Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale.

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

KVZ Tupolev Tu-154 Aeroflot, 1/100

Plastic Model Kit,   Box Condition: Sealed Exc+

$125   

Still factory sealed. Soviet Tri-Jet design in Cold War Aeroflot markings. Large 1/100 scale model has raised and recessed panel lines and is molded in clear, white, black and silver. Features large colorful decal sheet and good overall surface detail. KVZ was the name used by this East German kit manufacturer from 1969 to 1973. During this time, some fantastic Cold War kits were produced of Russian Airliners and Military Helicopters and Aircraft.

Hawk Douglas A-24 (SBD Dauntless) - Picture Gallery Issue, 612-50

Plastic Model Kit,   Box Condition: VG++

$26   

Early hardbox kit with attractive Picture Gallery artwork. Nicely molded kit with excellent fit and recessed panel lines. Molded in silver with green-tinted clear canopy, stand and stand arm. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. NOTE: one part, the engine is light gray. It is from the same kit but a later issue.

Athearn 40' AAR Steel Box Car Great Northern - HO Craftsman Kit with Sprung Metal Trucks, 1/87

Metal Model Kit,   Box Condition: Good

$42   

Very high quality wood and metal kit from the Golden Age of HO Craftsman kits. Builds a very accurate and highly detailed prototype. Of the early metal box car kits, these are my favorites. Their popularity is witnessed by the various reissues through the years. Almost all the parts that are metal on the actual box car are metal on the model. This and the factory paint, lettering and decoration makes these kits difficult to beat for scale appearance. Features stamped steel body that is factory painted, decorated and lettered, steel car ends, doors and roof, steel ladders, door guides and brake platform, cast metal roof walk, bolsters, coupler pockets and three piece brake detail, stamped metal undercarriage beam with fine cross bearers, corner steps, grab irons and more. Includes real sprung trucks. The factory paint is 'excellent' with only light storage wear and I have packed them in the original factory wax paper sleeve and put them inside the instructions so it will not be damaged in shipment. The kit has never been started. The small parts are still in factory sealed envelopes and all other parts have been inventoried complete including instructions. If you have an interest in these kits and the revolution they created in modeling, please read the article about their history located on this website. Please cut and paste this link in your browser to see it - http://www.oldmodelkits.com/blog/plastic-model-kit-history/the-ho-scale-model-railroading-revolution-of-the-1940s/

Maintrack Fairey FD.1 Delta 1 - (FD-1) - Bagged, 1/72, PX005

Vacuform Model Kit,   Box Condition: Good

$28   

Originally designed as a VTO (Vertical Take-Off) testbed, the prototype was to use an inclined ramp. The Delta 1 was to investigate characteristics and control of the delta wing at transonic speeds, but the program was halted by unfavorable flight characteristics. Very high quality vac kit with better mold quality than many injection molded kits. Includes metal details and decals. The kit has never been started. The parts that were factory sealed are still in the sealed bags. The parts that were not factory sealed have been inventoried complete including decals and instructions.

Hasegawa Airbus A320 - ANA All Nippon Airways (A-320), 1/200, LL27

Plastic Model Kit,   Box Condition: Sealed Exc+

$22   

Still factory sealed. Excellent quality kit features extensive decals, optional position landing gear and display stand.

Sasquatch Dougals MD-87 - With AHS Window and Windshield Decals, 1/200, SQ-32

Resin Model Kit,   Box Condition: Exc

$22   

Complete kit including undercarriage. Features resin fuselage with injection molded wings, engines, elevators, landing gear and all other parts. Includes the superb AHS windows decal set. The kit has never been started. It has been inventoried complete with all parts and includes instructions.

Airfix Saunders-Roe SR-53 - (S.R.53) Bagged Type 3 Logo, 1/72, 100

Plastic Model Kit,   Box Condition: Sealed Good

$75   

Still factory sealed. 1960s issue. Hard-to-find.

Revell MAC C-135B Transport - (Boeing 707), 1/144, H254-130

Plastic Model Kit,   Box Condition: Good+

$44   

Sale Pending
Email for availability.

1967 issue of the 'Jet Commando' series. Features two position landing gear and cargo door, movable wheels, MAC decals, and optional position crew escape hatch. Molded in silver. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Pegasus Miles Master Mk1 - Bagged, 1/72, 2003

Plastic Model Kit,   Box Condition: Sealed

$26   

Still factory sealed. Limited issue kit. Bagged kit does not include header. Very nicely molded with very fine recessed detail. Includes cast metal details and full decals.

Welsh Handley Page HPR7 Herald 200 Series Channel Express - Bagged, 1/144

Vacuform Model Kit,   Box Condition: Sealed

$22   

Still factory sealed. Excellent vacuform kit. The moldings are of better quality than many injection molded kits. Includes cast metal details, resin nacelles and extensive decals. Includes instructions/drawings.

Ventura Supermarine Spitfire Mk.18, 1/72, VN0201

Plastic Model Kit,   Box Condition: Sealed VG+

$28   

Still factory tape sealed. Limited run injection molded kit. Features injection molded main parts, cast metal details, vac canopy and full decals.

Tamiya HMS Prince of Wales Battleship, 1/700, 122

Plastic Model Kit,   Box Condition: VG++

$20   

Sale Pending
Email for availability.

1/700 scale waterline kit. Very finely molded and detailed. The kit has never been started. It has been inventoried complete with all parts and includes instructions. There are no decals; sometimes these kits did not come with decals and I am not sure if this one did or not. The Prince of Wales saw very active service in WWII from fighting the Bismarck with HMS Hood to Far East service with the HMS Repulse off the Malay peninsula. It was in this battle that both ships were sunk by Japanese airborne torpedo attack.

Tamiya JDS Ohsumi LST4001, 1/700, 31003-2400

Plastic Model Kit,   Box Condition: Exc

$26   

1/700 scale waterline kit. Very highly detailed and finely molded. Includes detailed bay for landing ships, opening bay door, LCAC (stowed or deployed) landing ships, CH-47J Chinook helicopters and extensive decals. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Hasegawa Boeing 737-400 JTA - Japan TransOcean Air, 1/200, LL17

Plastic Model Kit,   Box Condition: Sealed Exc+

$22   

Still factory sealed. High quality Hasegawa molds from 1996. Features extensive decals, optional position landing gear and display stand.

Fujimi Westland Seaking Mk.41 - German Navy SAR, 1/72, 7A29

Plastic Model Kit,   Box Condition: Sealed Exc

$28   

Still factory sealed. Very nicely molded and well detailed. Features very fine raised panel detail, highly detailed cockpit and cabin, optional position cabin doors, rotating main and tail rotors and search and rescue equipment.

Ragwings Pfalz E-I - Bagged, 1/72, 081

Resin Model Kit,   Box Condition: Sealed

$36   

Still factory sealed. Very limited production kit - one of about 100 ever made. Very high quality resin castings with metal details and full decals for two aircraft. I have received the following information from Jeff Stockham on this rare kit: 'Regarding the Ragwings Fokker D.VI you have for sale, I can provide some additional background info on this kit. The company was formed and owned by Marty Snow (dba MGS Enterprises) of Rochester, NY; Marty did the masters for the Pfalz E-1 and Bristol Scout D; I did the master for the Fokker D.VI (modifying some parts from Revell's Dr.I and D.VII and scratchbuilding some) and I did the artwork for all the backing cards, decals and instructions, as well as the small print ads that appeared in FineScale Modeler and other magazines. I was halfway though the master for a really accurate Albatros D.V/D.VA when other events interfered, other makers came out with the same items, momentum slowed, and Marty eventually closed up the business. The actual production of both the resin and metal copies was subcontracted to Ted Paris of Commanders Series Inc, Rochester NY; I think that Decal Master printed the decals. In all the years since, I have never seen one of these for sale. I know Marty marketed them directly to retail buyers via mail order ads in FSM; I don't know how many he actually sold, but it wasn't enough to make it worth the effort. These have to be among of the rarest short-run resin kits ever. I never did build one of these D.VI's up, but I do remember that it got a very positive review in one of the British modeling magazines (I think it was Windsock.)'

Lindberg Jurassic Park Velociraptor 'Raptor', 70272

Plastic Model Kit,   Box Condition: Sealed Exc+

$29   

Still factory sealed. 1993 issue released with the popular movie. The scale is not listed but the kit is over 15 inches long and over 6 inches high. There were four very nice dinosaur models issued in this series.

Lindberg Jurassic Park Tyrannosaurus Rex, 70271

Plastic Model Kit,   Box Condition: Sealed Exc

$32   

Still factory sealed. 1993 issue released with the popular movie. The scale is not listed but the kit is over 20 inches long and over 69 inches high. There were four very nice dinosaur models issued in this series.

SK Model Westland Whirlwind - 263 RAF 1940 / 137 RAF 1941, 1/72, TB1001

Plastic Model Kit,   Box Condition: Exc

$24   

Nice kit with very fine raised panel lines and recessed control surface outlines. Features 'good' cockpit detail, pilot figure, detailed landing gear, rotating wheels and props and decals and paint guide for the two aircraft listed. Molded in light gray and clear. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Tri-ang Daytona Mini-Highway Racing Car Series

Metal Model Kit,   Box Condition: VG

$22   

Not a model kit but a factory assembled and painted toy car. Features a pressed steel body on a die-cast chassis. In 'very good' condition with all parts, all decals and very little paint wear.