Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale.

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

  ITC Model Kits

ITC Curtiss Condor - Eastern Air Service or Antarctic Expedition II, 1/84, 3724

Plastic Model Kit,   Box Condition: Good++

$39   

ITC was the model manufacturing arm of the giant Ideal Toy Company. Ideal only made plastic models for a very short time in the late 1950s and early 1960s before all production was discontinued. Luckily, they made some great subjects. This Condor is molded in the correct bright orange with blue-tinted clear windows and base. Includes decals for both variants. Never started. Inventoried 100% complete with all parts, decals and instructions.

ITC Dornier Do-X Flying Boat - (DoX), 1/156, 3721

Plastic Model Kit,   Box Condition: VG

$59   

Famous German Flying Boat of the 1930s. Dornier dreamed that this huge aircraft would become a trans-oceanic airliner. Passenger traveled in ocean-line like luxury. A tour of South and North American was conducted, but orders never materialized due to excessive fuel consumption and a lack of power. The kit is molded in gloss gray and clear. It has never been started. Inventoried complete with all parts and includes decals and instructions.

ITC Stinson Model T Tri-Motor - Eastern Air Service, 1/61, 3722

Plastic Model Kit,   Box Condition: VG

$149   

Rare. This famous early 1930s transport was the primary competition of the Ford Tri-Motor and saw widespread use. It was the idea of E.L. Cord, the money behind the aircraft and the owner of the Auburn-Cord-Duesenberg automobile company. Cord also owned Lycoming, the engines that ended up on the final product. Another of Cord's companies was Century Airlines, which naturally used the aircraft. Century later became part of American Airlines. The Model T was used by many other airlines including Eastern, Delta, Braniff, TWA, United and American when they rolled up Century. The Tri-Motor carried 10 passengers, baggage and of course the mail, which was critical to early airline revenue. The aircraft proved successful and economical to operate. Includes clear windows, interior with passengers and pilots, Eastern Air Service decals and clear blue-tinted display stand. Never started. Inventoried 100% complete with all parts, decals and instructions. The clear parts and decals are still in the factory sealed bag.

ITC Piasecki VZ-8P or 59L Airgeep Aerial Jeep, 1/35, 3674-98

Plastic Model Kit,   Box Condition: Good+

$75   

Well detailed kit from about 1960. The Airgeep was made for the US Army to increase mobility by combining the best of a jeep and helicopter. It traveled at up to 150 miles per hour and could carry several fully equipped troops. Includes three crew members. Has decals for the US Army prototype. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. NOTE: there is light bug damage on the instructions and decals. The decal damage is on the backing paper only, all transfers are undamaged.

ITC Martin MB-2 Bomber, 1/78, 3725-98

Injection_Molded,   Box Condition: VG++

$28   

From the late 1950s/very early 1960s. It is an excellent kit for that time and is still popular today. Molded in dark green and clear. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. The famous first bomber to sink a battleship under any circumstances. Billy Mitchell arranged to have the ex-WWI German Battleship Ostfriesland used as target practice for for 6 MB2s, and the ship sank in 25 minutes.

ITC Grumman J2F Duck, 1/50, 3727-98

Plastic Model Kit,   Box Condition: Good+

$34   

Well detailed kit for its time. Never started. Inventoried 100% complete with all parts, decals, transparent ice blue display stand and instructions. NOTE: the decals have micro-cracking and light bug damage. The box displays well but has a small area of missing litho on the left side corner.

ITC Stinson Model T Tri-Motor - Eastern Air Service, 1/61, 3722

Plastic Model Kit,   Box Condition: VG++

$165   

Rare. This famous early 1930s transport was the primary competition of the Ford Tri-Motor and saw widespread use. It was the idea of E.L. Cord, the money behind the aircraft and the owner of the Auburn-Cord-Duesenberg automobile company. Cord also owned Lycoming, the engines that ended up on the final product. Another of Cord's companies was Century Airlines, which naturally used the aircraft. Century later became part of American Airlines. The Model T was used by many other airlines including Eastern, Delta, Braniff, TWA, United and American when they rolled up Century. The Tri-Motor carried 10 passengers, baggage and of course the mail, which was critical to early airline revenue. The aircraft proved successful and economical to operate. Includes clear windows, interior with passengers and pilots, Eastern Air Service decals and clear blue-tinted display stand. Never started. Inventoried 100% complete with all parts, decals and instructions.

ITC Piasecki VZ-8P or 59L Airgeep Aerial Jeep, 1/35, 3674-98

Plastic Model Kit,   Box Condition: VG+

$65   

Well detailed kit from about 1960. The Airgeep was made for the US Army to increase mobility by combining the best of a jeep and helicopter. It traveled at up to 150 miles per hour and could carry several fully equipped troops. Includes three crew members. Has decals for the US Army prototype. Never started. NOTE: missing three ground troops, ground base and #9, very small foot pedals. The pedals can be easily made from strip plastic. Includes decals and instructions.

ITC McDonnell XV-1 Convertiplane, 1/32, 3729-149

Plastic Model Kit,   Box Condition: Good-

$29   

Builder kit only, please read carefully. ITC first issue in hardbox. Large 1/32 scale kit. Never started and inventoried with all parts present with decals and instruction. NOTE: right window frame is broken; it is a clean break and an easy fix. However, there is a chip of plastic approximately 1cm x .5cm missing off the fuselage. This unique aircraft was a joint development by the Army and Air Force as a rescue and recon plane. It took off vertically as a helicopter and flew at 200 mph. Jets drive the rotors and a piston engine drives the pusher prop. The jets for the rotors are pressure types located in the blade tip.

ITC Dornier Do-X Flying Boat - (DoX), 1/156, 3721

Plastic Model Kit,   Box Condition: Exc

$85   

Famous German Flying Boat of the 1930s. Dornier dreamed that this huge aircraft would become a trans-oceanic airliner. Passenger traveled in ocean-line like luxury. A tour of South and North American was conducted, but orders never materialized due to excessive fuel consumption and a lack of power. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

ITC Halibut SSGN 587 Cam-A-Matic Submarine - (Electric Powered Diving Motorized Regulus Sub), 1/175, 3660-998

Plastic Model Kit,   Box Condition: Good

$1250   

From 1960. This model is the zenith of the ITC Design and Engineering Team, and maybe of all operational plastic model kits. It is not only rare but is considered the most complicated operating model ever produced. The large 24.75 inch submarine sails from the power of a large electric motor driving twin geared propellers. It changes headings, dives, surfaces, and a Regulus II missile comes out of the hanger and launches...all automatically. The engineering on this kit is fantastic and a major break-through for its time. The model worked, and did work well, but was certainly not a toy for inexperienced model builders. The high price ($9.98) and difficulties that youngsters had with assembly and operation made for a short production run. The fact the ITC left the model business for good shortly after releasing the kit contributed to the scarcity as well. The boxtop grades 'good' with four solid original corners and excellent color. It would grade higher than 'good' but there is red spray paint on the right short side and a very small, fine amount near it on the box top. There is light to medium general wear as shown. Inside, the kit is in excellent condition and as new. It has never been started. All the parts that were in factory sealed bags are still factory sealed. The hull halves and battery holder were never sealed and are in 'new' condition. The blue display cardboard is all present and in 'excellent' condition. The decals and instructions are 'excellent' as well.

ITC F-108 Rapier with Booster and Launching Platform, 1/89, 3663-149

Plastic Model Kit,   Box Condition: VG+++

$1475   

Very rare kit from 1960. The box grades 'very good+++' with excellent gloss and color, four solid corners, no price tags, factory tape marks only with no tape tears or any litho tears. The only flaws are light general wear, slight creasing, very slight edge and corner wear, light yellow stains from the factory tape and a very light 3.5 cm x .5cm discoloration on one long side. The box bottom tray is exceptional as well. Very interesting kit with raised and recessed panel line detail. Comes with the proposed operating zero-length launching system and fall-away rocket booster. The booster is detachable from the F-108 (if you wish). The aircraft has moving canards and the launcher elevates to launching position then back to storage position. Molded in the correct ivory plastic with metal parts for the elevation mechanism. The kit includes the correct decals and instructions as well. The decals, spring and two metal shafts are still packed in the sealed ITC factory bag. The instructions are excellent with typical yellowing, factory folds only and no tears or edge wear. Inside, the kit is in factory-new condition. It has not been started. It has been inventoried complete with every plastic part, metal part, decals and instructions and even the Ideal Quality 'Inspection Slip.' The F-108 was a proposed interceptor and escort for the B-70 tri-sonic bomber and ITC was quick to capitalize on this new design. The kit was produced quickly and the rest is history. When the F-108 hit the shelves, it did not look like the design. Photos had been released by the US Air Force of the mock-up that were not available when ITC made the molds. This and the cancellation of the F-108 program lead to a very short release life for the Rapier and ITC quickly pulled it from the shelves. NOTE: shipping insurance is required.

ITC Halibut SSGN 587 Cam-A-Matic Electric Powered Diving Motorized Submarine - (Regulus Sub), 1/175, 3660-998

Plastic Model Kit,   Box Condition: Exc

$1800   

From 1960. This model is the zenith of the ITC Design and Engineering Team, and maybe of all operational plastic model kits. It is not only rare but is considered the most complicated operating model ever produced. The large 24.75 inch submarine sails from the power of a large electric motor driving twin geared propellers. It changes headings, dives, surfaces, and a Regulus II missile comes out of the hanger and launches...all automatically. The engineering on this kit is fantastic and a major break-through for its time. The model worked, and did work well, but was certainly not a toy for inexperienced model builders. The high price ($9.98) and difficulties that youngsters had with assembly and operation made for a short production run. The fact the ITC left the model business for good shortly after releasing the kit contributed to the scarcity as well. This kit is unusual in that it never had the common 'Seen on TV Maverick' sticker on the box top. The box is not perfect, but is the best I have seen. It has factory-new color and gloss, no fading or stains, one price tag on a long side and two small pieces of clear tape on each long side. Two corners are solid, and the other two have been properly and expertly repaired from the inside. There is light general wear as shown. Inside, the kit is in exceptional, factory-new condition. It has never been started. All of the parts that were factory sealed are still in the factory sealed bags. The two hull halves and batter holder are still in place in their cardboard display. The blue display cardboard is 100% present and in near mint condition as well. The instructions are in superb near-mint condition as well, with none of the usual yellowing.

ITC The Clermont Robert Fulton 1807, 1/124, 3718-198

Plastic Model Kit,   Box Condition: VG+

$129   

Hard-to-find early 1960s kit from the Ideal Toy Company. Well detailed and large scale full hull kit. 19 inches long when built. Never started. Inventoried with all parts, flag sheet and instructions present.

ITC Santa Maria and Mayflower - Precision Miniatures Historical Ship Models, 3756-40

Plastic Model Kit,   Box Condition: Poor

$18   

Very nicely molded, small scale kits. Contains both ships. The Mayflower and the Santa Maria are about 3 inches long when assembled and features full hulls, display stands billowing sails and rigging diagrams. The kits has never been started. Inventoried 100% complete including decals and instructions.

ITC F-108 Rapier with Booster and Launching Platform, 1/89, 3663-149

Plastic Model Kit,   Box Condition: Exc++++

$2250   

Very rare kit from 1960 in exceptional condition. The box is superb with factory gloss and color, four solid corners, no price tags, factory tape marks only with no tape tears or any litho tears. It is free of creases and 'dishing.' The only wear is a very small amount of corner and edge wear and light scuffs. The box bottom tray is exceptional as well. Very interesting kit with raised and recessed panel line detail. The kit comes with the proposed operating zero-length launching system and fall-away rocket booster. The booster is detachable from the F-108 (if you wish). The aircraft has moving canards and the launcher elevates to launching position then back to storage position. Molded in the correct ivory plastic with metal parts for the elevation mechanism. The kit includes the correct decals and instructions as well. The decals, spring and two metal shafts are still packed in the ITC factory bag. The instructions are excellent with typical yellowing, factory folds only and no tears or edge wear. Inside, the kit is in factory-new condition. It has not been started. It has been inventoried complete with every plastic part, metal part, decals and instructions and even the Ideal Quality 'Inspection Slip.' The F-108 was a proposed interceptor and escort for the B-70 tri-sonic bomber and ITC was quick to capitalize on this new design. The kit was produced quickly and the rest is history. When the F-108 hit the shelves, it did not look like the design. Photos had been released by the US Air Force of the mock-up that were not available when ITC made the molds. This and the cancellation of the F-108 program lead to a very short release life for the Rapier and ITC quickly pulled it from the shelves. NOTE: shipping insurance is required.

ITC Grumman J2F Duck, 1/50, 3727-98

Plastic Model Kit,   Box Condition: NM-

$65   

Well detailed kit for its time. Never started. 100% inventoried complete with all parts, decals, transparent ice blue display stand and instructions and plans present.

ITC Spirit of St. Louis and Wright Brothers Flyer I, 1/110, C-513-50

Plastic Model Kit,   Box Condition: VG+

$18   

Ringo issue - contains both kits. Very nicely molded for small scale models. These were originally ITC models. Ringo was the name ITC used to clear the warehouse of plastic kits. The kit has never been started. Internal factory sealed bag including instructions. Ringo did not put decals with the vast majority of kits.

ITC PT-76 Russian Amphibious Tank - Motorized, 1/32, 3810-249

Plastic Model Kit,   Box Condition: Exc

$125   

Hard to find kit from the late 1950s/very early 1960s. Fully motorized. This kit has not been started. The parts are either still in the factory sealed bag or inventoried 100% complete with all parts, decals and instructions. NOTE: One gun barrel 1/2 is broken in 1/2, but both parts are there and the break is clean.

ITC Schooner Waterwitch Yacht, 3702-8 500

Plastic Model Kit,   Box Condition: Poor

$145   

Very rare ITC/Ideal kit from late 1950/1960. Large scale model measures 27.5 inches long when assembled. Includes 123 parts molded in white and tan, 8 vacuum-formed sails, rigging material, building instructions and rigging instructions. Could be converted to radio control. NOTE: the deck had a 1.25 inches long crack that has been fixed. The repair work is of excellent quality. The portholes, screw, bell and prop have been painted. Quality of paint is good; very little paint was used. No other assembly or painting. The kit is 100% complete with all parts, flag sheet and instructions.