Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale.

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

North River Scale Models Private Armed Schooner 'Lively' of Baltimore 1813 - Plank On Frame Wooden Ship Kit, 1/48, NR91-1001

Wood and Metal Model Kit,   Box Condition: Exc+

Sold   

Very highly detailed and nicely engineered kit. Features completely laser cut plywood keel and frames, many other laser cut hardwood parts, stripwood and dowels as needed, wood, brass and cast metal fittings, full instruction book, full size plans with detail drawings and more. Most parts are in internal factory sealed bags and those that were not factory sealed have been inventoried 100% complete including instructions and plans.

Airfix Avro Lancaster, 1/72, 1418

Plastic Model Kit,   Box Condition: Good-

Sold   

Late 1950s issue second release. Classic model with many action features. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Renwal Golden Lola 70, 1/24, 108-200

Plastic Model Kit,   Box Condition: Good+

Sold   

Rare kit from the 1960s. This model has a factory gold-plated body, which is in remarkable 'excellent+' condition and is protected for packing. Features good detail, engine, very good front and rear suspension, racing cockpit, complete exhaust and more. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Revell US Army Tactical Missiles Little John and Dart with Launchers - 'S' Issue, 1/40, H1812-98

Plastic Model Kit,   Box Condition: Fair+

Sold   

First issue from 1958. Little John was a light-weight free-flight rocket that was highly mobile. It could be pulled on its launcher or transported by helicopter. Length was 12 feet long and the warhead was atomic. The Dart was a very early, five foot long wire-guided anti-tank missile with a solid propellant rocket motor. An optical rangefinder was used for guidance. Both models are well detailed. The Dart includes four missiles, one launcher, three stands, decals, one optical guidance unit and a crew of three. The Little John includes a detailed launcher with elevating rails, movable support legs, decals and crew of three. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. The box is intact with four solid corners but has worse than average wear.

Selley Low Gondola - HO Scale Craftsman Kit, 1/87, K-103

Metal Model Kit,   Box Condition: Exc+

Sold   

Rare kit from Selley of Winter Park, FL. This is the same company that had an entire line of flying model aircraft in the 1930s+. The kit is in exceptional condition - the box is excellent, one end paper flap is still factory sealed and the other is neatly opened and intact. Inside, the plans are near mint and all parts are still wrapped in the factory tissue. The kit has never been started. It has been inventoried complete with all parts and includes instructions.

Revell Ford Fun Trucker Courier Pickup, 1/25, H1302

Plastic Model Kit,   Box Condition: Good

Sold   

Dated 1979. Very nice kit with detailed engine and compartment, opening hood, detailed underside, full interior, numerous custom touches, tool chest with removable cover and more. Molded in black, tinted clear and with black tires. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Monogram Trans Am Twin Turbo 6.6 Liter - Street Machine, 1/24, 2258

Plastic Model Kit,   Box Condition: Good

Sold   

Nice kit of the "TurboChief" modified Trans Am. Full engine and interior detail with opening hood, real rubber tires, removable T Tops and complete underframe details. Never started. Factory sealed bag or inventoried 100% complete with all parts, decals and instructions.

Aeroclub Rotol 4 Blade Propellers (2) - 13' Diameter Right Hand, 1/72, P004

Metal Model Kit,   Box Condition: Bagged

Sold   

Two precision cast all-metal propellers. An ideal upgrade for your kit and superior in detail to plastic props. Never used and complete.

AMT American LaFrance 1000 Series Pumper Fire Truck, 1/25, 6669

Plastic Model Kit,   Box Condition: VG+

Sold   

Large and highly detailed kit with over 300 parts. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

AMT-Frog Bleriot XI / Spirit of St. Louis / Southern Cross Fokker Ocean Pioneers, 1/72, 3901-200

Plastic Model Kit,   Box Condition: VG

Sold   

Model contains all three kits. High quality Frog kits issued in an AMT box as part of a short-lived marketing program. This kit has never been started. All three kits are still in the internally sealed factory bags with decals and instructions.

Monogram Boeing 737 United Airlines (T-43A) - (Ex-Aurora) (Modified Molds), 1/72, 5415

Plastic Model Kit,   Box Condition: Good

Sold   

Still the only 1/72 injection molded 737. 1978 issue after Monogram bought Aurora's molds. Monogram only reissued the best and most commercially viable models. The 737 fell into that category but only after Monogram carefully modified the molds for accuracy. The result is an excellent early 737-100. First, Monogram filled in the side windows. Then they added very fine and accurate full panel lines on the entire model and also added flap hinge covers (fairings) to the lower wings. Contains greatly improved, full, excellent United Airlines markings and window decals. Could be converted to Military Transport T-43A, but you must furnish your own decals. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Monogram Dornier Arrow Do-335 - Day/Night versions with Diorama Instructions And Updated Decals, 1/48, 7538

Plastic Model Kit,   Box Condition: Poor

Sold   

First issue dated 1974 in the 'tall' box. Well engineered kit with excellent detail. Includes very desirable diorama instructions. Builds one or two seater version - day or night fighter with radar. Has removable panels to show twin DB-603 engine detail. Features full cockpits with optional position canopies and two position undercarriage and rotating propellers. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. NOTE: decals are the superior ones from the 2009 reissue and are in mint condition. They cover the Luftwaffe version as well as USA and RAF evaluation markings. NOTE: instructions have some bug damage but are fully usable. The Do-335 was a very high performance German WWII aircraft that was too late to see active service. In addition to it's 480+ mph speed, the 335 was equipped with ejection seats and a linked jettisonable upper vertical tail surface.

Bandai Ford Model GT-40 (GT40) Motorized, 1/16, K101-898

Plastic Model Kit,   Box Condition: VG+

Sold   

Excellent, highly detailed older kit. This issue has two-wheel drive through all-metal gears and gear box with Mabuchi RE-14 motor. Both of these fit neatly inside the scale engine block. Features working headlights, steerable front wheels, fully detailed working front and rear suspension, full engine, the complex exhaust system, full interior, opening doors, trunk and hood, spare tire, full decals and more. Molded in gloss white, chrome plate, silver, blue tinted clear, red-tint clear and excellent rubber tires. The light bulbs, switch, contacts, gear box and wiring are all included; the Mabuchi Motor is still in the original factory box. The kit has never been started. All but one parts tree is still in the sealed bags. One tree had a torn bag, so I inventoried it and it is complete. All the metal parts are still sealed in a factory bag as well. The decals are 'excellent' as are the instructions.

AMT 1964 1/2 Ford Mustang Hardtop, 1/16, 6722

Plastic Model Kit,   Box Condition: VG

Sold   

NOTE: builder kit only! Please read carefully. Features opening and closing doors, opening hood, front seat backs that tilt forward, rotating wheels, black or whitewall tires, stock wheels or custom mag wheels, custom or stock steering wheel and decals for custom paint. The kit has not been started. NOTE: missing all engine parts, underside short cross member, optional hood hinges, license plate backs (just rectangular plastic) and one axle bracket (easily made also). Inventoried with all other parts, decals and photocopied instructions present. A nice builder if you are leaving the hood glued shut. The decals are 'good.'

Quality Craft Models PRR Pennsylvania N5C Caboose - Brass HO Craftsman Kit, 1/87, 346

Wood and Metal Model Kit,   Box Condition: Exc

Sold   

Unusual kit that is primarily brass. Builds a very detailed duplicate of the prototype 'porthole' caboose. Features two large sheets of photoetched brass which includes car sides, ends, roof, doors, cupola and more, cast white metal fittings, hardwood parts that are completely cut and milled to shape, detailed instructions and plans and very complete decals. The kit has never been started. The small fittings are still in the factory sealed bag. The parts that were not factory sealed have been inventoried complete including decals and instructions. Long after manufacturers turned to plastic ready-to-run rolling stock, Quality Craft continued to produce high quality models you could build. Headquartered in Northumberland, PA, they gave the craftsman an opportunity to build a state-of-art kit and show their skill.

Quality Craft Models B & O Baltimore & Ohio I-5 Caboose - HO Craftsman Kit, 1/87, 332

Wood and Metal Model Kit,   Box Condition: Exc++

Sold   

Excellent model that builds a detailed duplicate of the prototype. Features hardwood parts that are completely cut and milled to shape, numerous cast metal accessories, detailed instructions and plans and very complete decals. The kit has never been started. The small fittings are still in the factory sealed bag. The parts that were not factory sealed have been inventoried complete including decals and instructions. Long after manufacturers turned to plastic ready-to-run rolling stock, Quality Craft continued to produce high quality models you could build. Headquartered in Northumberland, PA, they gave the craftsman an opportunity to build a state-of-art kit and show their skill.

Quality Craft Models 40 Foot Piggy Back Trailer (Semi Trailer) - HO Craftsman Kit, 1/87, T-2

Wood and Metal Model Kit,   Box Condition: VG+

Sold   

Very nicely detailed kit with many completely precut and factory-shaped wooden parts, scribed wood, strip wood and cast metal wheels, etc. Never started and complete with all parts and instructions.

Custom Trains Limited Canadian National CN Caboose - HO Craftsman Kit, 1/87, 7501

Wood and Metal Model Kit,   Box Condition: Exc

Sold   

This is a wood caboose with the cupola near one end (not centered), two windows on each car side, dual end stair platforms and older (leaf) or newer (CN) markings. Excellent kit that builds a detailed duplicate of the prototype. Features hardwood parts that are completely cut and milled to shape, numerous cast metal accessories, detailed instructions and plans and very complete decals. The kit has never been started. The small fittings are still in the factory sealed bag. The parts that were not factory sealed have been inventoried complete including decals and instructions. This kit was made by Quality Craft for Custom Trains. Long after manufactures turned to plastic ready-to-run rolling stock, Quality Craft continued to produce high quality models you could build. Headquartered in Northumerland, PA, they gave the craftsman an opportunity to build a state-of-art kit and show their skill.

Quality Craft Models Two HOn3 East Broadtop Hoppers - HO Craftsman Kit, 1/87, 323

Wood and Metal Model Kit,   Box Condition: Exc

Sold   

Includes two complete hoppers. Excellent kit that builds a detailed duplicate of the prototype. Features hardwood parts that are completely cut and milled to shape, numerous cast metal accessories, detailed instructions and plans and very complete decals. The kit has never been started. The small fittings are still in the factory sealed bag. The parts that were not factory sealed have been inventoried complete including decals and instructions. Long after manufacturers turned to plastic ready-to-run rolling stock, Quality Craft continued to produce high quality models you could build. Headquartered in Northumberland, PA, they gave the craftsman an opportunity to build a state-of-art kit and show their skill.

Quality Craft Models 89 Foot Southern Pacific Vert-A-Pac Car - HO Craftsman Kit, 1/87, S-7

Wood and Metal Model Kit,   Box Condition: Exc+

Sold   

Excellent kit that builds a detailed duplicate of the prototype. Features hardwood parts that are completely cut and milled to shape, numerous cast metal accessories, detailed instructions and plans and very complete decals. The kit has never been started. The small fittings are still in the factory sealed bag. The parts that were not factory sealed have been inventoried complete including decals and instructions. Long after manufacturers turned to plastic ready-to-run rolling stock, Quality Craft continued to produce high quality models you could build. Headquartered in Northumberland, PA, they gave the craftsman an opportunity to build a state-of-art kit and show their skill.