Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale.

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Monogram Boeing B-17G Flying Fortress with Diorama Instructions, 1/48, 5600

Plastic Model Kit,   Box Condition: Good+

$39   

Original issue dated 1975. Includes desirable diorama instructions. Very highly detailed model with full interior. Widely considered the finest 1/48 B-17 model ever produced. Never started. Inventoried 100% complete with all parts, decals and instructions.

Revell 1900 Packard Highway Pioneers, 1/32, H33

Plastic Model Kit,   Box Condition: Good+

$29   

NOTE: builder kit only, please see below. Ex-Gowland and Gowland molds in the Highway Pioneers series from about 1954/55. Never started. Inventoried with all parts and instructions. NOTE: The box is old, but the kit inside is a recent reissue of the Highway Pioneers Packard by Dapol/Minicraft of the United Kingdom. Dapol did use the original molds and there is some flash.

Arii F/A-18 Hornet - US Marines VMFA-314, 1/144, 23007-300

Plastic Model Kit,   Box Condition: Good+

$7   

Nicely molded kit with all recessed panel lines and US Marine decals. Never started. Factory sealed bag with decals and instructions.

Formaplane Rogozarski IK-3 - WWII Yugoslavian Fighter - Bagged, 1/72, C38

Vacuform Model Kit,   Box Condition: Good+

$22   

Very high quality vacuform kit from about 1987. Features recessed panel line detail and raised detail were appropriate, full cockpit, optional position landing gear, prop, clear canopy and more. Never started and complete with all parts and plans. Vacuform kits are not recommended for modelers who do not have experience building them.

MPC Hannover CL-111a (CL111 / CL.111) - Airfix Molds, 1/72, 5002-50

Plastic Model Kit,   Box Condition: Exc

$18   

Kit has not been started. Complete with all parts and instructions. Decals are present but are not usable due to flaking.

Maintrack Fairey FD.1 Delta 1 - (FD-1) - Bagged, 1/72, PX005

Vacuform Model Kit,   Box Condition: Exc

$38   

Originally designed as a VTO (Vertical Take-Off) testbed, the prototype was to use an inclined ramp. The Delta 1 was to investigate characteristics and control of the delta wing at transonic speeds, but the program was halted by unfavorable flight characteristics. Very high quality vac kit with better mold quality than many injection molded kits. Includes metal details and decals. The kit has never been started. The parts that were factory sealed are still in the sealed bags. The parts that were not factory sealed have been inventoried complete including decals and instructions.

Heller Dewoitine 520 (D-520) - Buzco Issue, 1/72, 902-89

Plastic Model Kit,   Box Condition: VG++

$22   

Heller USA (Buzco) one-piece box issue. Never started. Factory sealed bag or inventoried 100% complete with all parts, decals and instructions.

RCM McDonnell XP-67 Moonbat, 1/48

Vacuform Model Kit,   Box Condition: Bagged

$90   

SPECIAL ORDER vacuform kit. Not shipped from stock. Kit is molded upon receipt of payment. Time from receipt to shipping your kit is usually 8 to 10 weeks. Kit includes resin and/or metal details -clear canopy and full size plans/instructions. Details included will vary from kit to kit but may contain landing struts - wheels - props - engines (not jets) - some cockpit parts - seats - etc. Other parts will need to be scratch built or from your spares box. Decals not furnished. Vacuform kits are only recommended for modelers who are experienced with this type of model. Special skills and scratch building experience are required. If you are curious, I highly recommend that you read the article 'How To Build Vacuform Model Kits' which is located on this website.

MPC Consolidated B-24J Liberator - 2109835 of 392nd Bomber Group April 1944, 1/72, 1502-150

Plastic Model Kit,   Box Condition: VG+

$39   

1970s issue from Airfix molds. Well detailed. Features decals for the 392nd ship that was lost in action over Germany on April 11, 1944. Features elevating guns and rotating turrets, movable control surfaces, retracting landing gear, rotating props and optional position crew entry door and ladder. The kit has never been started. Inventoried 100% complete including decals and instructions.

Revell Spad XIII - Great Britain Issue, 1/72, H627

Plastic Model Kit,   Box Condition: Exc

$22   

1963 Revell Great Britain 'small box' issue with framable box artwork. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Klingon Armorer Avenger Class Heavy Frigate - Star Trek Federation

Vacuform Model Kit,   Box Condition: VG+++

$60   

Limited production kit consisting of 30 highly detailed parts molded in .040 inch styrene. All panel lines are recessed. When assembled the kit measures about 18 inches long when assembled. Includes full instructions. Never started. Complete with all parts on uncut sheets.

Easy Built Models Monocoupe - 12 inch Wingspan Balsa Flying Model

Wood Model Kit,   Box Condition: Exc++

$16   

High quality modern kit made in the finest tradition of the stick and tissue kits from the 1930s-1950s. Kit contains high quality printed balsa, strip wood, plastic propellers (when required), rubber, full sized plans and other accessories. The model has not been started. The parts are either in factory sealed bag(s) or inventoried 100% complete with all parts and instructions.

Aviation USK T-6 Netherlands (Dutch) - Conversion Kit, 1/72

Multimedia Model Kit,   Box Condition: VG

$12   

Conversion kit makes a T-6 into a Dutch T-6. Includes two vac canopies and two blister windows and one resin exhaust pipe. Base kit is required. Complete and never started.

A A Hales Ltd Cutty Sark 'Marinecraft' Kit - 17 Inch Wooden Ship Kit, 658

Multimedia Model Kit,   Box Condition: VG

$89   

Very nicely early kit from Hales who also had the Yeoman line of flying aircraft kits. This model features a shaped wooden hull, early injection molded life boats, dead-eyes, figurehead and ships wheel, a full set of flags and sails, injection mast platforms, metal chain, numerous brass rigging parts, precut wood, wood stock for masts, yards, metal stock, three types of rigging material, colorful insignia sheet with front scrollwork, rear scrollwork and name, name plate and cabin sides with windows and doors, detailed instruction sheet, large, foldout photographic sheet showing construction at many phases (and keyed to the instructions) and full size plans with rigging details. The kit has never been started. The small parts are still in the internal factory sealed bags and the parts that were never sealed have been inventoried complete including flags, instructions, photo sheet and plans.

Pegasus Supermarine Spiteful F.14 - Bagged, 1/72, 9

Plastic Model Kit,   Box Condition: VG

$26   

Limited run plastic model kit. Molded in white and clear with fine recessed panel lines. The kit has never been started. Inventoried 100% complete including instructions.

Bandai Panzer H 18/2 Auf Gw II (105mm) WESPE Sd.Kfz.124, 1/48, 058221

Plastic Model Kit,   Box Condition: Sealed NM

$39   

Still factory sealed. Rare 1/48 scale kit from the classic and highly detailed Bandai Pin Point armor series. These kits are beautifully molded and feature full interior detail as well as flexible treads, many operating features and very detailed crew members that can be posed in almost any position.

Revell Beatnick Bandit II Ed 'Big Daddy' Roth, 1/25, 85-7618

Plastic Model Kit,   Box Condition: VG

$38   

From 1996. Very nicely detailed kit of Roth's later design. Features detailed engine, complete rolling chassis build just like the actual car, separately molded suspension, exhaust, fuel tank, steering linkage, hoses and more, full interior, clear bubble top, Roth decals (including Rat Fink) and scale Roth and rat fink figures. Molded in chrome, white, yellow-green tinted clear and with rubber tires. The kit has never been started. Internal factory sealed bag, and the parts that were never factory sealed have been inventoried 100% complete including decals and instructions.

MPM Bell P-63A Kingcobra - USA or USSR, 1/72, 72021

Plastic Model Kit,   Box Condition: Exc+

$32   

Limited issue kit with decals for both variants. With brass photoetched parts and film instruments. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Multiple Toymakers Wright Brothers 1903 Wright Flyer, 1/30

Multimedia Model Kit,   Box Condition: Exc++

$36   

Rare kit from 1973. Multiple Toymakers was a division of Miner Industries Inc out of New York, New York. The kit is an interesting mix of wooden and injection molded parts that have been pre-covered in a linen covering. Large scale, roughly 1/30. The model has not been started. The parts are either in factory sealed bag(s) or inventoried 100% complete with all parts and instructions.

Cleveland Mile Fliers The C-S Interceptor - Fuselage Style Balsa Flying Model Airplane Kit, C-3

Wood Model Kit,   Box Condition: Exc

$65   

Early World War II kit. The model has not been started. Inventoried 100% complete with all parts and instructions. The Cleveland Model and Supply Company played a pivotal role in the development of true scale models. In 1909 Bleriot's English Channel flight caused a surge in aviation and model aircraft around the globe. Several companies were ideally positioned to take advantage of the aviation craze. In the USA, Wading River Manufacturing Co. (1909), White Aeroplane (1911), Ideal Model Aeroplane (1911), Broadfield Model Aeroplanes (1919) were among these pioneers, offering everything from plans and parts to complete kits and ARF models. Lindbergh's 1927 crossing of the Atlantic Ocean caused an even bigger world-wide phenomenon called 'The Aviation Craze' that extended up to the start of World War II. Many companies such as Megow, Guillow's and others started right around the time of Lindbergh's flight. Some of these models flew and flew well, but they all had one thing in common - were generally not accurate scale representations. In 1929, a youngster named Ed Packard had a very advanced dream to produce incredibly accurate, true scale models that flew perfectly. This radical idea established the world's longest operating single-owner model airplane supply business, called Cleveland Model and Supply Company. To this day, Cleveland models are treasured as the most accurate flying scale models produced. The fact that Mr. Packard started and successfully grew this business during The Great Depression is a testament to his ideals and business skill. I highly suggest the excellent book called 'Aviations great Recruiter, Cleveland's Ed Packard' by H.L. (Herm) Schreiner. It is an excellent history of the man, his company and the times of the Golden Age of Model Aviation.