Metal Model Kit, Box Condition: Good-
$59
Rare flying toy, most likely from the late 1940s or the the early 1950s. The original price was $3.00, which made it very expensive for that time. Berg's Humming Bird was made in "Allied Western Germany" and distributed by Josef Seidel of 878 Broadway, NY 3, NY. This is a flying helicopter that is completely prefabricated and consists of a very lightweight metle body with rubber wheels, a large completely-assembled rotor assembly with metal rotor head and frames with the blades covered in silver doped tissue, a heavy launching rod with a metal threaded rod and coupler and wooden handle painted red. The Instructions are present and it is a simple matter of placing the rotor assembly into the body, then putting the launching device underneath where it engages the rotor head. Then a quick pull on the upper handle sets the rotors spinning and up she goes! The model is 100% complete with all parts and illustrated instructions. Judging from the condition, it has never been flown.
Plastic Model Kit, Box Condition: VG+
$42
Wing-Tech Cyber Hobby release with bonus full engines, PE Parts and very colorful decals. Very highly detailed kit with over 280 parts, all recessed panel lines, excellent cockpit, opened or closed canopy, ventral tank, positionable control surfaces and more. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Plastic Model Kit, Box Condition: Good-
$44
Dated 1984. Very well molded and detailed model that features 220+ parts including all parts and decals needed to build the both variants, flexible treads, hinged recoil spades, hinged barrel travel lock, rotating turret, optional position hatches and more. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Resin Model Kit, Box Condition: Sealed
$24
Still factory sealed. Features one two-story wall that is well detailed and very realistically battle damaged. Please note, it is common for these older castings to crack in shipment, so please be prepared to repair them (personally, I feel the cracks make them look more realistic).
Plastic Model Kit, Box Condition: Good
$44
Very well detailed and features injection molded parts with very fine recessed panel lines, many cast resin parts and photoetched details, full cockpit and gunners station, excellent gear well detail and more. Includes a decal sheet and full painting guide for four different aircraft. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Plastic Model Kit, Box Condition: Exc
$64
1972 issue with painting and rigging guide and Battle Terrain Display Base. Never started. It has been inventoried complete with all parts and includes decals and instructions.
Vaccuform Model Kit, Box Condition: VG
$62
Very rare kit from the 1940s. This is a large (17 inch LOA) model of this 1930s craft. This unique ship had no ailerons, rudder or elevator. Directional control was through a pivoting rotor head. Rotor blades folded for storage. The KD-1 made the worlds first autogyro roof-top landing in May of 1935 at the US Post Office in Philadelphia. The plans say this is the XR-2 and YG-1B. The plans certainly look like the YG-1B Army Craft; the YG-1B was modified with a constant speed rotor and became the YG-1C; it was then redesignated XR-2. This craft is also known as a KD-1; the model will built any of the three. Features 2D (profile) carved fuselage, hardwood rotor blades, other precut parts and a sealed envelope of small parts. Includes excellent full size plans with many detail drawings, templates and construction notes. Never started. Complete with all parts, plans and unused glass bottle of glue (some of which is still a liquid). Randles was another name for Ranco and may have simply been the deluxe version of the Ranco kits as they shared the same address. Just a few of those kits include the B-29, Cessna Bobcat, Sikorsky Helicopter and Kellett Auto Giro. There is evidence that they made boat kits also.
Plastic Model Kit, Box Condition: Sealed Exc
$65
Still factory sealed. 2013 issue from the original 1950s Strombecker molds. The design is from the classic Disney series "Man in Space".
Plastic Model Kit, Box Condition: Sealed
$26
Don't build your rare Aurora kit or spend hours restoring a junk kit! This is an ideal builder from the original Aurora molds.
Plastic Model Kit, Box Condition: Good
$22
Well detailed inside and out with optional top. Includes driver figure. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Wood Model Kit, Box Condition: VG
$38
Rare model from 1946 for the advanced Hawk collector. Hawk was one of the few manufacturers making wooden kits to a constant scale of 1/48. However, the company was innovative as it quickly included injection molded accessories. This model features profile (2D) cut wooden fuselage, wings and tail feathers, injection molded wheels, propeller and machine gun, wooden stock as required, metal seat, full color decals and high quality, full-size plans. Never started and complete.
Multimedia Model Kit, Box Condition: Sealed NM
$16
Still factory sealed. Excellent conversion kit made from high-definition resin.
Plastic Model Kit, Box Condition: Good-
$42
1971 issue that features full cockpit, removable cowl to show Jumo engine, sliding canopy, pilot figure and rotating wheels and propeller. Never started. It has been inventoried complete with all parts and includes decals and instructions.
Plastic Model Kit, Box Condition: Sealed Exc
$32
Still factory sealed. The box artwork is dated 1965 and like all early Heller kits, it has no part number. This sleek twin engine French bomber is well detailed for that time with full cockpit, crew stations, optional position landing gear and more.
Plastic Model Kit, Box Condition: VG++
$42
Hard to find Revell Takara issue dated 1977 with high-gloss box art unique to this kit. The model is from the same molds as the classic 1950s Pre-S kit. NOTE: this kit has minor, 'professional' quality subassembly as follows: horizontal stabilizer halves and jet engine pods. There is no other assembly. The aircraft has been inventoried with all parts present and includes decals and instructions.
Plastic Model Kit, Box Condition: Sealed Good
$36
Still factory sealed and the seal has shrunk and drawn the box top concave as shown. Unusual civil issue has very good detail including full interior with cockpit and stretchers, opening doors, engine and more.
Plastic Model Kit, Box Condition: VG
$59
1966 issue with 'South East Asia' box artwork by B. Miller. Large scale kit with many working features. Has flexible treads, rotating turret and cupola, elevating main gun and machine gun, working wheels/sprockets, driver and four combat figures. The kit has never been started. Inventoried 100% complete including decals and instructions. NOTE: there is bug damage to the backing paper only of the decals. The actual transfers are fine.
Plastic Model Kit, Box Condition: Sealed VG+
$62
Still factory sealed and the seal has many splits. This is an early issue from the 1970s and not a recent reissue. The two highly detailed vans feature over 230 parts, vinyl air hose tubing, parts so you can attach the vans to any 1/25 scale semi truck, sliding loading doors, hollow rubber tires, CF decals and more.
Plastic Model Kit, Box Condition: Fair
$29
Rare Arii model from the 1960s. The box is complete and intact but has the obvious stains as shown. The kit inside is often attributed to Airfix and it may be; however, I am suspicious of this as it is a bit cruder in mold quality, so it may simply be a copy of the Airfix kit. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Plastic Model Kit, Box Condition: Good-
$52
Rare, very early issue with "ALL PLASTIC no cutting no sanding" on the box top. Nicely made small scale kit from the 1950s. Molded in gloss silver with a large clear display stand. Never started. Inventoried complete including decals/transfers and instructions. Lincoln was an injection molding firm located in Hong Kong. Model kits were not their primary business but an important sideline and they established an early presence. Major countries of distribution were Hong Kong, Great Britain, New Zealand and Australia. Through specialty hobby shops, they often found their way to the West Coast of the USA. As early as 1956 Lincoln reissued about 16 Hawk kits from the USA, often with 'Picture Gallery' artwork. Although not their primary business, they established quite a line of plastic before discontinuing production in the late 1960s/early 1970s. Many molds moved to Kader, also in Hong Kong, who reissued the line. Some molds eventually found their way to the USA either through ATP (who purchased the excess kit stock when Kader sold out) or IM.
Keep link list open
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216