Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

AMT 1963 Pontiac Tempest Convertible 3 in 1 - Stock / Custom / Competition, 1/25, 05-613-149

Plastic Model Kit,   Box Condition: Fair-

Sold   

Rare and very nicely molded kit. This first and only issue dates from late 1962/63 and can be built any one of three ways - stock, custom or competition. Includes a very large number of optional custom parts so you can make a totally unique automobile. Features full interior with optional seat belts, reel-to-reel tape deck, air conditioner, rear speaker, telephone, stuffed animal (rabbit), tachometer and gauges, rotating wheels, optional front and rear end custom treatments, chromed brake drum, jack stand, molded-in underside detail and more. Molded in white, clear, red tinted clear & chrome and with rubber tires, metal axles and metal body screws. The kit has never been started. The car parts have been inventoried have been inventoried complete and includes the assembly instructions, white wall stickers and their special instruction sheet. NOTE: missing decals. There is a tire burn on the front roll pan that is located under the front bumper; it is repairable with filler. There is a very light burn on the optional custom rear airfoil.

Kinetic Grumman S2F / S-2E / S-2G Tracker - VS-37 Sawbucks, 1/48, K48024

Plastic Model Kit,   Box Condition: Sealed Exc

Sold   

Still factory 'round tape' sealed. From completely new molds and very highly detailed inside and out.

Sweet Japanese Navy Aircraft Carrier Flight Deck Set - Includes Rear Lift/Elevator - Bagged, 1/144, 1

Plastic Model Kit,   Box Condition: Sealed

Sold   

Still factory sealed. Sweet Aviation Models are perhaps the finest and most detailed kits ever produced in 1/144 scale. This model is a very finely molded flight deck display for one or more 1/144 IJN aircraft. It features a flight deck section measuring ~ 7 x 6 inches an elevator section in the middle and very fine, all-recessed surface detail.

Sweet Nakajima A6M2-N type 2 Floatplane Fighter Rufe - Two Kits, 1/144, 30

Plastic Model Kit,   Box Condition: Exc

Sold   

Sweet Aviation Models are perhaps the finest and most detailed kits ever produced in 1/144 scale and always include an incredible decal sheet for multiple aircraft. This model features two Rufe kits with very fine recessed panel lines, basic cockpit, detailed engine front, optional bomb load, detailed beaching dolly and more. Includes a 'water' display base and a large and extensive decal sheet and full color painting guide for 7 different aircraft. Never started and inventoried 100% complete. Includes decals and instructions.

AFV Club TWO SH-3 A/D Sea King - US Navy HS-4 USS Iwo Jima LPH-2 April 17 1970 Apollo 13 / Indian Navy INS Shikra Mumbai 1980 / Royal Canadian Navy HS50 HMCS Bonaventure 1965 / USN HC-1 USS Coral Sea CV-43 1972 - (SH-3A/D), 1/144, AR14405

Plastic Model Kit,   Box Condition: Exc

Sold   

Features all fine recessed panel lines, detailed cockpit, cabin interior & bulkheads, optional position fuselage doors, optional stowed or extended tail and main rotors and more. Includes a full color, multi-view painting guide for all helicopters listed. Never started and inventoried complete with all parts and includes decals and instructions.

DML Target Baghdad F-15E Strike Eagle And F-15C Eagle, 1/144, 4022

Plastic Model Kit,   Box Condition: VG

Sold   

This model contains both highly detailed kits that features all recessed panel lines, detailed landing gear, external weapons & drop tank load, clear canopy and more. Includes painting guide and extensive decals for both aircraft. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.

DML Target Baghdad F-15E Strike Eagle And F-15C Eagle, 1/144, 4022

Plastic Model Kit,   Box Condition: Sealed Exc

Sold   

Still factory sealed. This model contains both highly detailed kits that features all recessed panel lines, detailed landing gear, external weapons & drop tank load, clear canopy and more. Includes painting guide and extensive decals for both aircraft.

DML Libyan Raiders A-6E And F/A-18A, 1/144, 4006

Plastic Model Kit,   Box Condition: NM

Sold   

This model contains both highly detailed kits that features all recessed panel lines, detailed landing gear, external weapons & drop tank load, clear canopy and more. Includes painting guide and extensive decals for both aircraft. Never started and inventoried complete with all parts and includes decals and instructions.

Guillows De Havilland DH-4 - 27 Inch Wingspan RC / Gas / Rubber Flying Model, 205

Wood Model Kit,   Box Condition: Good-

Sold   

Large-scale, well detailed kit from about 1964. Can be flown rubber free flight, gas free flight, or converted to electric RC using modern servos and receivers. Well detailed and features die cut balsa parts, rubber motor, plywood firewall, scale plastic wheels, plastic propeller, vacuform nose / machine guns / pilot busts, two big sheets of full color decals, covering tissue and excellent full size plans. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. Guillow's founder, Paul K. Guillow, was a WWI naval aviator. In 1926 he began producing wooden model airplane kits. His 'Shelf Models' were some of the earlier non-flying models in production. Guillow's grew during the model boom of the 1930s, and when the Depression hit the hardest, Guillow's responded with lower prices and became one of the low price leaders, frequently advertising in Model Airplane News and other leading publications. During the war, like most manufacturers, Guillow's was forced to alternative materials such as cardboard and pine. Guillow's survived the post WWII slump by creating many inexpensive profile flying rubber powered aircraft and gliders in the 1950s (along with North Pacific) which became famous - some are still available today. The stick and tissue lines have been updated with laser cut parts and are still in production as of 2009.

Jo-Han 1963 Dodge Polara Hardtop Customizing Kit - Stock / Custom / Track or Drag, 1/25, 4563-149

Plastic Model Kit,   Box Condition: Good-

Sold   

Very rare original issue. Even rarer in this condition. Features detailed 426 Ramcharger engine & engine compartment, opening hood, full interior, detailed underside, numerous custom and race parts and much more. Molded in light mint green, clear, red-tinted clear, chrome plate and with rubber tires, metal axles and metal body screws. There are no tire burns (or at least no significant ones that I could spot). The kit has never been started. It has been inventoried with all car parts present and includes high-quality photocopied instructions. NOTE: missing decals and original instructions.

Hasegawa Ferarri 250 Testa Rossa Chassis NO.0714 TR - Plus Hobby Design PE Set (Details And Wire Wheels), 1/24, 20246

Plastic Model Kit,   Box Condition: Exc

Sold   

Includes the Hobby Design #HYDHD02-0010 PE Super Detail Set designed for this kit. Includes three PE frets with numerous parts and a scale clear windshield. Never started and complete; includes extensive and illustrated instructions. Oddly the instructions don't include how to build up the wire wheels; I guess this is self-explanatory if you have experience. The actual kit is hard-to-find and dated 2009. This finely molded model features 137 pieces, tube frame, detailed engine and removable hood, very good suspension, driveline and exhaust, full interior and more. Molded in gloss white, clear, black and chrome with rubber tires. There is a large and color decal sheet with all numbers, stripes, badges, emblems, seat belts, instrument faces and more. The kit has never been started. Internal factory sealed bags including decals and instructions.

Aurora Douglas F4D Skyray, 1/88, 292-29

Plastic Model Kit,   Box Condition: Good

Sold   

Dated 1957 and very likely the first issue. Please note the '.29' price circle at the far right and the Parents' Magazine seal at the lower right. This kit was issued with the 'simplified' logo with no 'Northern Lights' in the oval logo. Molded in gloss light gray and clear. The kit has never been started. Inventoried 100% complete including decals and instructions. The box is only graded 'good' because of even but significant general surface wear as shown.

Revell F4U-1 Corsair - (F4U1), 1/32, H278

Plastic Model Kit,   Box Condition: VG+

Sold   

Classic, well-detailed large-scale model from 1970. Decals are for the Corsair flown by Pacific Ace Ira Kepford. Features detailed Pratt and Whitney R-2800 engine and removable cowling, opening canopy and complete cockpit, folding wings, clear landing lights, optional position landing gear and movable wheels and propeller. Never started. It has been inventoried complete with all parts and includes decals and instructions.

Revell White Gas Truck - White Motor Compnay 3000 Series (3022 PLT) Tractor Truck with Fruehauf 6000 Gallon Trailer - Mobilgas Gas Truck - O Gauge, 1/48, 1420

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Still factory sealed. 1995 reissue of this great 1950s kit. Features detailed engine, movable cab, full chassis and interior, opening valve compartment doors, Champion sign and crew of two as shown on the cover artwork.

Fujimi TWO A-1H Douglas Skyraider, 1/70, FH-3-129

Plastic Model Kit,   Box Condition: VG

Sold   

SALE!! Includes two kits in the one box shown. Kit #1 is never started and inventoried complete with all parts, including decals and instructions. Kit #2 is not started. It has been inventoried and NOTE: missing (5) of (12) small bombs. Otherwise complete with all other parts, decals and instructions present. Very finely molded early Fujimi kit with decals for VA-145 US Navy and the very colorful red and gray Marine AES-12 as well as a nice full color painting guide. Includes extensive underwing weapons.

Frog Swordfish Mk.1 - 810(TSR) Sq HMS Ark Royal 1041 or No. 701 Catapult Flight HMS Hood 1938, 1/72, F258

Plastic Model Kit,   Box Condition: Good+

Sold   

Final issue with the late 1970s Frog logo. Includes decals for both historic aircraft and a color painting guide as well. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. Frog is considered the father of injection molded model kits. The Lines Brothers opened Frog in 1932, capitalizing on the fever caused by Lindberg's solo transatlantic flight. Almost overnight the western populations became 'Air-Minded', and anything aviation was in high demand. Frog created a quality line of stick and tissue rubber powered aircraft and gliders as well as innovative ready-to-fly rubber powered aircraft that required no assembly. The box even contained a built-in rubber motor winder and fuselage holder. Model airplane flight competitions were popular in Great Britain, and one category was 'Rise Off the Ground', or ROG. By changing this to 'Flies Right Off the Ground', the FROG name was born. In 1936 Frog created a line of injection molded plastic models, the first such kit line in the world (Hawk sold a line of injection molded aircraft models in 1934 but they were factory assembled and painted). Named 'Penguin' after the bird that does not fly, the kits were innovative beyond the means of production. At a time when models were simply built by wingspan, the Penguin line was a constant 1/72 scale. Furthermore, a large 1/72 Short S.30 Empire class flying boat contained a full interior and lights! A line of accessories such as AA guns, tractors, hanger, ambulance, sound locator, searchlights and lighting kits were quickly added to the line. WWII caused a pause in production. After the war the box color changed from silver to green, and Penguin kits were also marketed in the USA. Production ended in 1950. Frog quickly expanded and released the Red, Orange, Black, Green, Gold Token, Spin and Comet series as well as Trail Blazers and several others. It is noteworthy that while most manufacturers in the 1940s/50 were making toy-like models, Frog attempted to make very realistic models. For example, 'detailing' kits with excessively large rivets was once very popular. Frog ignored this trend and continued to mold aircraft with fine panel lines and no rivets. As a result, Frog kits can be built into very realistic replicas. Production ended in the late 1970s, but Frog molds are still in use around the world.

Fujimi Douglas TA-4F / TA-4G Skyhawk - Royal Australian Navy TA-4G / H & MS-11 Marines Headquarters & Maintenance Sq / US Navy VF-126 RCVW-12, 1/48, 0784

Plastic Model Kit,   Box Condition: VG

Sold   

This large scale kit of the venerable two seat Skyhawk is well molded and includes with decals for all three aircraft. There is a color painting guide on the back of the box. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.

Eduard TWO Ju-87B Stuka, 1/144, 4414

Plastic Model Kit,   Box Condition: VG

Sold   

SALE! Includes two complete kits in the one box. Both are never started and inventoried complete with all parts and includes decals and instructions. These are incredibly well molded 1/144 scale models which also include many PE metal parts, mask set, decals for multiple aircraft and multi-view, full color painting guides.

Revell Lockheed C-130A Hercules- Picture Plane Issue with Service Vehicles, 1/140, H183-98

Plastic Model Kit,   Box Condition: VG+

Sold   

Very rare 1960 hardbox release. This classic kit is a reissue of the 'S' kit from the 1950s and is one of the last Revell C-130s to include the fuel truck and engine check stand with ground crew member. Molded in gloss silver and clear plastic. Never started and inventoried complete with all parts and includes decals and instructions. Decals are perfectly flat, 100% intact and in 'excellent++' condition with slight age yellowing as the only flaw. Instruction are in 'near mint' condition.

Tsukuda Hobby Douglas A-1H Skyraider - (AD-6), 1/72, WP02

Plastic Model Kit,   Box Condition: VG

Sold   

Cleanly molded kit with all fine recessed panel lines, optional position dive/air brakes and a large weapons load out. Never started and inventoried with all parts, instructions and Fujimi decals. NOTE: the original decals are missing, so I have included a set of Fujimi 1/72 Skyraider decals for VA-146 and US Marines AES-12 Quantico.