Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale.

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Otaki Japanese Navy Type 93 Advanced Trainer K5Y1 'Willow' - Markings for Two Orange and One Silver Aircraft, 1/48, OT2-8-250

Plastic Model Kit,   Box Condition: Good+

Sold   

Very nicely molded kit featuring very good cockpit and engine detail, pilots, decals for three colorful aircraft and rigging wires and rigging information. The model as never been started. The parts are still in the factory sealed bag with decals and instructions. NOTE: although the decals are factory sealed and intact, they have extensive brown stains all over them. You will need to provide your own decals if you build it.

Aeroclub Spitfire Mk.XII Conversion Kit - Bagged, 1/72

Multimedia Model Kit,   Box Condition: Good+

Sold   

Very nice conversion with injection molded fuselage with fine recessed panel lines, injection molded props, spinner and several other parts, cast metal exhaust and one other metal part and instructions. Includes marking information on the two squadrons that flew the MkXII. Complete with all parts and never started. Required base kit is the Hasegawa 1/48 Spitfire Mk.9C model.

Mauve Kittyhawk III (P-40) - RAF No. 112 Sq Sicily 1943 / RAAF No. 450 Sq North Africa 1943, 1/48, 00082-1500

Plastic Model Kit,   Box Condition: Exc

Sold   

Very well molded kit with all recessed panel lines, full cockpit, detailed gear wells, drop tank, optional position canopy and decals with paint guide for the two aircraft listed. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions. NOTE: the decals are intact. however, there is a light stain on the backing paper of the decals. Please read the article (on this website) about how to save or restore old decals before using these or any older decals.

War Eagle F-100F Super Saber Conversion - Bagged, 1/48

Vacuform Model Kit,   Box Condition: Exc

Sold   

Large (1/48) scale conversion kit makes the Monogram F-100 into a two seat F-100F. Contains high quality vac parts of better quality than many injection molded kits. Also includes 4 piece metal ejection seats. Never started. Inventoried 100% complete with all parts and instructions.

Rareplane Lockheed L-1049 / EC121H / WV-2 Super Constellation, 1/72

Vacuform Model Kit,   Box Condition: VG

Sold   

This is a complete kit of the Lockheed Super Connie for Civil or EC-121H or WV-2 Configurations. If you wish, the kit can be used to perform a conversion of the still-available Heller civil L-1049 to the USAF EC-121H or the USN WV-2. The kit has never been started. Inventoried 100% complete with all parts and plans.

Welsh Boeing737-330 Lufthansa or Condor, 1/144, SL43

Vacuform Model Kit,   Box Condition: Exc++

Sold   

Very high quality injection molded / metal and vacuform kit with metal details and full decals. Features injection molded wings, engine pods and stabilizers, vac fuselage, metal struts, engine cowls, fans, nose and main gear wells, wheels and gear doors. The kit has never been started. The parts that were factory sealed are still in the sealed bags. The parts that were not factory sealed have been inventoried complete including decals and instructions.

Sierra Friedrichshafen G-III Night Bomber - Bagged, 1/72, 72-09

Vacuform Model Kit,   Box Condition: Exc++

Sold   

Still factory sealed. Kit features superbly molded main vacuform parts of better quality than many injection molded kits, cast metal details and plans/instructions.

Otaki Alfa Romeo Coupe 33 - Motorized, 1/16, OT3-22-1500

Plastic Model Kit,   Box Condition: VG+

Sold   

Rare. Large, well detailed kit. Features a super detailed engine complete down to the ignition wires with the all-metal gear box and transaxle completely hidden inside, electric motor hidden between the lower pan and floor that drives the transaxle through a shaft, opening hood, elaborate scale working suspension and steering, complete cabin with opening doors, real working headlights and tail lights, opening trunk and much more. Molded in ivory, chrome pate, black, silver, clear, red-tinted clear and with real rubber tires. All driveline items (motor, metal gear box, contacts, switch, light bulbs, etc) are included. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Nichimo IJN Nagato Battleship - Motorized, 1/500, U5007-2000

Plastic Model Kit,   Box Condition: VG

Sold   

Very nice early 1/500 scale kit. Likely from the early 1980s but likely from 1970s molds. The model was designed to be operated in water and includes metal running gear, wire, switch and required hardware. Please note that Nichimo did not furnish this issue with a motor. The kit is well detailed for that time and shows a great deal of forethought. Features dark red hull below the waterline, dark gray parts above the waterline, black searchlights and stack boot, brass leaf switch and battery contacts, electrical wiring as needed, direct single prop drive and stuffing box and ingenious on-off switch using the front 16" gun turret! The kit has not been started. All parts are still internally factory sealed. Includes instructions.

21st Century Mitsubishi A6M3 Zero Type 22 - Hiroyoshi Nishizawa 251st AG Formosa 1943 / Rabul Flying Group 1943 / 258 Kokutai Kahili Airfield Bougainville PNG 1943, 1/32, 22201

Plastic Model Kit,   Box Condition: NM

Sold   

Large scale (1/32) Type 22 Zero. Features engraved panel lines, optional position canopy with very nicely detailed cockpit, operating main landing gear, very nice pilot figure and a large, excellent decal sheet and painting guide for all aircraft listed. The kit has never been started. Internal factory sealed bags including decals and instructions.

Monogram Merite 808-300 German Tank Officer 1943 / 806-250 Rogers' Rangers 1757 / 816-250 British 8th Army Infantry 1942 / 802-250 Green Berets US Army 1966 / 803-250 German Luftwaffe Paratrooper 1941 Metal Figures, 1/32

Metal Model Kit,   Box Condition: VG+

Sold   

Includes all five superbly detailed metal figure kits from the late 1960s. Each has a black plastic display stand. All boxes are 'very good+' and no kits have been started. They are all 100% complete including the display stand and instructions.

AMT Fruehauf FB 40 Foot Refrigerator Van / Trailer Reefer - Watkins, 1/25, T507

Plastic Model Kit,   Box Condition: Good

Sold   

Original issue from the 1970s. Measures nearly 20 inches long when assembled. Features opening door, fully detailed inside floor and side panels, four 'Spyder' spoke dual wheel assembled, rubber hollow tires, authentic refrigerator Unit with expansion tank and control boxes, detailed F-2 tandem suspension, real rubber air lines, two position front supports and authentic and colorful Watkins decals that are still in 'near mint' condition. The kit has never been started. NOTE: missing two tiny red marker lights. Otherwise inventoried with all other parts present including decals and instructions. NOTE: there are the typical tire burn marks on the top and one outer side.

Hasegawa Fieseler FI 156C-1 Storch - Rommel or Mussolini Rescue Plane, 1/32, 1141

Plastic Model Kit,   Box Condition: Sealed Good+

Sold   

SALE!! Big scale Storch that is still factory sealed but the seal has drawn the box top concave as shown and has split. Very highly detailed kit features figures, complete interior, highly detailed engine and firewall, removable cowling, optional position doors and wire landing gear. Includes decals for either famous aircraft and the splinter camo SB+UG.

Monogram Peterbilt 359 Conventional Semi Tractor Truck, 1/16, 2500

Plastic Model Kit,   Box Condition: Good+

Sold   

Rare. Very large (1/16) truck from 1980. Very well detailed. This model builds up a rolling chassis just like the actual truck with complete engine, suspension, exhaust and drive line detail. Features detailed engine compartment, opening hood, 63 inch walk-in sleeper, complete interior with CB radio, Alcoa Alloy wheels, dual exhaust stacks, twin antennas, rotating 5th wheel, air horns and side mirrors, pinstripe decals, license plates and more. Molded in yellow, black, chrome, clear and with rubber tires. The kit has not been started. NOTE: Missing one #113 small cylinder which can be made from scratch. Otherwise inventoried with all other parts, decals and instructions present. NOTE: there are small to medium tire burn marks on the exhaust stacks, roof light pods, bottom part of the grill and fan shroud. None of the marks are severe.

MPC AV-8A Harrier - US Marines, 1/24, 1-4606

Plastic Model Kit,   Box Condition: Sealed Exc

Sold   

Still factory sealed but the seal has splits. Very large model from Airfix molds. Highly detailed including full engine and cockpit, opening canopy, rotating thrust nozzles, real rubber tires and much, much more.

MPC Junkers Ju-87B Stuka Dive Bomber, 1/24, 1-4604

Plastic Model Kit,   Box Condition: Sealed VG+

Sold   

Still factory sealed but the seal has drawn the box top concave as shown. Very large 1/24 scale kit from Airfix molds. Features removable cowling showing detailed Jumo engine and firewall, real rubber tires, working canopy and complete cockpit, movable control surfaces, choice of bomb loads and more.

AMT 1937 Cord 812 SC Supercharged Convertible Coupe, 1/12, 2424

Plastic Model Kit,   Box Condition: VG

Sold   

Early issue of this very large 1/12 scale detailed classic car model. Features super detailed engine, opening hood, full interior with removable top, opening doors, windows that crank up and down with the handles, full suspension and underbody details, vacuformed display base and rubber tires. Molded in clear, red tinted clear, chrome and yellow, black and tan plastic. Never started. All parts (but the clear, base and car body) are still in factory sealed bags (these were never factory bagged. Detailed instructions included. NOTE: missing one of the two red, round tail light lenses. There are tire burn marks on one flat side door glass. The burn are of only moderate depth and the clear is thick, so they may wet-sand and buff out (please see the article on this website on how to save and improve clear plastic parts).

Monogram USS Constitution with Sails - 30 Inches Long (ex-Imai Old Ironsides), 1/120, 3705

Plastic Model Kit,   Box Condition: Good++

Sold   

From 1981 and from excellent Imai molds. Model is 21 inches high and 30 inches long when assembled. Features one piece hull, detailed decks, fittings and cannon, preformed rat lines, rigging material, detailed rigging diagrams, beautifully done vacuform billowing sails and more. The kit has never been started. The parts that were factory sealed are still in the sealed bags. The parts that were not factory sealed (white plastic) have been inventoried complete including decals and instructions. Please NOTE that one small top crosstree is broken but all parts are present. Also the davits on the back hull are very neatly broken off at the base but also present and an easy repair.

Ambroid Winged Snow Plow Car - HO Craftsman Kit, 1/87, K-10

Wood and Metal Model Kit,   Box Condition: VG+

Sold   

From 1966. High quality Ambroid kit from the 'Golden Age' of HO models. The limited-issue Ambroid kits are widely considered to be among the finest Craftsman kits issued. They can be built to a museum-quality display or used on your layout. The kit is made from quality Northeastern Scale Lumber and features all pre-scribed and milled hardwood parts, milled detail parts as needed, wood and metal stock, an envelope of detail parts and full instructions and plans. The kit has never been started. It has been inventoried complete with all parts and includes instructions. If you have an interest in these highly accurate HO kits and the revolution they created in modeling, please read the article about their history located on this website.

Ambroid Southern 'All-Door Loading / Super Cushion Service' Pullman-Standard 56 Foot Full-Door Box Car - HO Craftsman Kit, 1/87, 2

Wood and Metal Model Kit,   Box Condition: VG+

Sold   

Dated 1963. High quality Ambroid kit from the 'Golden Age' of HO models. The limited-issue Ambroid kits are widely considered to be among the finest Craftsman kits issued. They can be built to a museum-quality display or used on your layout. The kit is made from quality Northeastern Scale Lumber and features all pre-scribed and milled hardwood parts, milled detail parts as needed, wood and metal stock, a sealed bag of detail parts and full instructions and plans. The kit has never been started. Internal factory sealed small parts bag and the other parts have been inventoried 100% complete including instructions. If you have an interest in these highly accurate HO kits and the revolution they created in modeling, please read the article about their history located on this website.