Plastic Model Kit, Box Condition: Exc++
$38
1965 Pyro issue from original molds. In the early to mid 1960s the Pyro company chose many of it's kit subjects based more on historical significance than popularity. Luckily for us, Pyro not only made these kits but did an excellent job for the time. The Pyro car models are based on the actual cars that Pyro engineers and designers had access to. The model includes real rubber tires, chrome plated, colored and clear parts. Features detailed chassis with suspension, steering linkage and gas tank, spoked wheels, detailed engine, removable hood, full interior and dual rear mount spare tires. The kit has never been started. Inventoried 100% complete including instructions.
Plastic Model Kit, Box Condition: Exc++
$32
NOS (new old stock) from the contents of a R/C-only hobby shop that closed in about 2003. Includes high quality, brand-new & never used wooden propellers of the size and quantity listed. Please note that the package you receive may or may not have the yellow header. I have duplicates of some props and some are missing the header.
Plastic Model Kit, Box Condition: Exc++
$36
NOS (new old stock) from the contents of a R/C-only hobby shop that closed in about 2003. Includes high quality, brand-new & never used wooden propellers of the size and quantity listed.
Plastic Model Kit, Box Condition: Sealed Exc
$95
Still factory sealed. Hard-to-find and from original Frog molds. One of the very early British Prop-jet airliners, Heralds carried 56 passengers or 6.5 tons of freight at a range of 1000 miles and a cruising speed of 275 mph. This kit features separately molded rudder, ailerons and elevators, two position passenger and cargo doors, rotating propeller & wheels, seated and standing pilots and more. Includes two very colorful decal sheets and painting guide for both aircraft.
Plastic Model Kit, Box Condition: Exc
$22
Pit Road/Skywave issue. Very highly detailed and finely molded waterline model that can be built as any of the destroyers listed because it includes decals for all ships listed - hull numbers and stern names as well. This model includes a helicopter hanger bay with an optional position door and a detailed SH-60J. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Plastic Model Kit, Box Condition: Exc
$64
Very high quality and highly detailed model inside and out. Never started. Most parts are still in the factory sealed bags. One bag has been opened, and the parts inside that bag have been inventoried complete. With decals and instructions.
Plastic Model Kit, Box Condition: Exc
$32
NOS (new old stock) from the contents of a R/C-only hobby shop that closed in about 2003. Includes high quality, brand-new & never used wooden propellers of the size and quantity listed. Please note that the package you receive may or may not have the yellow header. I have duplicates of some props and some are missing the header.
Plastic Model Kit, Box Condition: Exc
$38
Very highly detailed with full interior and optional position bomb bay doors with full interior and bomb load. Includes paint guide and markings for three aircraft. Never started and inventoried complete with all parts and includes decals and instructions. Please note that part F5, a small triangle (one of 4) to mount the torpedo on the bomb bay is broken, but all parts are present so you can repair it. Not used if the bomb bay is modeled closed.
Plastic Model Kit, Box Condition: VG
$34
Revell of Great Britain 1960s Academy release with great box art unique to this issue. Kit features optional position landing gear and cockpit hatch, boarding ladder and standing pilot. Never started and inventoried 100% complete with all parts and includes decals and instructions.
Plastic Model Kit, Box Condition: VG
$38
Hard-to-find, out of production kit dated 2020. This finely molded model features 91 pieces. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.
Plastic Model Kit, Box Condition: Exc
$95
1961 issue in an 'excellent' grade box. Done in a big 1/16 scale, this kit and the other 'Old Timers' in the series represented a significant leap forward in quality for Aurora. It features full suspension, transaxle and driveline detail, rolling chassis build up like the real car, full exhaust, detailed interior and more. Molded in gloss ivory, gloss black, clear and with chrome plated parts and real rubber tires. The kit has never been started. The black parts that were factory sealed are still in the sealed bag. The ivory and clear parts were never factory sealed have been inventoried complete including decals and instructions. Aurora was renowned for turning a profit and for keeping expenses down. In researching new kit subjects, they came upon a forgotten jewel - the Hudson Miniatures line of 1/16 scale wooden kits. Hudson had discontinued this line due to lack of sales of wooden kits. But the Hudson models were second to none in quality, research and documentation. Aurora was quick to realize this and used the research and layout from these kits to create the subjects for this 'Old Timers' series. It is fortunate for us that they did, because in most cases this is the only injection molded kit of these rare and classic early automobiles.
Plastic Model Kit, Box Condition: Good
$29
Rare 1976 Revell Japan hardbox issue with unique box art. This fine model features all parts and markings to make P1Y1, P1Y1a, P1Y2 and PI2-S variants, full interior detail, complete twin-row engines, optional position landing gear, open or closed bomb bay with different bomb or torpedo loads and more. NOTE: this kit has minor, 'professional' quality subassembly as follows: upper floor, seats and instrument panels to the main floor. There is no other assembly. Inventoried and NOTE: missing (1) #17 propeller retainer; does not show when assembled and very easy to fabricate from flat plastic. Includes all other parts, 'near mint' condition decals and instructions.
Plastic Model Kit, Box Condition: VG
$38
Very nicely detailed model from 1986. Includes Commercial Passenger, Cargo or Executive full interiors, optional position entry and cargo doors and rotating props. Includes Philippine Navy and rare Air Liberia decals. The kit has never been started. Inventoried 100% complete including decals and instructions.
Plastic Model Kit, Box Condition: VG
$22
NOS (new old stock) from the contents of a R/C-only hobby shop that closed in about 2003. Includes high quality, brand-new & never used wooden propellers of the size and quantity listed. Please note that the package you receive may or may not have the yellow header. I have duplicates of some props and some are missing the header.
Plastic Model Kit, Box Condition: Exc+
$34
Highly detailed model of the Ju-88C-6 Night Fighter featuring 220 pieces, PE detail parts, excellent cockpit, correct nacelles with flame dampeners, separately molded ailerons and more. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.
Plastic Model Kit, Box Condition: Good+
$40
Original Renwal release from the early 1960s. This was an excellent kit for that time featuring three removable missiles, a detailed launch trailer that elevates and rotates the missiles, complete radar trailer with rotating and tilting radar housings and more. Includes a crew of four and full decals. The kit has not been started. The missiles are still sealed in the factory bag. The launcher and radar trailer were never factory sealed, and they have been inventoried complete including decals and instructions.
Wood Model Kit, Box Condition: Good+
$75
This is a Cleveland scale flying model in the agreed museum scale of 1/16. All Cleveland kits were exceptionally complete for the time and this one is no exception. Features very high quality balsa printwood and strip wood, covering material, highest quality plans, all parts required for assembly and much more. The model has not been started. Inventoried 100% complete with all parts and instructions. The Cleveland Model and Supply Company played a pivotal role in the development of true scale models. In 1909 Bleriot's English Channel flight caused a surge in aviation and model aircraft around the globe. Several companies were ideally positioned to take advantage of the aviation craze. In the USA, Wading River Manufacturing Co. (1909), White Aeroplane (1911), Ideal Model Aeroplane (1911), Broadfield Model Aeroplanes (1919) were among these pioneers, offering everything from plans and parts to complete kits and ARF models. Lindbergh's 1927 crossing of the Atlantic Ocean caused an even bigger world-wide phenomenon called 'The Aviation Craze' that extended up to the start of World War II. Many companies such as Megow, Guillow's and others started right around the time of Lindbergh's flight. Some of these models flew and flew well, but they all had one thing in common - were generally not accurate scale representations. In 1929, a youngster named Ed Packard had a very advanced dream to produce incredibly accurate, true scale models that flew perfectly. This radical idea established the world's longest operating single-owner model airplane supply business, called Cleveland Model and Supply Company. To this day, Cleveland models are treasured as the most accurate flying scale models produced. The fact that Mr. Packard started and successfully grew this business during The Great Depression is a testament to his ideals and business skill. I highly suggest the excellent book called 'Aviations great Recruiter, Cleveland's Ed Packard' by H.L. (Herm) Schreiner. It is an excellent history of the man, his company and the times of the Golden Age of Model Aviation.
Plastic Model Kit, Box Condition: Exc++++
$1200
Very rare kit from 1960 in exceptional condition. The box is superb with factory gloss and color, four solid corners, no price tags, factory tape marks only with no tape tears or any litho tears. It is free of creases and 'dishing.' The only wear is a very small amount of corner and edge wear and light scuffs. The box bottom tray is exceptional as well. Very interesting kit with raised and recessed panel line detail. The kit comes with the proposed operating zero-length launching system and fall-away rocket booster. The booster is detachable from the F-108 (if you wish). The aircraft has moving canards and the launcher elevates to launching position then back to storage position. Molded in the correct ivory plastic with metal parts for the elevation mechanism. The kit includes the correct decals and instructions as well. The decals, spring and two metal shafts are still packed in the ITC factory bag. The instructions are excellent with typical yellowing, factory folds only and no tears or edge wear. Inside, the kit is in factory-new condition. It has not been started. It has been inventoried complete with every plastic part, metal part, decals and instructions and even the Ideal Quality 'Inspection Slip.' The F-108 was a proposed interceptor and escort for the B-70 tri-sonic bomber and ITC was quick to capitalize on this new design. The kit was produced quickly and the rest is history. When the F-108 hit the shelves, it did not look like the design. Photos had been released by the US Air Force of the mock-up that were not available when ITC made the molds. This and the cancellation of the F-108 program lead to a very short release life for the Rapier and ITC quickly pulled it from the shelves. NOTE: shipping insurance is required.
Plastic Model Kit, Box Condition: Good+
$26
This is the two piece box issue dated 1962 and with framable artwork. Never started and inventoried complete with all parts and includes decals and instructions.
Metal Model Kit, Box Condition: Sealed
$28
NOS - New Old Stock and still factory sealed. These are from a RC-only hobby shop that closed in about 2003. Includes all items shown: (2) 21003008, 21004005, 21082003, 21081203 and (5) 21081307 Mounting Screw Sets.