic Model Kit, Box Condition: VG++
$22
Still factory sealed. Bagged kit with header. Very limited production injection molded kit. Details such as interior are not included in Beechnut kits but detailed drawings are provided. They contain all basic parts (canopy, wings, fuselage, engine, prop, elevator and rudder) but you must scratch build or use your spares box for the rest.
Resin Model Kit, Box Condition: VG+
$40
Rare. Very highly detailed resin cast kit with clear canopy. Decals and paint guide are included for both air forces. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions. The He-114 was a two-seat float plane designed in 1935 to replace the He-60 in the role of shipboard reconnaissance. A number of engines were tried in the prototypes and the design frozen by 1938 for production. Although somewhat dated by WWII standards, it did see action for about half the war. Before hostilities began, 12 were sold to Sweden.
Vaccuform Model Kit, Box Condition: VG+
$12
Includes many clear parts with front fuselage section and white parts with three different sets of engine nacelles and two sets of main gear wheels. With instructions. Never started. Complete with all uncut parts and instructions. Conversion kits require a base injection molded kit (not included) to complete. This is a basic conversion only - some scratchbuilding is required.
Wood Model Kit, Box Condition: Poor
$34
From the 1950s. This kit contains three small balsa gliders. All parts are die cut. Full size plans are included. These are magnificent fliers. The kits have never been started and are complete with all parts unpunched and plans.
Plastic Model Kit, Box Condition: Fair
$37
Excellent builder kit. Nicely molded, smaller scale full-hull kit. Kit features molded rat lines, detailed deck and fittings, display stand and rigging instructions. Molded in green, wood tan and black. The kit has never been started. Inventoried 100% complete with all parts including flag sheet and instructions. NOTE: the smallest yard has 1/3 of the tip broken off and that tip is missing.
Plastic Model Kit, Box Condition: Sealed Exc
$18
Still factory sealed. From the original early 1960s ITC molds and an excellent 'classic builder.'
Plastic Model Kit, Box Condition: Sealed Exc+
$20
Still factory sealed. Limited edition. Contains decals for all three aircraft. Very finely molded with all recessed panel lines, very good cockpit, engine and gear well detail as well as a centerline drop tank.
Resin Model Kit, Box Condition: NM
$34
Very rare big 1/96 scale model. It is molded in high-definition cast resin and includes numerous PE details. The kit has never been started. The parts are still in the internal factory sealed bags and includes instructions.
Wood and Metal Model Kit, Box Condition: VG
$39
Very high quality wood and metal kit from the Golden Age of HO Craftsman kit. Builds a very accurate and highly detailed prototype of the 42' box car. Kit features pre-cut and pre-scribed hardwood sides that are factory painted tuscan red and lettered, cut and pre-milled hardwood roof and floor, hardwood pre-cut and scribed car ends, wood and metal stock as required, metal ladders, and brake wheel, metal grab irons, brake details and more. The model has never been started. The small parts are still factory sealed and the other parts have been inventoried complete and includes full size plans/instructions. If you have an interest in these kits and the revolution they created in modeling, please read the article about their history located on this website. Please cut and paste this link in your browser to see it - http://www.oldmodelkits.com/blog/plastic-model-kit-history/the-ho-scale-model-railroading-revolution-of-the-1940s/
Plastic Model Kit, Box Condition: VG
$10
Completely injection molded kit, not vacuform. Nicely molded. The kit has never been started. Inventoried with all parts and instructions present. This is the first Focke-Wulf design that Kurt Tank was responsible for. Later he designed the famous and effective 190 series.
