MPC 1963 Chevrolet Corvette Stingray Split Window Coupe, 1/16, 1-3076
Plastic Model Kit, Box Condition: Sealed VG
Sold
Still factory sealed. 1984 issue. Nicely detailed, large-scale kit. Can be built stock or modified. Molded in black, clear, red-tinted clear, chrome and with rubber tires. Features detailed chassis, opening hood, detailed 327 V8 with Fuel Injection or Tri-Power carbs, working front suspension with metal springs, steerable front wheels, complete interior, optional factory side pipes, custom roll bar and optional decals.
ESCI IAI Kfir C-2 'Young Lion' - (C2), 1/48, SC-4007
Plastic Model Kit, Box Condition: Good-
Sold
Features optional position canopy, full Israeli Air Force markings, Shafrir Air-to-Air Missiles, wing drop tanks and centerline fuel tank. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
AMT Curtiss P-40K Warhawk - Major Ed Hollmeyer 16th FS Kunming China 1943, 1/48, 8794
Plastic Model Kit, Box Condition: VG
Sold
From 1996. Nicely molded and detailed. Features fine all-recessed panel lines, complete cockpit, four piece canopy, drop tank and bombs, detailed wheel wells and more. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Airliners America MD-80 PSA Airliner - (Pacific Southwest Airliner) + PSA Decals for DC-9-30, 1/144
Plastic Model Kit, Box Condition: Exc
Sold
Limited run kit featuring injection molded wings, engine pods and landing gear, cast resin fuselage and extensive and colorful PSA decals for multiple registration numbers, PSA decals for the mass-produced DC-9-30 kit (not included), two sets of ATP Cabin and Cockpit Window Decals with silver frames and two sheets of ATP Wingwalk decals. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions. Please note there are instructions and a marking guide for the decals; the kit is very simple and ATP did not issue assembly instructions with it.
Cleveland 1933 Boeing 247 Transport - 55 inch Wingspan Flying Model, 1/16, SF-35
Wood Model Kit, Box Condition: Good
Sold
Very rare scale model and the largest 247 kit ever made. Huge stick and tissue kit designed for free flight but can be converted to electric drive remote control. Wingspan is 55 and 5/8 inches and length is 38 and 5/8 inches. Dates from 1933, '34 or '35 because of the NRA (National Recovery Administration) ink stamp on the bottom of the box. Cleveland had a reputation for making the finest and most accurate scale models in the 1930s and this kit is no exception. Features fully turned engine speed rings, prop bushings with brass bearing inserts, fibre props with completely cut wooden hubs, fully formed main wheels with brass bushings, high quality strip wood, numerous sheets of printwood, clear window material, two colors of covering material, 5 plates of full size plans and assembly instructions (on 2 sheets of paper) and more. The kit has never been started. It has been inventoried complete with all parts and includes all plans and instructions.
Monogram X-30 Supersonic Aircraft, 1144
Plastic Model Kit, Box Condition: VG++
Sold
1989 issue. Rare. Features a nicely molded X-30 in flight with a display stand and full decals. The scale is not known, but the kit measures just over 11 inches long when assembled. The kit has never been started. Internal factory sealed bag including decals and instructions.
Hasegawa Junkers Ju-87G Stuka, 1/32, 08075
Plastic Model Kit, Box Condition: Sealed NM
Sold
First issue of the incredible kit featuring a bonus Han-Ulrich Rudel and military dog in cast metal 1/32 scale to match the kit. Still factory sealed.
Bluejacket Liberty Ship EC2-S-C1 - 27 Inch Long Wood and Metal Ship, 1/192, 1025
Wood and Metal Model Kit, Box Condition: Good
Sold
Museum quality craftsman kit. Features hardwood, kiln-dried, precarved hull, extensive high quality cast Britannia fittings and other hardwood and metal parts as required. Includes very detailed full size plans and instructions. This issue is from the late 1980s or early 1990s. The kit has never been started. The parts that were never factory sealed (hull, wood and metal stock) have been inventoried complete. Most of the fittings are still in factory sealed bags in the factory box; the few fittings bags that were opened have been inventoried complete. Includes plans and instructions. The Liberty Ships were built in vast numbers very quickly in response to the emergency shipping requirements of WWI. German U-Boats put tremendous pressure on Britain and the USA to maintain supply lines. Generally British in design, the Liberty Ship borrowed much from later WWI designs and was adapted to American mass-production techniques. Over 2700 were built, easily making it the most produced ship (of one class) in history. The replacement in 1944 was the Victory Ship, of which Bluejacket also makes a model.
AMT 1972 Chevrolet Fleetside Cheyenne Pickup Truck, 1/25, 38586
Plastic Model Kit, Box Condition: Sealed Exc+
Sold
From 2006 - uses the same molds from the 1995 issue. Nicely detailed model features complete interior, detailed 350 CID V-8 engine and compartment, opening hood and more.
Revell Russian Spy Fishing Trawler Volga, H379-250
Plastic Model Kit, Box Condition: Good-
Sold
Dated 1970. Larger scale kit is almost 15 inches long when assembled. Features full hull, electronic surveillance gear, radar masts and antenna, full deck fittings and rails, large movable derrick, movable lifeboat davit, rudder and small cargo booms, whaleback and full toprails, searchlights and compass, two Russian Spy crew figures, Russian markings and display base. The kit has never been started. Inventoried 100% complete including decals and instructions. NOTE: the instructions have minor bug damage. The decals have bug damage to the backing paper only; the actual transfers are fine.
Hobby Craft Polikarpov I-16 Type 24, 1/48, HC1576
Plastic Model Kit, Box Condition: Sealed Exc
Sold
Still factory sealed. A nicely molded kit with all fine recessed panel line details. Features good cockpit and engine detail and decals for two aircraft.
Revell John Force Castrol Olds Funny Car, 1/25, 7173
Plastic Model Kit, Box Condition: Exc
Sold
Dated 1989. Very nice kit featuring detailed racing chassis and engine, lift-up body, full racing cockpit, very colorful decals and more. Molded in white plastic, clear, chrome plate and with rubber tires. Never started. All the parts that were factory sealed are still sealed; the parts that were not (clear and chrome) have been inventoried complete. With instructions and decals.
AMT 1964 Chrysler Imperial 2 Door Hardtop - 3 in 1 Customizing Kit - Stock / Custom / Parade, 1/25, 6824-150
Plastic Model Kit, Box Condition: VG
Sold
Rare early issue. Nicely detailed and includes all parts needed to build one of three versions - factory stock, Gene Winfield Custom and parade. The kit has never been started. Inventoried and NOTE: missing one custom part, the dictaphone. Otherwise includes all other parts, decals and instructions. NOTE: the decals have minor age micro-cracking. There are tire burns on the figures and some custom parts (2 flags, custom console, under-dash aftermarket A/C (only on the bottom of it) and the custom writing table).
Trumpeter Zhongshan / Chung Shan / Yongfeng Gunship, 1/150, 03503
Plastic Model Kit, Box Condition: VG
Sold
Large scale, full-hull model that can be motorized for R/C operation. Features full deck fittings and even complete railings. The kit has never been started. It has been inventoried complete with all parts and includes instructions. The brass prop shaft tubes are installed in the hull, but I believe that was done at the factory. The quality of the work is 'professional.' This version does not include the motor but still contains the driveline parts. The Zhongshan/Yongfeng was the class leader of four 780-ton coastal defense ships ordered from Mitsubishi in Japan by the Chinese Qing Empire in 1910. In the agreement6 between the naval minister Prince Rui, Admiral Sa Zhenbing and the Japanese, the first two ships were built in Japan and the second pair at Jiangnan Shipyard in China with Japanese technical help. All four ships differed slightly from one another. Due to their small size (less than 1000 tons displacement), these ships are also frequently called gunboats. She lead a very active career. In the Second Sino-Japanese War, the ship was in the Battle of Wuhan. She was bombed and sunk in the Yangtze River by the Japanese on 24 October 1938. But the story does not end there. The cultural department of Hubei received permission recover the Zhongshan in 1986. She was finally salvaged from the Yangtze on January 28th, 1997. By 2001, Zhongshan was restored to her 1925 appearance except for some of the damage which sank her in 1938. The gunboat is now on display in its own museum in Wuhan. I believe this is the only remaining example of a gunboat from this time.
ESCI PV-22A Osprey US Navy - ASW Patrol Version, 1/72, 9084
Plastic Model Kit, Box Condition: Sealed Exc
Sold
Very rare. Still factory sealed but the seal has split. Proposed but never built naval version for ASW work. Features all very fine recessed panel lines, detailed cockpit and interior, rotating engine pods, patrol loadout and more.
UPC McDonnell F4H-1 (F-4C) Phantom II - Bagged, 1/50, 5090-298
Plastic Model Kit, Box Condition: No Box
Sold
Bagged kit - there is no box. The box is shown for reference only! This kit represents somewhat of a mystery. We know that UPC did not make any of their own tooling, but the mold origin of this kit is unknown. In an apparent cost saving measure, the large box re-uses the same Scott Edison box art from the 1/72 UPC F-4 which is an ex-Hasegawa kit. The dramatic box art claims this is a F-4C; however, the instructions state that it is an F-4H-1. Since they are a copy of the original manufacturers instructions, I believe the instructions. The kit is interesting for the level of detail. It includes the internal fuselage fuel tanks and two detailed engines. The cockpit features ejection seats, two pilots, side instrument panels, control stick, main panels and opening canopies. Rudders, ailerons, flaps and elevators all move and the wings fold as well. There are internal wing fuel tanks. The landing gear retracts and extends and all gear doors close also. The nose can be removed to display a detailed radar package. A wide choice of wing and fuselage loadouts is provided, with numerous AIM-7 Sparrow missiles, iron bombs and a centerline drop tank. There is one large decal sheet with two decal choices - 'FJ-199' USAF as shown on the box art, and a US Navy aircraft from VF-102 USS Enterprise. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.
Billing Boats Flyvefishken The Flying Fish P550 Patrol Boat - 42.5 Inches Long For Display or R/C, 1/50, 598
Wood and Metal Model Kit, Box Condition: Sealed NM
Sold
Still factory sealed. Sells for $575 in this condition. Very highly detailed for either static display or R/C operation. Features CNC cut plastic hull, extensive plastic and metal fittings set and other parts in wood, plastic and metal.
Doyusha Boeing 727 ANA, 1/100, 100-B2-3000
Plastic Model Kit, Box Condition: Sealed Exc+
Sold
Still factory sealed but the seal has split on the left side. Large scale, well-molded model that measures 18 inches long when assembled. Excellent detail including rear airstair door, full landing gear, clear windows and very large and colorful decal sheet for ANA.
Monogram F-80 Shooting Star - 25 FIS 51 FIW 'Lid-Do-Bee' Oct 1950 or Acrojets Demonstration Team Williams AFB AZ 1949, 1/48, 85-5311
Plastic Model Kit, Box Condition: VG
Sold
2010 reissue of the original 1977 'White Box' model. Very well molded featuring detailed cockpit and pilot figure, optional position canopy, detailed machine gun bay with optional position cover, excellent gear wells, optional position speed brakes with well detail, two types of external fuel tanks, iron bomb or napalm weapons load, full engine exhaust section and removable rear fuselage with cradle. With large, very colorful decal sheet for the two aircraft listed. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Midwest The Fireboat - 25 Inches Long For R/C Or Display, 960
Wood and Metal Model Kit, Box Condition: VG
Sold
Out of production version of the classic working fireboat. This is a deluxe plank-on-frame model featuring basswood and balsa parts, die cut parts, full metal and brass fittings set, full size plans, full instructions and more. Designed for 3 channel RC with an electric drive. This kit has not been started. The kit has never been started. The parts are still in the internal factory sealed bags and includes plans instructions.