Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Tamiya Sturmtiger 38cm Assault Mortar, 1/35, 35177

Plastic Model Kit,   Box Condition: Sealed Exc

$37   

SALE!! Still factory sealed. Very well molded and features detailed interior and exterior, crew member and separately molded track links.

Tamiya 20mm Flakvierling 8 ton Semitrack Sd.Kfz 7/1, 1/35, 35050

Plastic Model Kit,   Box Condition: Sealed VG

$38   

Still factory sealed; the seal has shrunk and drawn the box top slightly concave as shown. Very highly detailed and well molded.

IMA Churchill Mk.VII Bridgelayer Conversion Set - For Tamiya Churchill Mk7 Base Kit - By International Models Asia, 1/35

Resin Model Kit,   Box Condition: Sealed NM

$84   

Still factory sealed. Very rare and still factory tape sealed. This offering is the only way to build a 1/35 Bridgelayer on a Churchill chassis. This is a resin and mixed multimedia conversion kit. Please note, it requires a base kit and was designed for use with the Tamiya 1/35 Churchill Mk7. Louis Wright, who provided 95% of the photographic reference material for this model, reports that this version of the Churchill Bridgelayer is a post-WWII design.

Airfix Apollo Lunar Module / Astronauts / Equipment / Moon Base, 1/72, 03013

Plastic Model Kit,   Box Condition: Fair++

$39   

1991 issue features lunar module with astronaut figures, simulated moon surface base and models of experimental equipment. Never started and inventoried complete with all parts and includes decals and instructions.

Airfix Grumman J2F6 Duck - Wartime or Postwar Markings, 1/72, 263

Plastic Model Kit,   Box Condition: VG+

$30   

1960s type Three logo issue. The amazing Duck first flew in 1934, saw service all through WWII and was not phased out until the mid 1950s. This is a very nicely molded and detailed model that features markings for both aircraft, under-wing bomb load, optional position canopy, interior with crew members, lower cabin for passengers, optional position landing gear and more. Never started. Inventoried 100% complete with all parts, decals and instructions present.

SNAP 280mm Atomic Cannon With 2 Gun Transporters - (M65) - (ex Adams), 1/40, 53-398

Plastic Model Kit,   Box Condition: Good-

$295   

Very rare issue of this incredible kit. This Classic Cold-War model was originally designed and created by Adams. In the late 1950s, Adams closed down and sold Athearn the molds; Athearn then reissued the kits under the name SNAP. This was a short-lived arrangement. To boost sales, Athearn even approach Marusan in Japan where some were joint-issued as Marusan-SNAP kits. The molds were stored for quite some time then acquired by Life-Like much later. The Atomic Cannon was the Army's 20 mile range gun that could fire shells that contains small atomic bombs. The model is very highly detailed for that time and features transporters with movable wheels, towing yokes, fully detailed cab interiors & complete suspension, elevating and swiveling machine guns; the Atomic Cannon itself can be configured for firing or towing positions, the barrel elevates by real operating gears, the carriage rotates 360 degrees on platform and it actually fires 2 "Atomic" shells. Includes crew of 7. Inside, the model is factory new. It has never been started.. The parts that were factory sealed (in two bags) are still in those factory sealed bags; the parts that were never factory sealed have been inventoried complete. With decals and instructions. The decals are absolutely flat and in 'Excellent' condition with the typical yellowing as the only flaw. The instructions are in 'very good++' condition. The box is completely intact and 1005 present but is graded 'good-' because of moderate to significant wear as shown. The box sides are in the same condition as the top. The box tray is in the same condition - intact but 'good-' and includes the center cardboard divider. Please note that SNAP packed this model in a very large box- much larger than required. It makes for a great display of the incredible Adam's box artwork but does increase the shipping price. The amazing M65 280mm atomic cannon originally started life as a conventional artillery piece. Development first began in 1944 before the first atomic weapon had been tested. Far from being 'just another giant gun', the M65 was carefully designed to be a very mobile and versatile weapon. Liberal use of aluminum and other light-weight metals kept the weight of the gun and both transports to about 85 tons, which is not much more than the largest conventional gun of WWII. As a result, it is light enough to be carried by trucks and cross bridges without collapsing them. Size was also a major factor, as it can fit inside landing craft, turn street corners of an amazingly small radius and travel as fast at 35 mph. The two transporters are required to move the gun, with one in back and one in front. Power is supplied to each tractor by a 6 cylinder engine with 375 horsepower. Both transmissions are manually controlled. These 4x4 machines can push, pull or parallel one another - with the gun slung between them. The driver of the front tractor has control of the brakes and throttles of both units and can communicate to the rear driver by telephone. The gun can be traversed in a complete circle and has a range of up to 20 miles. A complete 280mm batter consisted of two guns, four 5-ton trucks towing ammunition trailers, another two trucks pulling a pair of generator trailers (each with a 30 KW generator to furnish power to the guns, a 5th truck carrying four shell carts and a 2 1/2 ton shop van. The total crew was about 100 men. Each gun could be set up to fire in less than 12 minutes and can fire a round every two minutes.

Great Planes Spirit Elite ARF 2 Meter Sailplane - 78.5 Inch Wingspan Almost Ready To Fly R/C Glider, GPMA1047

Other Materials,   Box Condition: Good

$125   

**SAVE! Pick up in Lexington, KY and eliminate all shipping charges. I can meet you at our local Panera Bread for delivery.** This is a large, 90% finished RC model that is truly 'Almost Ready To Fly.' Features balsa and lite ply built up wings and tail feathers that are professionally covered in Top Flite Monokote, fiberglass fuselage that is finished in white gelcoat, canopy, hardware and more. Never started. Inside, everything is exactly as it left the factory. All of the parts are still in the internal factory sealed bags. Includes all paperwork.

Great Planes Electrifly Sukhoi Su-31 ARF 3D- 39.4 Inch Wingspan Amost Ready To Fly R/C Aircraft, GPMA1185

Wood Model Kit,   Box Condition: VG

$95   

**SAVE! Pick up in Lexington, KY and eliminate all shipping charges. I can meet you at our local Panera Bread for delivery.** This ARF is 90% assembled and features wood and foam constructions. It is super lightweight and hovers with confidence & climbs straight up. Never started. Inside, everything is exactly as it left the factory. Almost all of the parts were factory sealed in clear bags; and are all still factory sealed. The few parts that were never sealed have been inventoried complete. Includes all paperwork.

Great Planes Slinger ARF Electric Powered Flying Wing - 47.37 Inch Wingspan Almost Ready To Fly R/C Aircraft, GPMA1180

Other Materials,   Box Condition: Good++

$125   

**SAVE! Pick up in Lexington, KY and eliminate all shipping charges. I can meet you at our local Panera Bread for delivery.** This is an RC model that is is made primarily of foam and takes about 20 to 30 minutes to build. Features fully decorated and assembled wings of virtually indestructible expanded polystyrene (EPS) foam with extra-tough expanded polypropylene (EPP) leading edges), center fuselage section, electric motor, hardware and more. Never started. Inside, everything is exactly as it left the factory. All of the parts are still in the internal factory sealed bags. Includes all paperwork.

Kyosho Calmato Trainer 40 ARF - 62.9 Inch Wingspan Almost Ready To Fly R/C Aircraft, A107034

Other Materials,   Box Condition: Good

$120   

This very large ARF kit is of all wood construction and completely covered in layered Monochrome and decorated exactly like the (left side, red) box top photos. Includes steerable nose gear with pre-installed linkage, wings that are held with dowels & pins and can be easily fixed to the fuselage with a screw, horizontal tail that is completely attached with a screw, factory-installed vertical stabilizer & rudder and more. Includes assembly booklet. The kit has never been started. The parts are still in the factory sealed bags and includes all paperwork. NOTE: this kit came in a very sturdy and thick cardboard box. It will ship in that box wrapped in thick brown paper. If you wish for it to be placed inside another box, let me know in the 'comments' section of checkout but be aware that additional shipping charges will apply and an invoice will emailed to you for that

Lanier RC Sea Bird ARF - 60 Inch Wingspan Almost Ready To Fly R/C Aircraft, 87206

Multimedia Model Kit,   Box Condition: VG+

$100   

**SAVE! Pick up in Lexington, KY and eliminate all shipping charges. I can meet you at our local Panera Bread for delivery.** This is a large, 90% finished RC model that is truly 'Almost Ready To Fly.' Never started. Inside, everything is exactly as it left the factory. The smaller parts are still in the factory sealed bags. The larger parts were never sealed and have been inventoried complete. Includes all paperwork. NOTE: this kit came in a very sturdy and thick cardboard box. It will ship in that box wrapped in thick brown paper. If you wish for it to be placed inside another box, let me know in the 'comments' section of checkout but be aware that additional shipping charges will apply.

Midwest Aero-Star .40 - 62 Inch Wingspan R/C Aircraft, 159

Wood Model Kit,   Box Condition: Good

$149   

**SAVE! Pick up in Lexington, KY and eliminate all shipping charges. I can meet you at our local Panera Bread for delivery.** Features the popular 'Success Series Handbook' which guides you through setting up your workshop, aircraft assembly and even preparing you for your first flight, machine-cut and sanded ribs, pre-cut spruce spares, pre-cut balsa sheeting, many other pre-cut and factory-shaped parts, quality hardware package and more. Includes three rolled plans and a large decal sheet. Never started. Inside, everything is exactly as it left the factory. Almost all of the parts were factory sealed in clear bags; they are all still factory sealed. The few parts that were never sealed have been inventoried complete. Includes all paperwork. NOTE: this kit came in a very sturdy and thick cardboard box. It will ship in that box wrapped in thick brown paper. If you wish for it to be placed inside another box, let me know in the 'comments' section of checkout but be aware that additional shipping charges will apply.

Pavla Miles M-38 Messenger - Civil or Montgomery's Airplane - BAGGED, 1/72, 72019

Plastic Model Kit,   Box Condition: No Box

$24   

NOTE: bagged kit; there is no box. The box is shown for reference only. High quality, limited run model features excelling injection molded parts with fine recessed panel lines, cast resin interior, brass PE parts and more. Has decals for either aircraft. Never started. The resin parts are still in the factory sealed bag as well as the PE details; otherwise inventoried complete and includes decals and instructions.

Revell Ar-240 C-02 Nightfighter - (Ar240C-02), 1/72, 04310

Plastic Model Kit,   Box Condition: Sealed Exc++

$32   

Still factory sealed. Well detailed with 79 pieces, all recessed panel lines, very good cockpit, movable machine gun turrets, extended wings, radar antenna array, optional position landing gear, detailed gear wells and more.

Revell Junkers Ju-88 A-4 / Ju-88 D-1 - Bomber or Reconnaissance Versions (Ju88A4 Ju88D1), 1/72, H113-130

Plastic Model Kit,   Box Condition: Exc

$34   

1967 issue of this popular model. The is kit is modeled off the D-1 on exhibit at the USAF Museum at Wright-Patterson AFB in Ohio, USA. Includes parts and decals for D-1 or A-4 variants. Features removable cowling, two detailed engines, optional position landing gear, rotating wheels and propellers, crew of three and four 550lb bombs and bomb racks for the A-4 bomber version. Never started. Inventoried complete with all parts, decals and instructions present.

Revell Spad XIII - Captain Eddie Rickenbacker 94th Aero Squadron, 1/28, 4418

Plastic Model Kit,   Box Condition: VG

$48   

1981 issue from the original, well detailed 1957 'S' molds. Features a very large and colorful decal sheet for the aircraft shown on the box art, detailed Hispano-Suiza engine, removable inspection panels, machine guns, full cockpit, rotating wheels & propeller and full rigging instructions. NOTE: this kit has very minor and 'professional' quality assembly to two pieces: intake manifold assembled and painted. There is no other assembly. It has been inventoried complete with all parts and includes decals and instructions.

Revell Brewster F2A Buffalo, 1/72, H636-50

Plastic Model Kit,   Box Condition: VG

$29   

Two piece box issue dated 1964. Features Brian Knight's classic art of the Buffalo departing from a Lexington-Class carrier in the 'as-launched' configuration. I believe this is the first issue of this kit. Molded in gloss medium gray and clear. The kit has never been started. Inventoried complete with all parts and includes decals and instructions.

Sword Chance Vought V-173 Flying Pancake, 1/72, KPS72018

Plastic Model Kit,   Box Condition: VG

$68   

High quality limited edition model that includes decals and painting guide for this aircraft as seen at Stradford, December 1942 and Norfolk, June 6 1947. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Trumpeter USS Arleigh Burke DDG-51 Destroyer, 1/350, 04523

Plastic Model Kit,   Box Condition: NM

$48   

Well molded and very detailed with 397 pieces. Features one piece, full hull design, PE fret with all railings & more, accurate propeller and rudder detail, excellent superstructure with full sensors, detailed weapons, extensive decals and much more. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.

Trumpeter Korean K1A1 Tank Motorized, 1/35, 00331

Plastic Model Kit,   Box Condition: Exc

$24   

Sale Pending
Sign up for the Hotlist.

Motorized 1/35 scale tank model with realistic drive through the sprockets and flexible tracks. Includes the electric motor and all motorizing hardware: battery box, switch, wiring and gear box. Feature rotating turret, elevating gun, three figures and more. Never started and the parts are still in the internal factory sealed bags and includes instructions.