 |
1/254 #H347-298 Revell
 US CG Cutter Eagle with Sails - 'S' Issue VG++ Injection Molded old | ||
| First issue dated 1957. The box has brilliant gloss and color. There is light edge wear and all four corners are solid. The box would grade higher but there is a tape tear on one long side and a crease on one short side. As with most early Revell sailing ship kits, it is very nicely molded and well detailed. Includes rigging instructions, rigging material and vacuform billowing sails. Molded in three colors - ivory, light wood tan and dark brown wood. The kit has never been started. Inventoried 100% complete including decals, flags and instructions. | |||
 |
1/144 #4728 Revell
Boeing B-52H Stratofortress with GMA-87A Skybolt / AGM-69 SRAM / AGM-28 Hound Dog / ADM-20 Quail Missiles - Bagged No Box Injection Molded old | ||
| Bagged kit - no box. The box is shown for reference only. Very popular ex-Crown molds kit. Excellent model with great extras. Has all recessed panel line detail. Features all the missiles listed and 5 extra clear display stands for each. Has decals for two different aircraft in camo or SAC Anti-Nuclear Flash white and silver. Never started. All parts and paper work are still in the factory sealed bag. The Skybolt was a plan to deliver an ALBM (Air Launched Ballistic Missile) from a B-52 to greatly enhance it's survivability. Skybolt failed 5 of 6 initial tests, but finally was successful. However, the program was canceled due to the availability of the Polaris SLBM. Plans to equip the RAF Vulcan with Skybolt fell through and left with British with no modern nuclear force, causing them to adapt the Polaris SLBM and passing strategic nuclear capability from the RAF to the RN. AGM-28 Hound Dog was a sleek design to help B-52 penetrate thick SAM defenses. Hound Dog could use it's engines to help the B-52 during take off and then could be refueled from the B-52's tanks. This was an important point as the B-52 carried 2 of these missiles at 5 tons each. Hound Dog had a range of 200 to 500 miles (depending on launch height) at Mach 2.0 and an accuracy of one mile at those ranges. The warhead was 4 megatons. SRAM was a nuclear-armed short range missile carried in quantity of 20. SRAM was designed to blast holes in defenses in front of the B-52 and for the final target. Quail was a decoy that would mimic the B-52 with radar reflectors, infrared, radar repeaters and chaff decoys. Quail did reach operational status and operated on some Hound Dog-equipped B-52s. | |||
 |
1/240 #5023 Revell
USS Ward Four Stack Destroyer DD 139 Sealed Exc Injection Molded old | ||
| Still factory sealed. Well detailed, large scale full-hull model measures 15.75 inches long when assembled. The Ward was a Wickes-class 1247-ton destroyer launched in 1918 . After serving as a station ship during the first trans-Atlantic flights of NC-1, NC-3 and NC-4 in 1919, she came back to the Pacific and was decommissioned there in July 1921. In 1920 the ship received the hull number DD-139. On the morning of December 7, 1941, the Ward was on patrol just outside Pearl Harbor. She spotted and sank Japanese Midget Submarine and fired the first US shots of WWII. The Ward saw extensive activity through the war as a transport in most of the major battle areas of the Pacific as a fast transport. During the Leyte operations she took a Kamikaze hit amidship and the crew had to abandon her. The destroyer USS O'Brien had to sink the Ward with gunfire. The Commanding Officer of the O'Brien was William W. Outerbridge, who had been in command of Ward off Pearl Harbor on that fateful day. The date that she was sunk was December 7th, 1944, three years to the day of her opening shots. | |||
 |
1/376 #H329-169 Revell
USS Randall PA224 Attack Transport (Haskell Class) Good++ Injection Molded old | $110 Sale Pending Email for availability. |
||
| 1994 reissue using the original box art. Made from the original molds for the 'S' kit from 1956. Very well detailed and nicely molded. Features deck guns, all masts and booms, barges and landing craft and full decals. The kit has never been started. Inventoried 100% complete including decals, flags and instructions. The USS Randall was on of 57 Haskell Class Attack Transports built for service in and immediately after WWII. The ships were designed to carry troops close to the beachheads, transfer them to landing barges (carried on board) and to supervise the landing operations. Her length was 455 feet and she could handle 1,560 troops and carry 3000 tons of equipment. Through her colorful career she earned many awards. She had to tours in the Pacific including Iwo Jima and Okinawa. After the war she took part in 'Magic Carpet'. Her Hollywood career was in the movie 'Away All Boats' in which she played the Belinda'. | ||||
 |
1/424 #H362-169 Revell
USS Pine Island Seaplane Tender with PBM-5 Mariner Seaplane Fair+ Injection Molded new | ||
| 1993 reissue of the late 1950s 'S' kit. Includes moving cranes, hanger bay and detailed Martin PBM-5 Mariner Seaplane. The Norton Sound molds were modified to create this kit. The kit has never been started. Inventoried 100% complete including decals and instructions. | |||
 |
1/170 #H327-298 Revell
HMS Bounty - 'S' Issue with Glue Good++ Injection Molded old | ||
| The 1st issue of this kit. 'S' Box artwork is dated 1956. Revell's early ship models were remarkably detailed for their time. This kit is no exception and has excellent detail. Kit comes with preformed ratlines and full rigging instructions. Kit even has the original sealed tube of Revell 'S' Cement. Never started and complete. Includes all parts, assembly/rigging instructions, rigging material and flag sheet. NOTE: instructions have a closed tear about 7 inches long. No material is missing and the tear has been stabilized with clear tape. | |||
 |
1/32 #4451 Revell
Mitsubishi A6M5 Zero-Sen - Smithsonian National Air And Space Musuem Issue Good+ Injection Molded old | ||
| Smithsonian issue from 1987. This is a reissue of the original 1967 kit. Large scale (1/32) model features detailed Nakajima Sakae engine with removable cowling, opening canopy to show complete cockpit, movable wheels and propeller, optional position landing gear and pilot figure. The kit has never been started. Inventoried 100% complete including decals and instructions. | |||
 |
1/40 #H260 Revell
Douglas A-1H Skyraider 'Sandy' Vietnam Rescue Support Good+ Injection Molded old | ||
| Since it's introduction in 1946, he venerable Skyraider has been produced in more versions and performed more duties than any other aircraft in US history. This version is the 'Rescue Support Aircraft' that would fly suppression missions while the Jolly Green Helicopters rescued downed pilots in Vietnam. The Skyraiders slower speed and ability to carry an unbelievable amount of firepower made it ideal for this roll. 1973 issue of the classic 1959 'S' kit. Model has many action features: Wings fold, dive brakes operate, canopy slides to show full cockpit, landing gear retracts and cowling comes off to show fully detailed engine. NOTE: kit has minor assembly. Two wing pylons and a drop tank have been assembled. Quality of assembly is 'very good'. There is no other assembly. Inventoried 100% complete with all parts, decals and instructions. | |||
 |
1/32 #4712 Revell
Grumman F-14A Tomcat - VF-1 'Wolfpack' USS Enterprise VG Injection Molded old | ||
| Very large scale kit. Nicely detailed with all fine recessed panel lines, functioning swing wings, working elevators, real rubber tires, detailed cockpits, operating canopy, AIM-54 Phoenix, AIM-7 Sparrow and AIM-9 Sidewinder missiles, detailed landing gear, real rubber tires and high-vis VF-1 markings. The kit has never been started. Inventoried 100% complete including decals and instructions. | |||
 |
1/32 #4764 Revell
Mirage 5 BA (Mirage V) Exc- Injection Molded old | $125 Sale Pending Email for availability. |
||
| Nicely detailed kit from original 1970s molds with removable engine, optional position landing gear, opening canopy and a very large, extensive decal sheet. The kit has never been started. Inventoried 100% complete with all parts, decals and instructions. | ||||
 |
1/70 #5622 Revell
The Thermopylae Clipper Ship with Sails - 3 Feet Long VG- Injection Molded old | ||
| 198 issue of the Cutty Sark's famous competitor. Beautiful box artwork by Jim Griffiths. Highly detailed kit in 1/96 scale. Measures 36 inches long when assembled. Has full billowing vacuform sails and complete running and standing rigging instructions; can also be built without sails if you wish. Inside, the kit has never been started and is as it left the factory. The parts are all still in the factory sealed bags. Includes assembly instructions, rat lines, full rigging instructions, billowing sails, decals, flag sheet, rigging lines and metal chain. | |||
 |
1/144 #0175 Revell
Lufthansa Boeing 747 Jumbo Jet CutAway With Full Interior VG- Injection Molded old | ||
| 1981 Revell of Germany issue - not the more recent reissue. Highly detailed with full interior, spiral staircase, upper lounge, five stewardesses and pilot, copilot and flight engineer. Never started. All parts and paperwork is still in the factory sealed internal bag. | |||
 |
1/144 #H242 Revell
American AL 727-100 Astrojet - Lodela Issue Sealed Exc Injection Molded old | ||
| Still factory sealed but the seal has drawn the box concave. Lodela issue. Landing gear can be built up or down and the rear passenger loading ramp ('Airstair') goes up and down. Includes very colorful American Airlines decals. | |||
 |
1/400 #H342 Revell
US Navy T2-SE (T-2) Oiler Mission Capistrano / Buenaventura / San Fernando / Santa Clara Seaked Exc++ Injection Molded old | ||
| Still factory sealed but the seal has drawn the lid slightly concave. This is the 1997 reissue using the original 1964 molds. Very nicely detailed military tanker full hull kit for that time. Includes decals for four different tankers of the the class. | |||
 |
1/48 #H227-98 Revell
Sikorsky H-19 Rescue Helicopter - 'S' Kit Exc++ Injection Molded old | ||
| First issue of this kit dated 1955 with 'S' boxart by Richard Kishady. The box is in exceptional 'Excellent++' condition with like-new color and gloss, four solid corners and no price tag or tape marks or residue. Kit features detailed cockpit and two pilots, rotating main and tail rotors, detailed engine and optional position clam-shell nose doors, winch and 'downed' pilot and clear Revell 'Globe' stand. Never started. The parts are still sealed in the factory internal bag. With decals and instructions present. | |||
 |
1/144 #04258 Revell
Fokker 100 - Swissair or KLM VG++ Injection Molded new | ||
| Nicely molded 1/144 kit with decals for both air lines. Features recessed panel lines, optional position landing gear, detailed Rolls Royce engines and more. The kit has never been started. Internal factory sealed bag including decals and instructions. | |||
 |
1/72 #H241 Revell
Heinkel He-115 C-1 - 3/Ku.Fl.Gr 106 Luftflotte 2 France Late 1940 Night Operations / 1/Ku.Fl.Gr 906 Luftflotte 5 Pori Finland 1942 NM Injection Molded old | ||
| 1977 Revell of Germany issue. Very nicely molded with very fine raised panel lines and recessed control surfaces. This issue has optional parts for two different nose and gun configurations. One has a gondola with a small 15mm cannon; the other has a different gondola with a large 20mm long barrel cannon. With a crew of four. Has markings for the two aircraft listed. The kit has never been started. Inventoried 100% complete including decals and instructions. | |||
 |
1/32 #H298 Revell
Junkers Ju-87B Stuka 'The Snake' VG+ Injection Molded old | ||
| Earlier issue dated 1969. Large 1/32 scale with very good detail. Features full Jumo engine with removable cowling and full interior with sliding canopy. Never started. Inventoried 100% complete with all parts, decals and instructions. | |||
 |
1/32 #4472 Revell
F4U-1D Corsair ' Sun Setter'- Smithsonian Issue Sealed Exc+++ Injection Molded old | ||
| 1986 issue is still factory sealed. Kit features detailed Pratt and Whitney R-2800 engine and removable cowling, opening canopy and complete cockpit, folding wings, clear landing lights, optional position landing gear and movable wheels and propeller. | |||
 |
1/32 #H284 Revell
Messerschmitt Bf-109F - Geschwader Kommodore- JG51 VG++ Injection Molded old | ||
| 1971 two-piece box issue in big 1/32 scale. Has plenty of action features- fully detailed engine, removable panels, full cockpit, moving control surfaces, rotating wheels and props and retracting/extending landing gear. The model has never been started. Inventoried 100% complete with all parts, decals and instructions. | |||
Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Page
© 2005 -
Alan Bussie
Ecommerce Consulting :: eBay Alternative
Nintendo Famicom console for sale
email
old site