Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale.

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

  Entex Model Kits

Entex 1804 Trevithick The World's First Steam Locomotive - With Display Case, 1/38, 8200

Plastic Model Kit,   Box Condition: VG

$49   

The model is from the 1980s. Older but very nice kit that is well detail and molded in wood brown, silver, black and with brass rods. Includes clear display case and display base. The kit has never been started. The parts are still in the internal factory sealed bags and includes instructions. The world's first locomotive was the 1804 Trevithick. On February 13 of that year, Richard Trevithick's high pressure steam locomotive pulled five wagons carrying 10 tons of iron and 70 men on the Penydaren Tramroad from Methyr to Abercynon, Wales. The nine miles was covered in four hours and five minutes but much time was lost cutting down several trees and removing some large rocks. At times they reached the unheard of speed of five miles per hour! The performance won a 500 Pound wager for the train's owner, Mr. Samuel Homfrey and proved for once and for all that smooth steel wheels could obtain traction on a smooth iron rail. Until this day, conventional wisdom insisted that only geared wheels running on geared track would be able to pull any load up the slightest grade.

Entex 1906 Rolls Royce Silver Ghost, 1/16, 8467

Plastic Model Kit,   Box Condition: VG

$95   

Very nicely detailed and molded large-scale kit with over 150 parts. Features detailed engine and engine compartment, complete interior, optional position folding hood, detailed suspension and exhaust, hand brake and linkage, running board tool box and more. Molded in black, gray, clear, wood brown, brass plating and with rubber tires. The kit has never been started. The parts are still in the internal factory sealed bags and includes stickers and instructions.

Entex Display Case, 9901

Plastic Model Kit,   Box Condition: VG

$18   

Measures 14.5" long, 5" wide and 5.875" high. Dimensions given are interior dimensions. Does NOT include base; contains five clear panels only. All five clear sides are in excellent condition and in plastic bags for protection. Includes hardware and instructions.

Entex 1939 Jaguar SS100, 1/16, 8500

Plastic Model Kit,   Box Condition: VG++

$49   

Excellent builder, please read below. Hard-to-find 1970s kit, likely from original Bandai molds. Very large 1/16 scale and highly detailed. Molded in chrome, black, silver, clear and red with rubber tires and real metal hood hinges. Features detailed engine with transmission and full ignition wiring, rolling chassis build up like the actual automobile, complete suspension and exhaust, steerable front wheels, full engine compartment with opening hood, full interior with excellent dash detail, separately molded doors, brake drums, wire wheels, optional top or boot and more. NOTE: this kit has minor assembly. The windshield assembly has been built but not glued to the body. Quality of work is 'excellent' and there is no other assembly and zero painting. Most parts are still in the internal factory sealed bags; those that are not have been inventoried complete. Includes decals and instructions.

Entex Boeing 707-32B (VC-137) - (707) TWA or Air Force 1 Presidential Aircraft - with Clear Parts and Interior Details, 1/100, 8519

Plastic Model Kit,   Box Condition: Sealed NM

$125   

Still factory sealed. Big 1/100 scale model of excellent quality. Features recessed panel lines, good cockpit and inner engine details, optional clear engine nacelles as well as an optional clear cockpit section to show the detailed flight deck. Very large and colorful Air Force One and TWA decal sheet.

Entex 1913 Ford Model T Delivery Van Coca Cola - with Real Wood Parts- Templeton & Sons Taxidermists / The Texas Company (Texaco) / Carnation Milk, 1/16, 8497

Multimedia Model Kit,   Box Condition: Good-

$125   

Very highly detailed and well molded kit from the 1970s. From original Bandai molds. Builds up a rolling chassis just like the real vehicle. Features detailed engine with ignition wiring, full engine compartment with hoses and wiring, removable hood, full suspension, driveline and exhaust detail, steerable wheels, complete interior (down to the speedometer cable and individual clutch, brake and accelerator pedals and levers, a large sheet of micro wood trim so that the wooden parts of the kit can be accurately represented with in-scale wood grain, opening rear cargo doors, full van interior, opening passenger and driver doors, flexible fuel lines, headlight wiring, choice of decals and much more. Molded in gloss black, gloss ivory, brass plate, wood tan, clear, green tinted clear (sunshade) and with real rubber tires, rubber wires and cables, small metal parts and details and a sheet of precut in-scale grain wood. The kit has never been started. The parts that were factory sealed are still in the internal factory sealed bags. The parts that are not sealed have been inventoried 100% complete including decals and instructions.

Entex RMS Lusitania Ocean Liner - (ex-Revell), 1/350, 7002

Plastic Model Kit,   Box Condition: VG+

$239   

Rare. Very highly detailed full hull kit that is 28 inches long. Molded in black, white, tan, clear and gold-plated. From original Revell molds, re-released in the 1970s by Entex. This Entex issue is an earlier release than the Gunze Sangyo issue with slightly better mold quality. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Entex Nippon Maru Four Masted Bark - Training Ship, 1/400, 8475-250

Plastic Model Kit,   Box Condition: Sealed NM

$29   

Still factory sealed. Very nicely detailed full hull kit. Can be built as waterline or full hull and features detailed deck and fittings, preformed rat lines, billowing vacuform sails and full rigging instructions.

Entex Douglas C-47 (DC-3) Gooney Bird - Landing Gear or Skis, 1/100, 8562

Plastic Model Kit,   Box Condition: VG+

$38   

Very nicely detailed and well molded kit. Features regular landing gear or optional skis. Very highly detailed cockpit for 1/100 scale. Colorful decals for two aircraft including Normandie invasion stripes. The kit has never been started. Internal factory sealed bags including decals and instructions.

Entex F-18 (F/A-18) Hornet - US Navy or Marines Prototype Markings, 1/72, 8531

Plastic Model Kit,   Box Condition: Exc++

$16   

Very cleanly molded and well detailed kit. Features very fine raised panel lines and recessed control surface lines, good cockpit detail, optional position landing gear and wide variety of loadout options with 2 long range tanks, AIM-9 Sidewinder and AIM-7 Sparrow missiles as well as iron bombs. The model as never been started. The parts are either still in the factory sealed bag or have been inventoried 100% complete with all parts, decals and instructions.

Entex Rockwell B-1A 'Bone' - Strategic Bomber, 1/144, 8505

Plastic Model Kit,   Box Condition: VG++

$36   

Rare 'A' supersonic variant as the B-1 was originally designed. Wings swing as on the real aircraft. Includes detailed landing gear and display stand. The kit has never been started. Internal factory sealed bag including decals and instructions.

Entex Dornier Do-X 1929 Flying Boat - (DoX), 1/144, 8516

Plastic Model Kit,   Box Condition: VG+++

$95   

Famous German Flying Boat built in 1929. Dornier dreamed that this huge aircraft would become a trans-oceanic airliner with passengers traveling in ocean liner-like luxury. A tour of South and North American was conducted, but orders never materialized due to excessive fuel consumption and a lack of power. Total load was 170 passengers and crew, and the 12 engines developed 7200 HP. Former Otaki molds with over 110 parts, and a 13 inch wingspan. Never started. Factory sealed bag or inventoried 100% complete with all parts, decals and instructions.

Entex 1939 Jaguar SS100, 1/16, 8500

Plastic Model Kit,   Box Condition: VG

$79   

Hard-to-find 1970s kit, likely from original Bandai molds. Very large 1/16 scale and highly detailed. Molded in chrome, black, silver, clear and red with rubber tires and real metal hood hinges. Features detailed engine with transmission and full ignition wiring, rolling chassis build up like the actual automobile, complete suspension and exhaust, steerable front wheels, full engine compartment with opening hood, full interior with excellent dash detail, separately molded doors, brake drums, wire wheels, optional top or boot and more. The kit has never been started. Internal factory sealed bags including decals and instructions.