Plastic Model Kit, Box Condition: Exc
$110
First issue from 1958. Little John was a light-weight free-flight rocket that was highly mobile. It could be pulled on its launcher or transported by helicopter. Length was 12 feet long and the warhead was atomic. The Dart was a very early, five foot long wire-guided anti-tank missile with a solid propellant rocket motor. An optical rangefinder was used for guidance. Both models are well detailed. The Dart includes four missiles, one launcher, three stands, decals, one optical guidance unit and a crew of three. The Little John includes a detailed launcher with elevating rails, movable support legs, decals and crew of three. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. The box actually displays significantly better than the 'excellent' rating but is graded as such because there is a very small tear on the lower right corner on the short side and a small 1/2" x 1/4" tape tear on the lower long side.
Plastic Model Kit, Box Condition: VG
$105
Build the ultimate SR-71 in 1/72 scale with this Revell (actually ex Monogram) kit and $135 of aftermarket parts! Includes the following never used and factory sealed or inventoried complete aftermarket sets: Eduard 72257 PE Detail Sets, Eduard 72376 PE Set , Wolfpack WP72066 SR-1 Ejection Seats , Wolfpack WP72081 J58 Nozzle Set, Master Model AM-72-119 Pitot Tube, Metallic Details MDR 7219 Blackbird Landing Gears (w/Wheels) and Metallic Details MD 7207 PE Grids. The actual model is the 2017 release from quality Monogram molds. Features detailed cockpits, optional position canopies, detailed wheel wells, GTD-21 Drone and ground handling cart. Never started. It has been inventoried complete with all parts and includes decals and instructions.
Other Materials, Box Condition: VG
$14
These decals are 'mint' condition and have always been stored in a climate controlled residence. Includes paint and markings guide. On this website are two articles that fully explain how to save or reproduce older decals; please read read these before using any older model kit or aftermarket decals. Because USPS handles envelopes roughly, I will only ship decals in a box; so to save on shipping, order decals with model kits so they ship together.
Other Materials, Box Condition: Sealed
$14
Still factory sealed. These decals are 'mint' condition and have always been stored in a climate controlled residence. Includes paint and markings guide. On this website are two articles that fully explain how to save or reproduce older decals; please read read these before using any older model kit or aftermarket decals. To save on or eliminate shipping for decals, please order them with model kits or order enough of them to make boxing worth while. USPS clearly states that any flexible envelope will be bent 90 degrees or more in 2 inches, I cannot send decals in a flexible envelope. And any decal reinforced with cardboard will be greater than 1/4" thick, which USPS says must go as a normal box. There is no choice; because I will not send decals to their probable destruction, shipping in a box is the only option.
Other Materials, Box Condition: Sealed
$14
Still factory sealed. These decals are 'mint' condition and have always been stored in a climate controlled residence. Includes paint and markings guide. On this website are two articles that fully explain how to save or reproduce older decals; please read read these before using any older model kit or aftermarket decals. To save on or eliminate shipping for decals, please order them with model kits or order enough of them to make boxing worth while. USPS clearly states that any flexible envelope will be bent 90 degrees or more in 2 inches, I cannot send decals in a flexible envelope. And any decal reinforced with cardboard will be greater than 1/4" thick, which USPS says must go as a normal box. There is no choice; because I will not send decals to their probable destruction, shipping in a box is the only option.
Plastic Model Kit, Box Condition: Sealed Exc++
$64
Still factory sealed and a one-owner collection; you would be the 2nd owner. This is the 1968 issue of Hawk's popular 1/48 scale fully chrome-plated Thunderjet. Features realistic panel-to-panel plating variations, pilot figure, long range tanks, detailed landing gear and more. Includes a large, colorful decal sheet for the box top aircraft.
Plastic Model Kit, Box Condition: Sealed Exc+
$24
An excellent kit which features all fine recessed panel lines, very good cockpit & ejection seats, optional position boarding stair, opened or closed canopy, detailed gear bays, drop tanks, iron bombs, missiles and more. Includes large, multi-view, full color paint guides and extensive decals for both aircraft listed. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Plastic Model Kit, Box Condition: Sealed Exc
$38
Still factory sealed. About 6 inches long when built. From ex-Palmer molds. The Gatling Gun was invented by Richard Jordan Gatling in about 1862. The first version fired .58 caliber bullets. Later improvements led to .30 caliber bullets being fired by a hand crank from a gravity fed magazine. Firing rate was 400 round per minute. The hand cranked gun stayed in production until 1911 and was first used during the US Civil War at the siege of Petersburg, Virginia.
Plastic Model Kit, Box Condition: Sealed VG++
$59
Still factory sealed and the 1969 issue. This is a well molded kit of the early 'Stretch 8' and features fine raised panel lines, recessed control surfaces, optional position landing gear, movable wheels, fan jet engine pods and more. Includes an extensive United Airlines decal sheet that includes side stripes.
Plastic Model Kit, Box Condition: Exc
$365
Incredibly rare, 1950s NOS Topping F5D Skylancer model untouched in the original factory box. The buyer will be the first one to ever remove it from the box. Inside, all of the factory cardboard and tissue are still intact. The stand and aircraft were never displayed or used - I believe they were never even removed from the box. While never used, please note that these models never left the factory in 'flawless' condition. There were always minor paint flaws and minor molding flaws as they were mass-produced. Furthermore, the canopy, white plastic and decals inevitably have some yellowing, although this example is minimal. If there is any yellowing or age marks (usually brown mildew on the plastic), you can very easily remove this with Novus #2 Fine Scratch Remover. I have found it perfect for both cleaing and bringing back Topping plastic and decals back to super condition. Because the original Topping box adds significantly to the value, it will be carefully packed into another box for shipping. Shipping insurance is required.
Plastic Model Kit, Box Condition: Exc
$145
Build the ultimate M3A3 with both of these Meng kits and over $200 worth of aftermarket parts! These sets are never started and are either factory sealed (inside or outside) or inventoried complete: Voyager Model PE35724 Basic Detailing Set, Voyager Model PE35725 Detail Up Set, E.T. Models E35-224 PE Set, Orange Hobby G35-106-48 25mm M242 Bushmaster Brass Barrel Set, SKP Model SKP 137 M2 Bradley Lights & Reflectors, SKP Model SKP 279 M2 Bradley Lenses & Tailights, Orochi Hobby PF-004 Upgrade Kit: Metal Tracks, Gun Barrel, Drive Sprockets, Quick Wheel QW-151 Wheel Mask and Legend LF3D006 TOW Anti-Tank Missile Vehicle Rack 6pcs w/Accessories. The actual kit includes the Bradley w/BUSK III and the Interior Set designed specifically for that kit. Both are incredibly well detailed model; there are many excellent on-line reviews of it that do it justice. Both models have not been started. All of the parts are still in the internal factory sealed bags and includes decals and instructions.
Plastic Model Kit, Box Condition: Exc+
$124
Very large 1/16 scale model from all new molds. Very highly detailed model with main injection molded parts, individual T-51 track links, metal barrel, working suspension and much, much more. Includes paint guide and markings for 6 different tanks. One full figure is included. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Other Materials, Box Condition: Sealed
$18
Still factory sealed and includes both parts, #48-758 and #48-765. These decals are 'mint' condition and have always been stored in a climate controlled residence. Includes paint and markings guide. On this website are two articles that fully explain how to save or reproduce older decals; please read read these before using any older model kit or aftermarket decals. Because USPS handles envelopes roughly, I will only ship decals in a box; so to save on shipping, order decals with model kits so they ship together.
Plastic Model Kit, Box Condition: Sealed Exc+++
$44
Includes the factory-sealed Reheat Models #RH097 F-86 Sabre Detail Kit designed for this Monogram kit. Features a fret of approximately 48 pieces for a super-detailed cockpit and other external features as well. The actual kit is still factory sealed and dated 1983. This is a very well molded and detailed kit of this famous Korean War fighter. Features full cockpit, opened or closed canopy, detail gear wells, detailed machine gun bay with optional position access panel, hinged flaps, standing pilot figure, opened or closed speed brakes with well detail and more. There are decals for both aircraft listed.
Other Materials, Box Condition: Sealed
$14
Still factory sealed. These decals are 'mint' condition and have always been stored in a climate controlled residence. Includes paint and markings guide. On this website are two articles that fully explain how to save or reproduce older decals; please read read these before using any older model kit or aftermarket decals. To save on or eliminate shipping for decals, please order them with model kits or order enough of them to make boxing worth while. USPS clearly states that any flexible envelope will be bent 90 degrees or more in 2 inches, I cannot send decals in a flexible envelope. And any decal reinforced with cardboard will be greater than 1/4" thick, which USPS says must go as a normal box. There is no choice; because I will not send decals to their probable destruction, shipping in a box is the only option.
Plastic Model Kit, Box Condition: VG++
$59
1961 hardbox version with the "USAF Pilot Wings" logo and the Famous Artists/Aircraft framable artwork and box top layout. This is a reissue of the original 'S' kit from 1958. Features optional position landing gear, movable wheels, four bombs, pilot figure and hinged cockpit canopy and refueling probe. Never started and inventoried complete with all parts and includes decals and instructions.
Plastic Model Kit, Box Condition: Sealed Mint
$125
Still factory sealed and rare in this condition. It is in amazing, investment-grade 'mint' condition which means it is in the same condition that it was when it left the assembly line. The model is dated 1961 but from the style of the logox it's from around 1963/64. The seal is still mint. The hardbox is in fantastic condition with like-new color and gloss. Features movable control surfaces, nice engine and cockpit, two figures, full engine, moving arresting hook and more.
Plastic Model Kit, Box Condition: Good++
$115
Rare original hardbox issue from 1958. This kit builds a custom Montclair with numerous options. Features the Mercury model with a detailed engine, removable hood, detailed engine compartment, full interior, separately molded suspension and molded in underside detail. It is molded in a dramatic glossy deep purple plastic and chrome plate. The accessories include wild custom decals, custom grille, 2 fender fins, wheel disc bullets, filler plugs, 2 piece club pin, custom decals with flames or pencil lines and white stripes, white wall decals, rear view mirrors, antennas, spotlights, continental kit, hood scoop, top rear scoop, two side stacks and more The kit has never been started. Inventoried and 100% complete with all parts, both sheets of decals, clear material for windows and instructions.
Plastic Model Kit, Box Condition: Sealed NM
$32
Still factory sealed. Big 1/48 scale and well detailed from newer molds. Features all fine recessed panel lines, highly detailed cockpit, optional position canopy, optional parts for all three aircraft, opened or closed bomb bay doors, very well detailed landing gear and full decals and painting guide for the three aircraft listed.
Plastic Model Kit, Box Condition: Sealed NM
$32
Includes a factory-sealed, superb Airwaves #AC72143 Whirlwind Fighter Brass PE Set with just about a complete cockpit tub (all but the seat) and much more. The actual kit is still factory sealed and from 1978. 112 Whirlwinds were built after the prototype flew in October of 1938. Two Squadrons flew the single seat fighter bomber on anti-shipping strikes and long range escort duties.
