Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale.

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Blue Rider Junkers J-2 - Bagged, 1/72

Vacuform Model Kit

Sold   

Possibly the only model ever made of this landmark aircraft. Features excellent vacuform moldings of higher quality than many injection molded kits. Includes cast metal details, extruded airfoil strut material, decals and full cockpit. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. The J-2 was aerodynamically the cleanest and elegant aircraft every produced at the time of the first flight in July 196. Only 6 were built and only two in the configuration of this kit. Unfortunately, too much emphasis was put on aerodynamic cleanliness and the aircraft was over-weight. The direct descendants of this aircraft are the Junkers D-1, Ju-52 transport and Ju-87 dive bomber.

Esoteric Boeing F3B-1 Fighter 3, 1/72, NAF-12

Vacuform Model Kit

Sold   

The F3B was a complete redesign of the less successful F2B-1. F3Bs began to replace F2Bs only a few months. The US Navy ordered 74 F3Bs and they served from 1928 till 1931. The aircraft was very popular with crews, so it continued in use for many years after it left squadron service. While flying as a 'hack' aircraft, they acquired wheel pants and Townend cowl ring - these parts are also included in the kit. Esoteric was known for production perhaps the finest vacuform kits. The mold quality is higher than most injection molded kits. Every part needed to complete the kit is included - down to the interior. Very well molded and highly detailed with metal parts - decals - shaped struts and full instructions. Never started and 100% complete with all parts, instructions and decals.

VLE Models Fokker T-2 Army Non-Stop Coast To Coast Flight - Bagged, 1/72

Vacuform Model Kit

Sold   

Very accurate and high quality model of the very first aircraft to fly nonstop across North America. The flight was sponsored by the US Army and took off on May 2, 1923 and landed 26 hours and 50 minutes later. I highly recommend reading a history of this flight, the previous attempt and preparations. It is a credit to the Army Air Service, the pilots and the design of the aircraft. Kit features very fine moldings, metal and resin details, and full color decals for the Coast to Coast Aircraft. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Esoteric Martin BM-1 / BM-2 Torpedo Bomber - Bagged, 1/72, NAF-10

Vacuform Model Kit,   Box Condition: Sealed

Sold   

Still factory sealed. Esoteric was known for making perhaps the finest vacuform kits. Every part needed to complete the kit is included - down to the interior. Very well molded and highly detailed with many metal parts - full decals - shaped struts and full instructions. The BM-1 was the follow-on to the Martin T4M as the XT5M-1. The BM-1 and BM-2 were externally identical and 32 of each were produced. They remained in front line service until 1937. Some remained in the utility role until 1940 when the last ones were scrapped.

Esoteric Vought O3U-3 / SU Corsair Two - Bagged, 1/72, NAF-11

Vacuform Model Kit,   Box Condition: Sealed

Sold   

Still factory sealed. The O3U-3/SU was developed from the O3U series and was a significant improvement over the first Corsair. Seventy-six were produced as -3s and served as observation/float planes for the battle fleet. Sixty-five of the -SU variants were produced and saw a variety of rolls with the Navy and Marines. This was Vought's last production biplane and it was loved by crews. They were taken out of fleet service in 1941 but served in various rolls before being scrapped during mid-WWII. Esoteric was known for making perhaps the finest vacuform kits. Every part needed to complete the kit is included - down to the interior. Very well molded and highly detailed with metal parts - decals - shaped struts and full instructions.

Palmer Chevrolet Corvette Sting Ray Motorized, 1/32, 1110

Plastic Model Kit,   Box Condition: Sealed Exc++

Sold   

Still factory sealed. Easily adapted to slot car racing. Kit includes car body molded in red, details molded in silver, rubber tires, electric motor, metal hardware, electric motor and decals. The instructions are under the car.

Naval Works Flower Class Corvette, 1/700

Resin Model Kit,   Box Condition: VG+

Sold   

Waterline resin small-scale ship kit. Older but still nicely molded. The kit has never been started. The parts are still in the internal factory sealed bags and includes illustrated instructions.

Regia Marina Navigatori Class Destroyers / Luca Tarigo / Lanzerotto Malocello / Leone Pancaldo / Antonio Da Noli / Ugolino Vivaldi etc, 1/700, RM06

Resin Model Kit,   Box Condition: Exc

Sold   

Hard-to-find. Features excellent resin waterline cast hull and many cast resin details. The instructions name all the ship in the class, have an excellent assembly illustration and include dazzle camo schemes. The kit has never been started. The parts are still in the internal factory sealed bags and includes instructions.

Regia Marina Capitani Romani Class Light Cruiser Attilio Regolo / Scipione Africano / Pompeo Magno, 1/700, RM13

Resin Model Kit,   Box Condition: Exc

Sold   

Hard-to-find. Resin waterline kit with very good detail, extensive illustrated instructions and an extensive camo paint guide for the three ships listed. The kit has never been started. The parts are still in the internal factory sealed bags and includes instructions.

Lindberg North Atlantic Fishing Trawler - (Ex-Pyro and Life-Like), 1/96, 70898

Plastic Model Kit,   Box Condition: Sealed VG

Sold   

Still factory sealed. From quality ex-Pyro molds dated from the early 1960s. Large 17" kit when assembled. Very well detailed for it's time with railings, detailed deck and fittings, rigging thread and detailed rigging diagrams.

Ventura Spitfire PR Mk.XI - USAF or RAF, 1/72, V0205

Plastic Model Kit,   Box Condition: Exc

Sold   

Limited issue injection molded kit. Features injection molded main parts with all fine recessed panel lines, two vacuform canopies and decals for both aircraft listed. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Monogram Republic F-105D Thunderchief - Blue Box Issue, 1/72, PA149-100

Plastic Model Kit,   Box Condition: Fair++

Sold   

Second issue of this kit and an ideal builder. Blue box is dated 1966. Nice quality kit from the older 'Four Star' molds. Includes drop tanks, bombs, opening canopy, pilot figure, ground crewman and boarding ladder. Molded in green, light gray and clear. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. The box has heavy wear but the kit inside is as new.

Hasegawa OV-10A Bronco - Bagged Kit, 1/72

Plastic Model Kit,   Box Condition: No Box

Sold   

Bagged kit - no box. The box is shown for reference only. The kit has never been started and is still sealed in the factory bag. Clear parts are present also. The instructions are photocopied and there are no decals.

Academy Grumman TBF-1 Avenger - USN, 1/72, 1651

Plastic Model Kit,   Box Condition: Exc

Sold   

From 1987. Very nicely molded kit. Features very fine recessed panel lines, detailed cockpit, optional position landing gear and rotating turret with elevating gun. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Monogram Republic F-105D - Blue Box Issue, 1/72, PA149-100

Plastic Model Kit,   Box Condition: VG++

Sold   

Second issue of this kit. Blue box is dated 1966. includes drop tanks, bombs, opening canopy, pilot, ground crewman and boarding ladder. Very finely molded and detailed kit with traditional high Monogram quality. The model has never been started. The parts are either still in the factory sealed bag or have been inventoried 100% complete with all parts, decals and instructions.

Eduard Profipack Hanriot HD.2 (HD-2 HD-1), 1/48, 8034

Multimedia Model Kit,   Box Condition: Good++

Sold   

Very high quality kit. Features many photo etched parts, excellent injection molded parts with very fine detail, resin parts and decals for multiple aircraft. This kit has never been started. All parts are still in the factory sealed bags. Complete with decals and instructions.

Hawk RE-8 (Re8) - Solid Wood Aircraft Model, 1/48, 56

Wood Model Kit,   Box Condition: Fair-

Sold   

For the advanced Hawk collector. Hawk was one of the few manufactures making wooden kits to a constant scale of 1/48. However, the company was innovative as it quickly included injection molded accessories. This kit dates from 1946 and contains profile precarved wooden main aircraft parts, injection molded wheels, prop, machine gun, wooden stock as needed, metal seat, sandpaper, full color decals and full size well-detailed plans. The model has not been started. The parts are either in factory sealed bag(s) or inventoried 100% complete with all parts, decals and instructions. NOTE: the plans are intact but stained for about 2" across the top

JGMT Caudron 635 Simoun, 1/48, 48AR19

Multimedia Model Kit,   Box Condition: NM

Sold   

Excellent limited edition kit. Features main airframe parts in professional grade castings with recessed panel lines, detailed cockpit and interior, clear canopy (2), metal prop blades and paint guide and full decals for multiple aircraft. The kit has never been started. The parts that were factory sealed are still in the sealed bags. The parts that were not factory sealed have been inventoried complete including decals and instructions.

JGMT Caudron C.720 (C720), 1/48, 48AR20

Multimedia Model Kit,   Box Condition: NM

Sold   

Excellent limited edition kit. Features main airframe parts in professional grade castings with recessed panel lines, a fret of photoetched parts, detailed cockpit, clear canopy (2), paint guide and full decals. The kit has never been started. The parts that were factory sealed are still in the sealed bags. The parts that were not factory sealed have been inventoried complete including decals and instructions.

Eduard Grumman F6F-3 Hellcat, 1/48, 8433

Plastic Model Kit,   Box Condition: Exc+

Sold   

Excellent kit. Finely molded with all recessed panel lines, highly detailed cockpit and engine, full wheel wells, separately molded ailerons, elevators, rudder and wing flaps, optional position canopy, drop tank and more. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.