Be the first to know when kits are listed!
Wood Model Kit, Box Condition: Good
$25
From the 1940s and measures 7.75 inches long when assembled. This is a very nice and prefabricated wooden kit featuring all cut out parts, fully formed wheels including spare tire, completely finished interior seats, numerous other parts cut to shape, metal detail parts and more. The kit has never been started. It has been inventoried complete with all parts and includes full multi-view plans with construction notes and additional drawings to aid assembly. RedYCut was well known for their wooden kits with a high degree of precise prefabrication. The model line was quite large and this list includes just a few of them: Sport Jeep, US Amphibian Jeep, Speed Boat With Trailer, Station Wagon, US Army Jeep, US Army Trailer, Motorcycle, US Army Tank Gun, Midget Racer and Midget Racer plus transport trailer.
Plastic Model Kit, Box Condition: Exc++
$26
A superb kit with all finely recessed panel detail. Features full cockpit, detailed gear wells, optional position canopy, 600 and 370 gallon drop tanks, AIM-9B Sidewinders and decals for three aircraft. NOTE: this kit has very minor, 'professional' quality subassembly as follows: Bulkhead glued to cockpit floor. There is no other assembly. Inventoried 100% complete and includes decals and instructions.
Plastic Model Kit, Box Condition: Good
$46
Highly detailed and finely molded with all recessed panel lines. Features decals for 3 aircraft, detailed ejection seats and cockpit, detailed air inlets/compressor fans, optional position air brake, two piece canopy, folded or unfolded wings, detailed gear wells, optional slipper tanks, Sea Eagle Missiles, AN/ALQ 101, AN/ALQ 23E, AIM-9 Sidewinder missiles and more. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.
Plastic Model Kit, Box Condition: Exc
$46
Rare limited issue dated 2005 that is widely considered the finest 1/72 Lancaster ever made. Features 191 pieces and exceptional detail. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.
Vaccuform Model Kit, Box Condition: VG
$62
This big 1/32 scale Super Sabre features 419 pieces, finely moldings with all recessed detail, separating rear fuselage section with dolly, super-detailed engine which even includes internal compressor and turbine stages with PE blades, excellent cockpit and gear wells, well-designed intake and exhaust, optional position canopy and speed brakes, separately molded leading edge slats, wing flaps, ailerons and rudder, crew boarding ladder, drop tanks, AIM-9 Sidewinders and a color paint guide & decals for multiple aircraft. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Plastic Model Kit, Box Condition: Exc
$59
Very finely molded and detailed & widely considered the finest injection molded 1/48 scale F-4 kit. Never started and inventoried complete with all parts and includes decals and instructions.
Plastic Model Kit, Box Condition: VG+
$34
From 2007 and from the original 1960s molds. Kit features raised and recessed details and panel lines, optional position rear boarding ramp and full landing gear detail. Includes decals for both airlines. Never started and inventoried complete with all parts and includes decals and instructions.
Plastic Model Kit, Box Condition: VG++
$32
This kit is dated 2001 and is very well molded with 101 parts, all fine recessed panel lines, excellent cockpit, optional closed or open canopy, optional bomb load and decals with paint guide for two aircraft. The kit has never been started. The kit is either still in in the internal factory sealed bag or has been inventoried complete with all parts and includes decals and instructions.
Plastic Model Kit, Box Condition: Good-
$20
Very finely molded earlier Fujimi kit. Features decals for VA-145 US Navy and the very colorful red and gray Marine AES-12 as well as a very nice full color painting guide. Includes extensive underwing weapons. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Plastic Model Kit, Box Condition: Exc
$52
Big-scale, limited edition featuring fine recessed panel lines, superb cockpit and engine, numerous resin and many photoetched parts, optional belly tank and decals for 4 aircraft. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Plastic Model Kit, Box Condition: Exc++
$26
Very nicely molded with optional landing gear or floats, detailed engine, cockpit and full passenger interior detail, two different access ladders and more. Includes decals for four different aircraft from three different countries. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions. The F-13 was the first all metal civil transport aircraft in the world and a major milestone in aviation.
Plastic Model Kit, Box Condition: Good
$48
Rare early issue of the Prototype Skyhawk from the mid 1950s. This is the smallest box that anyone has dared place a 1/48 scale A-4 in and the classic box art is by Ray Gaedeck Box. For some reason, this issue is rarer than the other Lindberg kits of that time. This model represents the very early Skyhawk, which is no surprise; Lindberg, like Aurora, often tried to be 'first to market' and did not hesitate to use prototypes for kits. Features detailed jet engine, opening inspection panel, pilot and ejection seat, opening canopy, full landing gear, centerline drop tank, wing rockets and display stand. Never started and inventoried 100% complete with all parts, decals and instructions. The box is graded 'good' because you can see the remains of tape right down the center, just foward of the cockpit.
Plastic Model Kit, Box Condition: Good
$68
Very well detailed smaller scale model that measures 11 inches long when assembled. From the quality and detail it looks like a reduced size version of either the large Revell or Pyro models. Never started. Inventoried complete with all parts, flags and instructions present. NOTE: there is some confusion about the scale of this kit, which is why I listed it as being about 11 inches long when built. The box lists 1/384 scale while it measures more of 1/310 scale.
Wood Model Kit, Box Condition: Good++
$22
Maircraft was originally founded in the early or mid 1930s by Gordon Christoph and went by the name Aircraft Model Company. The company produced a typical line of solid 'profile cut' kits that required the usual high talent levels for carving and finishing. A former Comet Model Airplane & Supply Co. salesman, Jack Mair, bought the company in the early 1940s and renamed it Maircraft. This company was one of the handful of solid kit producers who issued models in a consistent 1/48 scale during the 1930s and 1940s (others included Hawk and Dyna-Model). This lead to one of the most desirable and rare model kits ever produced in the USA - the wood/plastic 1/48 United DC-3 model issued immediately after World War 2. Other than the P-61 and a few other Maircraft offerings, most were simple kits that sold for the low price of about 35 cents and gave the owners many hours of pleasurable work. This kit features a full size 3-view plans with instructions steps and templates, 2D cut fuselage and wings, other wooden parts, and a factory sealed envelope of small parts. Never started. It has been inventoried complete with all parts and includes instructions.
Wood Model Kit, Box Condition: Sealed Exc To Good
$39
SALE!! Includes all five flying models. The two bagged AMA Cubs and the one AMA Racer are still factory sealed. One boxed AMA Cub is still factory sealed; the other one is opened, never started and inventoried complete with all parts and paperwork present.
Plastic Model Kit, Box Condition: VG
$27
Limited issue dated 1990. This kit is from new molds and features fine recessed panel lines, very nicely detailed cockpit and gear wells, optional position canopy, four drop tanks, external weapons including AIM-7 and AIM-9 AA missiles and a very large, colorful decal sheet for the three aircraft listed. Never started and inventoried complete with all parts and includes decals and instructions.
Plastic Model Kit, Box Condition: Exc
$30
Very well detailed featuring complete cockpit, detailed engine and gear wells, drop tank, optional position canopy and more. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Vaccuform Model Kit, Box Condition: VG
$54
Very rare kit from the mid 1940s. This is a large (6.5 inch fuselage with a 13 inch rotor span) model of this unique 1944 craft. Features profile (2D) cut fuselage, hardwood rotor blades, factory cut rotor mount, wood stock as required, an envelope of small parts. Includes excellent full size plans with templates, detail drawings, window patterns, construction tips and history. Never started and complete. Randles was another name for Ranco and may have simply been the deluxe version of the Ranco kits as they shared the same address. Just a few of those kits include the B-29, Cessna Bobcat, Sikorsky Helicopter and Kellett Auto Giro. There is evidence that they made boat kits also.
Plastic Model Kit, Box Condition: Exc++
$68
Rare model from 1997. Very highly detailed Betty from new molds; this is not the older Hasegawa Betty kit. Features 163 pieces, all fine recessed panel lines, excellent interior and cockpit & crew station detail, optional position bomb bay doors, detailed bomb bay with either bomb or torpedo loads and more. Includes paint guide and decals for the two aircraft listed. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.
Plastic Model Kit, Box Condition: NM
$52
Rare, high-definition resin complete kit of the truck commonly seen in the areas listed. Never started. The parts are still in the internal factory sealed bags and includes instructions.