Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Entex Dornier Do-X 1929 Flying Boat - (DoX) - (ex Otaki), 1/144, 8516

Plastic Model Kit,   Box Condition: Sealed Exc

Sold   

Still factory sealed but the seal has minor splits. 1970s issue from high quality Otaki molds. Famous German Flying Boat built in 1929. Dornier dreamed that this huge aircraft would become a trans-oceanic airliner with passengers traveling in ocean liner-like luxury. A tour of South and North American was conducted, but orders never materialized due to excessive fuel consumption and a lack of power. Total load was 170 passengers and crew, and the 12 engines developed 7200 HP. Former Otaki molds with over 110 parts, and a 13 inch wingspan.

Revell HMS Campbeltown Destroyer - From St. Nazaire Operation Chariot, 1/240, 85-3016

Plastic Model Kit,   Box Condition: Sealed Exc+

Sold   

Still factory sealed. 2010 reissue of this large-scale and nicely detailed kit of the historic four-pipe destroyer. Full hull model has 128 parts, full propeller and rudder detail, complete superstructure and deck fittings, decals and more. On March 8, 1942, the Campbeltown sailed up the Loire River. Her mission was to destroy the Normandie Drydock, a possible haven for the Tirpitz which was holed up on Norway at this time. The Campbeltown was disguised as a German warship and the bow was packed with 8500 lbs of high explosive depth charges. Under a RAF diversion, Campbeltown fought her way up the river and rammed the dock doors at full speed. Charges at the stern sank the back of the ship and she was wedged in the dock. During a German inspection 8 hours later, the charges went off, scattering parts of the ship up to one mile away. The dock was rendered useless to the Tirpitz, who now had to stay in Norway.

Model Airways Sopwith Camel F1 - Skeleton Kit, 1/16, MA1030

Plastic Model Kit,   Box Condition: VG++

Sold   

Amazing model builds a skeletal Camel with over 220 laser cut hardwood (basswood and plywood) parts, over 200 cast Britannia metal, copper, aluminum, steel, brass and rubber parts and over 70 Britannia metal castings for the Clerget engine alone. It is a model in itself and is complete with all cylinders, distributor, magneto and crankcase. Other details include turnbuckles, guy wires, compression bar, pulleys, wire support brackets, struts, flight instruments, tires and much more. Includes several sheets of full size plans and very detailed instructions. Completed wingspan is 21 inches. Never started. All parts are still in the factory sealed bags and containers. Includes all plans and instructions. Please note that shipping insurance is required for this kit.

Hasegawa F4U-7 Corsair French Navy, 1/48, JT77

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Still factory sealed. Dated 2000. From new, high quality molds featuring 133 pieces, all very fine recessed panel lines, detailed cockpit, optional position canopy, detailed gear wells and inside gear doors, optional position flaps and extensive weapons load and more.

Hobby Craft De Havilland DHC-3 Otter - USAF Arctic Supply or RCAF 411 Sq. CRB Downsview, 1/72, HC1396

Plastic Model Kit,   Box Condition: Exc

Sold   

Features all fine recessed panel lines, clear side and cockpit windows, good cockpit detail, floor for cargo/passenger compartment, optional skis or wheels and more. Includes decals for both air forces. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Airfix Boeing 737 Lufthansa, 1/144, SK505

Plastic Model Kit,   Box Condition: VG

Sold   

1960s Type Three logo issue with Lufthansa markings. Nicely molded and detailed with fine raised panel lines and recessed control surface lines. Features separately molded passenger and baggage doors and optional position landing gear. Molded in silver and clear. The kit has never been started. Inventoried 100% complete including decals and instructions.

AMT EC-135C Looking Glass Airborne Command Post, 1/72, 8955

Plastic Model Kit,   Box Condition: Exc

Sold   

Large model that is well molded and detailed and the only 1/72 scale Looking Glass kit ever made. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Monogram F-86 SabreJet and Mig-15 Air Combat Series, 1/48, 6049

Plastic Model Kit,   Box Condition: Sealed VG++

Sold   

Still factory sealed. Dated 1987 and contains both nicely molded and detailed kits.

Revell PT-109 John F. Kennedy - (PT Boat), 1/72, 85-0310

Plastic Model Kit,   Box Condition: Good+

Sold   

2004 issue from original 1960s molds. Large 1/72 scale model of Lt.(jg) John F. Kennedy's historical ship. Well detailed for that time and measures just over 13 inches long when assembled. Features 4 torpedo tubes, 2 twin .50 caliber machine guns, 20mm cannon, life raft, 4 crew figures, rudder and prop detail and more. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Aeropiccola Susanna II Fishing Trawler With Fittings - 24.8 Inches Long For R/C Or Display, 1/34, 606SM

Wood and Metal Model Kit,   Box Condition: Exc++

Sold   

A superbly detailed, full scale plank-on-frame model. Features accurately die-cut plywood frames/bulkheads, deck and more, numerous other hardwood and plywood die-cut parts for the superstructure, etc., molded composite wood stern, limewood planking, complete set of metal and wood fittings, instructions, plans and more. Never started. The kit is exactly as it was shipped from the factory. The items that were bag sealed are still sealed. The ones that were never sealed have been inventoried complete.

Flyline Models Earl Stahls Howard - 24.5 inch Wingspan for Rubber Free Flight or CO2 Power, 109

Wood Model Kit,   Box Condition: VG

Sold   

Stick and tissue flying model airplane kit. Flyline Models was a manufacturer out of Fairfax, Virginia USA. The models are known for their high quality. The kit contains full size detailed plans/instructions, high quality printed balsa sheets, decals, wheels, tissue and more. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Revell Red October Submarine - Hunt for Red October, 1/400, 4006

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Still factory sealed. 1990 issue as a tie-in with the famous motion picture. Very nicely molded full hull kit with four opening missile launch tubes, two ballistic missiles fin-mounted sonar blister, simulated anechoic sonar dispersal tiles, detailed sail with periscope and sensors, dual props, bow planes, Soviet markings and a display stand.

Monogram Assault Tank - Sturmgeschuetz IV L/48 - With Diorama Instructions, 1/32, 8220-0300

Plastic Model Kit,   Box Condition: Sealed Good+

Sold   

Still factory sealed. 1972 Mattel/Monogram issue with optional 'battle damaged' parts and desirable Diorama Instructions. Very nicely molded and detailed model elevating gun, working treads, bogies with spring action, extra helmets, jerry cans and tread links and a crew of two.

Monogram 1934 Duesenberg SJ Torpedo Phaeton Weyman Body, 1/24, 8201

Plastic Model Kit,   Box Condition: Good-

Sold   

1979 issue. Highly detailed and well molded kit of the Weyman four-door convertible with dual windshields. Features full rolling chassis just like the actual car, detailed engine and interior and removable hood and convertible top. Molded in high-gloss yellow, black, white, chrome plate and with rubber tires. The kit has never been started. It has been inventoried and NOTE: missing one piece, #113 flat rear windshield. I have included thick, quality clear with the kit so you can make this part. Otherwise complete with all other parts and includes instructions.

MPC 1968 Pontiac Bonneville Convertible - Stock or Custom With Clear Bubble Top, 1/25, 1068-200

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Very rare and in amazing, investment-grade 'factory sealed near mint' condition. Very nice early model featuring detailed stock engine or optional blower, full stock or custom interiors, stock or custom wheels, rubber narrow whitewall tires, detailed underside with separate exhaust, trailer ball and hitch, opening hood, optional front and rear end custom treatments and a very neat clear bubble custom top. Molded in white, clear, red-tinted clear, chrome plate and with rubber tires.

Hasegawa TA-4J Skyhawk - US Navy VC-1, 1/48, PT43

Plastic Model Kit,   Box Condition: Sealed Exc

Sold   

Still factory sealed. Dated 2009 and has 143 pieces. Features all very fine recessed panel lines, well detailed twin cockpits, excellent intake and exhaust, detailed gear wells, separately molded leading edge slats and trailing edge flaps, optional position speed brakes with detailed wells, two wing drop tanks, optional position canopy, boarding ladder and large, extensive decal sheet for the very colorful VC-1 aircraft shown.

Signifer Grumman JRF Goose - US Navy / England / France / Japan, 1/48, SIG48001

Plastic Model Kit,   Box Condition: Exc

Sold   

Highly detailed, limited run, large-scale issue of this Navy utility seaplane of WW2. Features injection molded main airframe parts with fine recessed panel lines, complete resin cockpit, complete radio operator/navigator station, full cabin interior (so detailed it seems a shame to not show it), wheels, engines & exhaust, separately molded ailerons, elevators and rudder, rigging diagram, paint guide and markings for all four aircraft and more. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Monogram F-100D Super Sabre High Tech, 1/48, 5471

Plastic Model Kit,   Box Condition: Good++

Sold   

Includes photoetched parts and very colorful 'Century Series' style decals. Features full cockpit and wheel well details, visible gun bay with optional hatch, realistic internal inlet, optional jet exhaust and refueling probe for camo or natural finish, optional position speed brakes and canopy, full underwing stores - bombs, missiles, drop tank - and boarding ladder with ground crew member. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Testors NASA F-104A Starfighter, 1/48, 504

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Still factory sealed. Rare 1978 1/48 scale issue with full NASA decals.

Minicraft Rockwell B-1A - Supersonic Strategic Bomber - (ex Entex), 1/144, 11606

Plastic Model Kit,   Box Condition: VG

Sold   

Unusual kit of the original B-1 in it's "A" Mach 2 high altitude configuration. Prototypes were built and flown, but the 'A' variant never entered production. The 'B', optimized for low-level penetration and subsonic performance was developed shortly after. The model features recessed surface detail, wings that swing, good intake and exhaust detail, cockpit tub with bulkheads and seats, detailed landing gear, optional position crew boarding stairs and more. With display stand and decals for two "A" aircraft, #40158 and 40159