Be the first to know when kits are listed!
Plastic Model Kit, Box Condition: Exc
$16
Very nicely molded kit with all fine recessed panel lines, good cockpit and intake detail, optional position speed brake, two piece, optional position canopy, AIM-9 Sidewinder, drop tanks or 30mm Aden gun pod and more. Never started. It has been inventoried complete with all parts and includes decals and instructions.
Plastic Model Kit, Box Condition: Exc++
$25
1965 early issue with no part number, very high-gloss box, wrap-around artwork and yellow-backed Heller logo. This sleek twin engine French bomber is well detailed for that time with full cockpit, crew stations, optional position landing gear and more. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions. Like most very early Heller kits, this one does not have a part number.
Plastic Model Kit, Box Condition: Exc
$24
This excellent, limited run injection molded kit was produced by Miroslav Nemecek in the Czech Republic. Very cleanly molded and well detailed model features all recessed panel lines, parts to build one of the three versions and has optional spinners, canopy or folded wings, full cockpit, detailed engine with removable cowl and more. Includes decals for aircraft stationed in Norway and for carrier trials for the aircraft carrier Graf Zeppelin. The kit has never been started. The parts are either still in the internal factory sealed bags or have been inventoried complete. Includes decals and instructions.
Plastic Model Kit, Box Condition: Sealed Exc
$36
Still factory sealed. Dated 1995 and with 118 pieces. Very highly detailed and superbly molded with all very fine recessed panel lines. Features very highly detailed cockpit and landing gear wells, under-wing load-outs, two piece canopy and extensive decals.
Plastic Model Kit, Box Condition: Good-
$39
Dated 1986 and nicely detailed for that time. Features complete engine with removable cowl, full cockpit, pilot figure, sliding canopy, optional position landing gear, detailed gear bays, rotating propeller & wheels and more. Includes a multi-view paint guide and decals for the aircraft on the box top. Never started. It has been inventoried complete with all parts and includes decals and instructions.
Plastic Model Kit, Box Condition: NM
$85
Rare 1972 Revell of Japan issue in amazing investment-grade 'Near Mint' condition. Japan issues usually have special features and this one is no exception and includes a greatly expanded decal sheet covering four aircraft: RAF Mustang II HBW, RAF PKG, USAAF P-51B Tail #2108950 and USAF F-6C Tail #2103205. Features detailed cockpit, landing gear, pilot figure and removable cowling to show Rolls Royce Merlin engine. Molded in a unique light chocolate brown and clear. The kit has never been started. Inventoried 100% complete including decals and instructions.
Plastic Model Kit, Box Condition: Good
$14
Nicely detailed model from the original FROG molds. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.
Plastic Model Kit, Box Condition: VG++
$24
'Yellow Box' issue dated 1965 but not the high-gloss version. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions. This excellent armed reconnaissance bomber that first flew in January of 1939. By the time of the German Invasion, only 50 had been made and only one unit operated the aircraft exclusively. The excellent performance allowed the existing 174s to be used extensively with little losses. After the Armistice, it continued to operate with the Vichy forces. Some saw action along side the Allies during TORCH in North Africa.
Plastic Model Kit, Box Condition: VG++
$16
Hard-to-find injection molded kit which Features high quality moldings, recessed panel lines and parts & decals for V1 and V4. Never started. Inventoried complete with all parts, decals and instructions present.
Plastic Model Kit, Box Condition: Exc
$24
Rare, historically significant injection molded model. Veeday was a British company that produced some of the earliest 'short run' injection molded kits. Production lasted from 1978 to 1982. In all, 16 kits were issued if you count the Cierva C30 RAF and the C30 civil issue as two kits. Less than 1000 of each kit was produced and all kits were boxed. Two bagged kits (Pfalz D.XII and Spitfire 24) were issued after Veeday ceased production by someone who purchased the left-over stock. This kit has never been started - all parts, decals and instructions have been inventoried complete.
Plastic Model Kit, Box Condition: VG++
$24
SALE!! Includes two builder kits, but please read carefully. Well molded float or land model with decals for three aircraft and parts for A-1 or B-2. NOTE: they have 'professional' quality subassembly as follows: Kit #1 fuselage halves with painted cockpit installed; prop assembly. Inventoried complete with all parts, decals and instructions present. Kit #2 same as kit #1 but with both main floats built also. Inventoried and NOTE: missing windshield and float skid (used only if you wish to use floats; not used on land based model). Includes all other parts, decals and instructions.
Plastic Model Kit, Box Condition: Good
$15
This 1960s issue with colorful artwork of a pilot and his instructor making a low pass at the airfield while another trainer maneuvers wildly to avoid a mid-air collision. This is a very nicely molded and detailed kit for that time and has RAF decals. Never started. Inventoried 100% complete with all parts, decals and instructions. NOTE: instructions are photocopies
Vacuform Model Kit, Box Condition: Good
$16
Basic vacuform kit with clear canopy. Nicely molded with recessed panel lines. Never started and complete. A certain degree of modeling skill is required to build vacuform kits. They are not recommended for beginners.
Plastic Model Kit, Box Condition: Exc+
$19
Three very nicely molded full-hull sub kits with full decals. Includes display stands. The kits have never been started. All parts are still in the internal factory sealed bags and includes decals and instructions.
Wood Model Kit, Box Condition: Good-
$22
Rare kit from 1942. This is a scale, solid wood kit. It features balsa wood, very thick and heavy printed cardstock parts, cardboard template, heavy cardstock props, full size plans with more templates and construction notes. A very simple kit that requires serious carving and shaping skills, but typical of the time! Complete and never started. The paint scheme shown on the aircraft is the pre-war variety. Marvel was a popular manufacture with a large line of army vehicles, tanks of all nations, aircraft and more.
Plastic Model Kit, Box Condition: NM
$18
From excellent, newer molds and features all fine recessed panel lines, 76 pieces, good cockpit detail, optional position canopy, pilot figure, boarding ladder, refueling probe, drop tanks, AIM-9L Sidewinders, 1000 lb bombs, Sea Eagle ASM, optional position air brake and more. With decals for all the aircraft listed. Never started. It has been inventoried complete with all parts and includes decals and instructions.
Plastic Model Kit, Box Condition: Good
$18
Features very good cockpit, opened or closed canopy, boarding ladder, centerline and wing drop tanks, air-to-air missiles and more. Includes markings and paint guide for two different aircraft. Never started. It has been inventoried complete with all parts and includes decals and instructions.
Plastic Model Kit, Box Condition: Exc+
$54
From the 1950s and with wonderful artwork. The hardbox is in 'excellent+' condition with great color and gloss. Molded in the correct gloss silver and clear with the early O-lin style two-piece, teardrop-based stand. The kit has not been started and is complete with all parts, decals and instructions. Paul Lindberg got his start in 1930s model aviation by designing, building and flying stick and tissue aircraft. His plans appeared in Popular Aviation magazine and he soon made a name for himself. When injection molding showed the way to increased kit sales in the late 1940s/early 1950s, he quickly teamed up with Mr. Olsen to create 'O-lin' models. Ray Gaedke was one the the early artists for O-lin, and he help pioneer dramatic and colorful box artwork. In the early 1950s Paul Lindberg was running the company and had the logo changed to his name. The first logo was circular, with 'Lindberg' in middle and 'Products' 'Incorporated' arched across the top and bottom. The second logo is the 'Yellow Square' that is on this kit. Ray Gadke continued his bold and colorful artwork for Lindberg and did this F-80C boxart as well.
Metal Model Kit, Box Condition: VG
$34
Rare, limited issue, very high quality cast metal kit. Has parts for either D-I or D-II variants. Includes full instructions. Never started. The parts are still in the factory sealed bag.
Vacuform Model Kit, Box Condition: Sealed
$10
Still factory sealed. Very high quality conversion kit. Finely molded vacuform parts with recessed panel lines. Includes full interior. Has metal detail parts parts (engine, wheels, prop, exhaust and more) and decals for four aces aircraft.