Revell Boeing 747-122 United Jumbo Jet Cut Away 'Show Off' - With Full Interior, 1/144, H197
Plastic Model Kit, Box Condition: Good
Sold
Rare original issue from 1974. Large model features highly detailed, full interior with spiral staircase, upper lounge, five stewardesses and pilot, copilot and flight engineer. Landing gear can be built up or down. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. Decals are in 'near mint' condition. Revell issued two airliner models in the 'Show-Off' series - this 747 and the TWA L-1011.
Monogram Supermarine Mk IX Spitfire Four Star Issue, 1/48, PA79-98
Plastic Model Kit, Box Condition: Sealed NM
Sold
Still factory sealed but the seal has a split as shown. First issue hardbox dated 1962. This kit is part of a very famous World War II action kit line that Monogram issued in 1/48 scale. Very nicely molded for that time and features retractable landing gear, pilot, four blade prop, 20mm cannon, rotating prop and wheels and a belly tank.
Monogram Curtiss P-40B Tiger Shark (Warhawk) - USAAF / RAF / Chinese AVG Flying Tigers - Four Star Issue, 1/48, PA96-98
Plastic Model Kit, Box Condition: Sealed NM
Sold
Still factory sealed but the seal has split on the left. The actual box is in investment-grade 'mint' condition. First issue hardbox dated 1964. This model is part of a very popular and successful line of 1/48 World War II aircraft that Monogram released through the 1960s. Very nicely molded and detailed model in the best Monogram tradition with very fine raised panel detail, full cockpit, optional position landing gear, optional full or open canopy, pilot, belly tank and working landing flaps. Contains decals for USAF, RAF and AVG Flying Tigers (Chinese).
Lindberg Tow Boat River Queen, 743
Plastic Model Kit, Box Condition: Good+
Sold
Early 1960s small-scale issue that features fantastic Ray Gaedke artwork. No scale is listed, but itmeasures 5.25 inches long when assembled. Full hull, nicely detailed for this size. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. NOTE: a few parts are a different color of plastic. They are from an earlier issue of this same kit.
Hubley 1930 Packard Sport Phaeton, 1/22, 859K-500
Metal Model Kit, Box Condition: VG
Sold
From the 1970s and very well detailed with 137 parts. Includes metal body, chassis, hood, engine and other parts with injection molded details, clear parts, a large tree of chrome plated parts and rubber tires. Features a full rolling chassis just like the real car with excellent engine detail, complete exhaust and suspension, working steering, removable hood, flexible radiator hoses, rubber tires, chrome spoke wheels and working worm-gear steering. Has full interior detail with thin clear windshields and special interior side panels. The kit has never been started. The hardware, plastic parts, chrome and smaller parts are still in the sealed bags. The parts that are not factory sealed (cast metal ones) have been inventoried complete including decals and instructions. In the 1930s Packard was the style leader in America and a beautiful, fast status symbol. Packards were not the most expensive, but were the most desired cars. The 1930s Packards are seen as the high point of the brand.
Williams Brothers Boeing 247 Roscoe Turner Racer or United Air Lines, 1/72, 72-247
Plastic Model Kit, Box Condition: Good
Sold
Often called the first 'Modern Airliner,' the successful Boeing 247 was one the earliest transports with all metal construction, retractable landing gear, de-icers and controllable pitch props. Includes two types of windshields, rubber tires, optional position landing gear and struts. Has full interior detail for two ships: long-range tanks and accessories for Col. Turner's MacRobertson Race Entry, and complete passenger seat interior for United version. Colorful markings for UAL or the Racer shown on the cover. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Airfix Grumman TBM-3 Avenger - CV36 USS Antietam / CV17 USS Bunker Hill, 1/72, 903033
Plastic Model Kit, Box Condition: NM
Sold
1984 issue from the original 1960s molds. Very nicely detailed for that time featuring elevating gun, rotating turret, three crew members, moving ailerons, the correct clear windows, optional position landing gear, underwing rockets and decals for both aircraft. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.
Italeri Corsair F4U-5N Night Fighter - (F4U 5N) US Navy VC-3 Korea 1953 or VMF(N)-513 US Marines 1950 Wonsan Korea, 1/72, 044
Plastic Model Kit, Box Condition: VG
Sold
Nicely molded kit with full cockpit, detailed gear wells, proper 5N antennas and radar and a paint guide and decals for the two aircraft list. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.
Williams Brothers 1931 Hall's Bulldog Racer, 1/32, 32-932
Plastic Model Kit, Box Condition: Sealed Good+
Sold
Still factory sealed. The Bulldog was a famous racing aircraft from the 132 National, Greve and Thompson Air Races. It is widely held that this was the most attractive of the 1930s racers. Features very good fine moldings, very good cockpit and engine detail, hard or rubber wheels, extensive stripe and other decals and painting patterns for an authentic finish.
Entex 1937 Packard V-12 Roadster Coupe - (Ex-Bandai), 1/16, 8499
Plastic Model Kit, Box Condition: Good-
Sold
Rare. Large 1/16 scale model designed with assistance by Packard International. Very highly detailed and builds a rolling chassis just like the actual automobile. Features fully detailed V-12 engine and engine compartment, complete suspension, steerable front wheels, full interior, opening doors and rumble seat, opening and closing rumble seat steps, optional position windows, opening hood, folding luggage rack, optional luggage trunk and choice of convertible boot or top up. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Doyusha U581 U-Boat Type VII-C Submarine - Motorized Diving and Surfacing Operating Model - (Academy), 1/150, UB-2000
Plastic Model Kit, Box Condition: Good+
Sold
Very nice scale model that is designed for water operation. Automatically dives and surfaces while underway. Includes all required metal hardware for motorization. Doyusha did not include the RE-280 motor. Features detailed superstructure, AA guns and deck guns, Seiran aircraft with crane, ballast weights for neutral buoyancy, periscope switch, watertight compartments and more. Includes rigging diagram, decals and instructions. The kit is molded in dark red (below the waterline parts) and silver gray (above waterline parts). The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions. Same kit as the Academy issue, but earlier with better mold quality.
Denis Wenzel Payment Link Only
Plastic Model Kit, Box Condition: Good+
Sold
Special payment use only please.
Pioneer 2 Beech Model 18 'Twin Beech' C-45 USAAF or JMSDF, 1/72, 4 4003
Plastic Model Kit, Box Condition: Good++
Sold
The famous Beech 18 is the most modified US certified aircraft design in existence. Total aggregate flight time of this type is estimated at well over 20 million flight hours! The 18 was the civil model but it saw service in the military as the C-45, AT-7, AT-11, UC-45J and SNB-1. Decals are included for a USAAF version and Japanese Maritime Self-Defense Force from 1956. Well molded withll recessed panel lines. Never started. Factory sealed internal parts bag with decals and instructions.
Academy Three Lockheed PV-1 Venturas, 1/72, 1614
Plastic Model Kit, Box Condition: Sealed VG Exc++
Sold
SALE!! Includes all three factory sealed kits from 1987. Accurately and well molded with all fine recessed panel lines, detailed cockpit, rotating turret and optional position landing gear. Includes decals for the aircraft on the box artwork.
Jo-Han Messerschmitt Me-262 - A-1a / A-2a / B-1a / B-1a/U1 - Major Walter Nowotny / Major Wolfgang Schenk / Major Kurt Welter, 1/72, A-104
Plastic Model Kit, Box Condition: VG
Sold
From the mid to late 1960s and nicely molded with fine detail for that time. Features parts and decals for all four variants, all recessed panel lines, underwing bombs, pilots and cockpit, three-piece canopy, optional position landing gear, clear display stand, painting guide and decals for Major Walter Nowotny, Major Wolfgang Schenk or Major Kurt Welter. The model as never been started. Inventoried 100% complete with all parts, decals and instructions.
Italeri Mig-3 Soviet Fighter, 1/72, 180
Plastic Model Kit, Box Condition: Exc
Sold
Includes decals for 34 IAP, Moscow 1941-42 and 12 IAP, Moscow 1942-43. One aircraft is white finish and one is camo. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.
Italeri LA-5 Fighter, 1/72, 135
Plastic Model Kit, Box Condition: Sealed NM
Sold
Still factory sealed.
#2 Brian Dugan Payment Link Only
Plastic Model Kit, Box Condition: Sealed NM
Sold
Special payment use only please.
Pioneer 2 Fokker D-XXI - Dutch or Finnish Air Forces / Wheels or Skis, 1/72, 3004
Plastic Model Kit, Box Condition: Good+
Sold
Well molded ex-Frog kit with very fine panel lines and no rivet detail for a realistic appearance. Includes optional skis or wheels and nice Dutch and Finnish Decals. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Monogram Speedee-Bilt Spad Pursuit - Flying Scale Model Airplane, G8-100
Wood Model Kit, Box Condition: VG
Sold
Hardbox issue from 1957. For the advanced Monogram collector. Early, completely pre-fabricated multi-media kit featuring pre-colored and die cut balsa wood, precarved balsa, finished Monofoil wing, plastic detail parts (such as cowl and prop) and rubber motor. Designed for rubber free flight or Co2 engine power. Never started. Inventoried 100% complete with all wood and plastic parts, decals and instructions/plans. Before there were plastic models, there were wooden aircraft kits. These usually came in two types - solid and stick and tissue. The solid models were static and usually contained a few blocks of balsa and sometimes a detail part or two. These "Make Wood Look Like Plane" models required a very high level of skill in carving and finishing. The stick and tissue variety were slightly easier to build and provided the ultimate thrill - they could fly when complete with rubber power (and later with free-flight gas and eventually RC). They still required a great deal of skill, so manufacturers sought ways to make model building more accessible to everyone. One idea was pre-carving and/or prefabrication. This raised prices, naturally. Many manufacturers launched lines of 'easy' to build flying models but only Monogram succeeded in making an entire line at an affordable price that would actual fly. The original "Speedee-Bilt" kits were in one-piece two-color boxes. In the early 1950s, shortly before plastic kits were available, Monogram changed to the 'hardbox' with a lithographic slick glued to the top. Speedee-Bilt kits contained die cut and pre painted wooden parts, completely formed airfoil wings, carved wheels and numerous plastic details like cowling, pilot, missiles, prop and whatever was required. Assembly was by detailed full size plans and instructions. Monogram carried the Speedee-Bilt line for several years past it's prime and the advent of plastic kits, a testimony to the quality and popularity.