Plastic Model Kit, Box Condition: Exc++
From the very early 1960s. Fujimi Japan issue with very collectible box artwork and glossy box top. Features rotating prop, working ailerons and pilot figure. The model as never been started. The parts are either still in the factory sealed bag or have been inventoried 100% complete with all parts, decals and instructions.
Plastic Model Kit, Box Condition: Sealed Exc
Still factory sealed but the seal has split. Rare 1989 Revell of Germany issue. Includes a large and colorful decal sheet for both aircraft. This kit is from the famous Monogram 'Four Star' kit molds and features retracting landing gear, rotating wheels/props, boarding ladder, three man crew, optional position door and two survivors in life rafts.
Multimedia Model Kit, Box Condition: VG+
From 1950. High quality craftsman model railroad kit. Features all metal truss frame sides, completely precut wooden roof, floor and ends, metal three-board roof walk, metal hardware such as roof ribs, underside details, etc, all metal fully sprung trucks and injection molded slat sides that are factory painted and numbered/lettered. The kit has never been started. Internal factory sealed bag or inventoried 100% complete including instructions. Please read the article on this website about these excellent kits from the Golden Age of Model Railroad models.
Plastic Model Kit, Box Condition: Good-
Very highly detailed and finely molded waterline 1/700 scale kit. The kit has never been started. NOTE: contains one complete Z Class Destroyer kit ONLY. There is no second destroyer kit and no aircraft. The one kit has been inventoried complete and includes decals and instructions on the back of the box.
Wood Model Kit, Box Condition: VG
Very rare. This is an early Japanese export kit from TMY in Tokyo, probably dating right around 1960. It was clearly intended for control line operation. The kit has a very high degree of prefabrication for that time, featuring fully cut and ready to assemble plywood fuselage bulkheads, fully cut balsa wing rigs, cut out (but final sanding required) wheels pants, tail planes and all other wood parts, strip wood, formed wire main gear strut, balloon-type main wheels and solid tail wheel, an extensive (still sealed) hardware packet, wood for sheeting, silk covering material (still sealed) and full size plans. The kit has never been started. The internal condition is exceptional; many parts are still attached to the orange factory display board with string; even more are still wrapped with the factory green tape. The kit has been inventoried complete with all parts and plans. It must be shipped insured.
Plastic Model Kit, Box Condition: VG+
From Bandai molds. Very highly detailed, large-scale kit with over 250 parts. Features rolling chassis construction just like the actual car, highly detailed engine, suspension, exhaust, steering linkage and driveline, complete interior with opening front and rear doors, detailed engine compartment and opening hood and more. Molded in black, red, wood tan, clear, butterscotch and with three large trees of chromed parts and rubber tires and ignition wire. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Plastic Model Kit, Box Condition: Sealed Exc++
Still factory sealed. Hard-to-find. This is a completely new kit and it is very cleanly molded and well detailed. Includes paint guide and full decals for multiple aircraft.
Plastic Model Kit, Box Condition: NM++
1960s issue. Never started. Inventoried 100% complete with all parts decals and instructions.
Plastic Model Kit, Box Condition: Sealed Mint
Still factory sealed. Includes detailed truck and 5.5 inch gun kit. Part of the excellent 1/76 Airfix armor range of kits.
Plastic Model Kit, Box Condition: Exc++
Rare first issue with the 1.25 inch high pre-'S' hardbox vs. the later standard size 1.4 inch box. This kit has the correct short-lived 1st issue 2 piece stand as opposed to the later standard 4 piece stand. The early stand with this kit has a base and an arm - the arm has three prongs. This stand was discontinued shortly after introduction as it broke very easily. Inside, the kit is mint. The small parts still sealed in factory cello bag. Never started. Factory sealed bag or inventoried 100% complete with all parts, decals and instructions.
Plastic Model Kit, Box Condition: Sealed Mint
Still factory sealed. 1970s kit is a complete diorama of a Battle of Britain scene. Features every thing shown on the box top including airfield display base, Spitfire model, AEC Tanker and Bedford QL kits and 11 crew.
Vacuform Model Kit, Box Condition: Sealed Mint
Still factory sealed. Basic vac kit with some molded in detail. Comes with alternate parts so you can build the D-IV or the D-III. Certain modeling skills are required to build vacuform kits. Not recommended for beginners. The D-III was renowned for it's incredible rate of climb, but was plagued by engine trouble. The D-IV was designed to have a higher speed in level flight, and in some respects was a better fighter than the famous Fokker D-VII.
Plastic Model Kit, Box Condition: Sealed NM
Still factory sealed. Very highly detailed armor kit.
Vacuform Model Kit, Box Condition: Sealed NM
Features very high quality moldings, better than many injection molded kits. Includes new fuselage, wheels, prop, spinner and canopy for conversion of a P-51D injection molded kit to a P-51H or F-51H. Never started and complete. Please note this requires a base kit (not included). The Airfix P-51D is recommended but you could use the Monogram kit as well.
Plastic Model Kit, Box Condition: Sealed VG+
Still factory sealed but the seal has drawn the box concave. Lodela issue of this rare Neptune variant. This is the classic 'S' kit with ski landing gear and decals for Arctic service.
Plastic Model Kit, Box Condition: VG
1971 release. Features fully detailed cockpit, landing gear, pilot figure and removable cowling to show Rolls Royce Merlin engine. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.
Wood Model Kit, Box Condition: Good++
1970s reissue of the older kit. Kit features traditional wood/tissue construction, quality printwood, stripwood, wire shaft, fully formed and finished wood wheels and thrust button, clear canopy material, rubber, tissue, propeller and detailed full size plans with building instructions. The model has not been started. Inventoried 100% complete. Comet was a famous manufacturer of stick and tissue flying and static models. In the 1930s Great Depression, they lead the low-priced kit revolution with the "Dime Scale" kits and famous advertisements in Model Airplane News magazine and others. Comet reached it's peak in the 1930s when they acquired the services of Carl Goldberg. Goldberg was a highly accomplished modeler with articles in Model Airplane News and famous designs that won him several National level competitions in the 1930s and beyond. (Carl Goldberg went on to found his own company and produced well designed and popular free-flight and RC aircraft). Comet survived the post World War economic slump and continued kit production until they were bought out by long-time competitor Guillow's in 1998.
Plastic Model Kit, Box Condition: Good++
Nice, limited edition injection molded kit. Has decals for at least 6 different aircraft. Well detailed. Never started. Factory sealed bag or inventoried with all parts decals and instructions present.
Multimedia Model Kit, Box Condition: Sealed Exc
This kit is still factory sealed in the clear cello wrap but the seal has splits. Pocher made the finest automobile models ever created. The detail and working parts on these long out-of-production, big 1/8 scale kits is amazing. This kit has 1954 parts of plastic, brass, steel, leather, iron, rubber, copper and many other material. Working features include operating steering, working suspension, lights that operate from the dashboard, doors that open and close with operating door latches and handles, starting handle that operates the crankshaft, connecting rods, pistons, V-belts, Fan, dynamo, etc in the engine. The convertible top operates - and much, much, more more. Recommended for experienced modelers only. NOTE: This is the desirable early version with the most realistic wheel construction. Each wheel is built just like a real spoke wheel with individual spokes and well over 100 parts. Shipping insurance (and Express Mail for international customers) is required.
Plastic Model Kit, Box Condition: Sealed VG++
Still factory sealed but the seal has drawn the box concave. This is one of Renewal's famous Aeroskin kits, and a rare large one in 1/48. Features markings for the aircraft of "High Hat Squadron", VF-1B commander Seligman aboard the USS Saratoga in the early 1930s. The model has an injection molded inner structure of ribs and stringers like a real aircraft, then the modeler covers it with provided authentic pre-colored Aeroskin fabric. There is little painting needed as elaborate finishes are printed directly on the Aeroskin covering. This results a very realistic and colorful model.