Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale.

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Airframe Siemens-Schuckert D.IV (D-IV) or D.III (D-III) - Bagged, 1/72

Vacuform Model Kit

$10   

Still factory sealed. Basic vac kit with some molded in detail. Comes with alternate parts so you can build the D-IV or the D-III. Certain modeling skills are required to build vacuform kits. Not recommended for beginners. The D-III was renowned for it's incredible rate of climb, but was plagued by engine trouble. The D-IV was designed to have a higher speed in level flight, and in some respects was a better fighter than the famous Fokker D-VII.

Tamiya Dragon Wagon 40 Ton US Tank Transporter, 1/35, MM230

Plastic Model Kit,   Box Condition: Sealed NM

$110   

Still factory sealed. Very highly detailed armor kit.

Rarebits P-51H or F-51H Conversion - Bagged, 1/72

Vacuform Model Kit,   Box Condition: Sealed NM

$8   

Features very high quality moldings, better than many injection molded kits. Includes new fuselage, wheels, prop, spinner and canopy for conversion of a P-51D injection molded kit to a P-51H or F-51H. Never started and complete. Please note this requires a base kit (not included). The Airfix P-51D is recommended but you could use the Monogram kit as well.

Revell Neptune P2V-7 with Skis 'Operation Deep Freeze' - (P2V7), 1/104, H170-1995

Plastic Model Kit,   Box Condition: Sealed VG+

$145   

Still factory sealed but the seal has drawn the box concave. Lodela issue of this rare Neptune variant. This is the classic 'S' kit with ski landing gear and decals for Arctic service.

Revell RAF Mustang III (P-51) - With Malcom Hood, 1/32, H152

Plastic Model Kit,   Box Condition: VG

$54   

1971 release. Features fully detailed cockpit, landing gear, pilot figure and removable cowling to show Rolls Royce Merlin engine. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Comet Douglas SBD-3 Dauntless - 20 inch Wingspan Flying Balsa Airplane Model, 3401-150

Wood Model Kit,   Box Condition: Good++

$32   

1970s reissue of the older kit. Kit features traditional wood/tissue construction, quality printwood, stripwood, wire shaft, fully formed and finished wood wheels and thrust button, clear canopy material, rubber, tissue, propeller and detailed full size plans with building instructions. The model has not been started. Inventoried 100% complete. Comet was a famous manufacturer of stick and tissue flying and static models. In the 1930s Great Depression, they lead the low-priced kit revolution with the "Dime Scale" kits and famous advertisements in Model Airplane News magazine and others. Comet reached it's peak in the 1930s when they acquired the services of Carl Goldberg. Goldberg was a highly accomplished modeler with articles in Model Airplane News and famous designs that won him several National level competitions in the 1930s and beyond. (Carl Goldberg went on to found his own company and produced well designed and popular free-flight and RC aircraft). Comet survived the post World War economic slump and continued kit production until they were bought out by long-time competitor Guillow's in 1998.

Aviation USK Polikarpov I-15 Chato - USSR or Spanish Civil War - Bagged, 1/72, AV1006

Plastic Model Kit,   Box Condition: Good++

$16   

Nice, limited edition injection molded kit. Has decals for at least 6 different aircraft. Well detailed. Never started. Factory sealed bag or inventoried with all parts decals and instructions present.

Pocher Alfa Romeo Spider Touring Gran Sport 1932, 1/8, K73

Multimedia Model Kit,   Box Condition: Sealed Exc

$975   

This kit is still factory sealed in the clear cello wrap but the seal has splits. Pocher made the finest automobile models ever created. The detail and working parts on these long out-of-production, big 1/8 scale kits is amazing. This kit has 1954 parts of plastic, brass, steel, leather, iron, rubber, copper and many other material. Working features include operating steering, working suspension, lights that operate from the dashboard, doors that open and close with operating door latches and handles, starting handle that operates the crankshaft, connecting rods, pistons, V-belts, Fan, dynamo, etc in the engine. The convertible top operates - and much, much, more more. Recommended for experienced modelers only. NOTE: This is the desirable early version with the most realistic wheel construction. Each wheel is built just like a real spoke wheel with individual spokes and well over 100 parts. Shipping insurance (and Express Mail for international customers) is required.

Renwal Curtiss Goshawk F11C-2 Aeroskin - (F112C) USS Saratoga, 1/48, 282-149

Plastic Model Kit,   Box Condition: Sealed VG++

$85   

Still factory sealed but the seal has drawn the box concave. This is one of Renewal's famous Aeroskin kits, and a rare large one in 1/48. Features markings for the aircraft of "High Hat Squadron", VF-1B commander Seligman aboard the USS Saratoga in the early 1930s. The model has an injection molded inner structure of ribs and stringers like a real aircraft, then the modeler covers it with provided authentic pre-colored Aeroskin fabric. There is little painting needed as elaborate finishes are printed directly on the Aeroskin covering. This results a very realistic and colorful model.

Aurora Mace TM-76 Guided Missile, 1/48, 130-79

Plastic Model Kit,   Box Condition: VG++

$315   

1958 'Famous Fighters' first and only release. Large 1/48 scale kit of the early guided missile. Includes booster rocket and clear display stand. Inventoried 100% complete with all parts, decals and instructions.

Guillows Piper Cherokee 140 - 20 Inch Wingspan Flying Model, 1/12, 307

Wood Model Kit,   Box Condition: Sealed VG+

$22   

Still factory sealed. High quality stick-and-tissue flying model that can be flown rubber power, .020 gas power or electric power. Features light plastic nose cowl, acetate for windows, plastic prop, 'razor sharp' die cut balsa parts, rubber motor, firewall for gas engine, covering tissue, wheels, plastic wheel pants and pilot figure, landing gear wire, decal sheet and step by step instructions/plans.

StromBecker Lockheed F-94 Jet, C-43

Wood Model Kit,   Box Condition: Good-

$79   

Excellent 1950s kit. The carving is done to the final shape. When complete it makes an impressive desk top display. Features all high-quality hardwood main parts, clear plastic canopy, full color decals, glue, wood filler, sandpaper and special display stand. Never started. Inventoried complete with all parts and plans. Box displays better than the 'good-' grade but is graded such because there are many pieces of clear tape on the short box ends. Before plastic kits were introduced, Strombecker was famous as the premier hardwood preshaped model manufacture. In the 1940s and 1950s, Strombecker kits were flawlessly engineered but not inexpensive. All wooden parts are hardwood and are precarved to shape - you only had to glue, sand and paint to finish them.

Comet Stinson 150 Voyager Struct-O-Speed - 10 inch Wingspan Flying Airplane, 2103-29

Wood Model Kit,   Box Condition: VG

$26   

Purchased new in 1972 from National Hobby in Ohio. Comet would advertise that the Struct-O-Speed series 'Puts Itself Together...That Quick!' on the box top, and it was not a completely idle boast. These kits were very highly prefabricated for their time, and in comparison to the regular stick and tissue models, the claim is not unfounded. Kit features all die cut wood parts and wheels, balsa prop, metal prop shaft and rubber hood and detailed instructions with flying tips. Complete and never started. Comet was a famous manufacturer of stick and tissue flying and static models. In the 1930s Great Depression, they lead the low-priced kit revolution with the "Dime Scale" kits and famous advertisements in Model Airplane News magazine and others. Comet reached it's peak in the 1930s when they acquired the services of Carl Goldberg. Goldberg was a highly accomplished modeler with articles in Model Airplane News and famous designs that won him several National level competitions in the 1930s and beyond. (Carl Goldberg went on to found his own company and produced well designed and popular free-flight and RC aircraft). Comet survived the post World War economic slump and continued kit production until they were bought out by long-time competitor Guillow's in 1998.

Comet Aeronca K - 25 inch Wingspan - Coke Bottle Issue, N25-29

Wood Model Kit,   Box Condition: Exc++

$44   

1950s/early 1960s stick-and-tissue flying model. Features quality balsa printwood, strip stock, formed wheels, covering material and full plans. The kit has never been started and is complete. The entire Comet 1950s "N" line included the following (gaps mean there is no kit, at least at that time): N1 Tiger Shark P-40, N2 F-86D Sabre Jet, N4 Globe Swift, N6 Taylorcraft, N8 F-51 Mustang, N9 Helicopter, N11 Ryan Navion, N12 Firefly, N15 Piper Cub, N16 Fokker DVII, N17 Spad, N24 Phantom Fury, N25 Aeronca K (floats) and N26 Stinson SR-7. Comet was a famous manufacturer of stick and tissue flying and static models. In the 1930s Great Depression, they lead the low-priced kit revolution with the "Dime Scale" kits and famous advertisements in Model Airplane News magazine and others. Comet reached it's peak in the 1930s when they acquired the services of Carl Goldberg. Goldberg was a highly accomplished modeler with articles in Model Airplane News and famous designs that won him several National level competitions in the 1930s and beyond. (Carl Goldberg went on to found his own company and produced well designed and popular free-flight and RC aircraft). Comet survived the post World War economic slump and continued kit production until they were bought out by long-time competitor Guillow's in 1998.

Branchline Trains Blueprint Series HO Heavyweight Passenger Car 8-1-2 Pullman Sleeper Chesapeake & Ohio (C&O) 'Mount Vernon' 1940s/1950s, 1/87, 5031

Plastic Model Kit,   Box Condition: Good

$40   

Superb and highly detailed model kit that is factory painted and lettered in the C&O 'George Washington Scheme' with delux lettering and Pullman mechanical air conditioning. Features separate grab irons, extensive and complete underbody details, steam, air & signal lines, working diaphragms, full interior, metal wheels, magnetic knuckle couplers and much more. The kit has never been started. The parts have never been removed from the box and are still wrapped in the factory protective tissue paper. Includes excellent, illustrated instructions.

RCM Westland Whirlwind, 1/32

Vacuform Model Kit,   Box Condition: Bagged

$100   

SPECIAL ORDER vacuform kit. Not shipped from stock. Kit is molded upon receipt of payment. Time from receipt to shipping your kit is usually 8 to 10 weeks. Kit includes resin and/or metal details -clear canopy and full size plans/instructions. Details included will vary from kit to kit but may contain landing struts - wheels - props - engines (not jets) - some cockpit parts - seats - etc. Other parts will need to be scratch built or from your spares box. Decals not furnished. Vacuform kits are only recommended for modelers who are experienced with this type of model. Special skills and scratch building experience are required. If you are curious, I highly recommend that you read the article 'How To Build Vacuform Model Kits' which is located on this website.

MPM DB-8A (Dutch Export A-17) - Dutch Airforce, 1/72, 72525

Plastic Model Kit,   Box Condition: VG++

$38   

High quality limited production kit. Features recessed panel lines and full decals. Decals for two aircraft; 3 fighter of 2 wing, which was shot down by a BF-110 on 10 May, 1940 and the aircraft from Soesterberg base with triangle markings that was captured by German paratroopers on 10 May 1939. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Revell Douglas Thor / Thor-Able Missile - with Truck and Trailer - 'S' Issue, 1/110, H1823-129

Plastic Model Kit,   Box Condition: Exc

$500   

Rare. This 1958 "S" hardbox release is the only single issue of this kit. Features elevating missile trailer, four figures, movable fuel boom, fuel truck and trailer, launch pad/blast shield/missile supports, launcher base and more. Includes optional parts are decals for making the Thor-Able version. Molded in correct white and dark blue. Never started. Inventoried 100% complete with all parts, decals and instructions. Decals and instructions are 'exc'. Box would grade slightly higher but it has one neatly split corner.

Aurora Northrop P-61 Black Widow, 1/48, 392-198

Plastic Model Kit,   Box Condition: Sealed Mint

$179   

Still mint in the factory seal. Hardbox issue dated 1960 - however, this issue lacks the 'Famous Fighters' in the oval logo boarder and has a 198 price extension, so it likely from 1961. Large 1/48 scale kit. This has to be some of Jo Kotula most fantastic artwork - the P-61 patrols over a South Pacific island base at night, destroying an intruder (or defender?).

Renwal Nieuport 17 Aeroskin - Lt. C.E. Nungesser's Aircraft, 1/72, 264-79

Plastic Model Kit,   Box Condition: Sealed NM

$48   

Still factory sealed. Contains pre-colored Aeroskin fabric created to resemble fabric covered aircraft. No painting needed since all designs are printed on the fabric. You build the inner structure of the aircraft then cover it, similar to the construction of the actual aircraft. Has markings for Nungesser's colorful aircraft.