Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale.

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Aurora German Gotha G-V Bomber, 1/48, 126-198

Plastic Model Kit,   Box Condition: Exc+

$85   

Ross Abare issue Gotha. Mr. Abare contracted with Aurora to produce a copy of the original 1958 kit. However, the non-'Famous Fighters' logo was used, thus forever separating the Abare issue from the original issue. Mr. Abare was reportedly quite upset, as he wanted exact copies. Never started. The black parts are still in the factory sealed bags. The maroon parts were never sealed and have been inventoried complete. With 'near mint' decals and instructions.

Aurora DeHavilland DH-4, 1/48, 112-98

Plastic Model Kit,   Box Condition: VG++

$49   

First issue dated 1957 with classic Jo Kotula artwork. NOTE: the underside of the fuselage and the underside of one wing has been painted. The quality of the work is good. The paint can be stripped with DOT3 brake fluid or other safe stripper. Inventoried 100% complete with all parts, decals and instructions.

Aurora Bristol F2B Brisfit - (F.2B), 1/48, 113-98

Plastic Model Kit,   Box Condition: VG++

$79   

1957 first issue. Dramatic Jo Kotula artwork. The kit inside is mint and never started. Inventoried 100% complete with all parts, decals and instructions.

Aurora AT-6 Texan, 1/48, 70-79

Plastic Model Kit,   Box Condition: Good

$45   

Dated 1960 but actually later than that because there is no 'Famous Fighters' in the border of the oval logo. The box has light spots over the top. This was a good kit for the time, featuring 'good' cockpit detail, pilot and student figures, rotating prop and USAF decals. Molded in silver and clear. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Aurora Boeing F4B-4 - (F4B4), 1/48, 122-79

Plastic Model Kit,   Box Condition: VG+++

$65   

1958 issue with fantastic Jo Kotula boxart. This is the Parents' Magazine issue with the seal located in the lower right. Classic 1930s Navy Biplane Fighter that is still famous for their colorful paint jobs at that that time. Cowl, tail and trim color would vary with the Aircraft Carrier (Ranger, Lexington or Saratoga) that the group was based on and the aircraft's position in the flight formation. Inventoried 100% complete with all parts, decals and instructions.

Aurora Nieuport II, 1/48, 101-79

Plastic Model Kit,   Box Condition: Exc++

$65   

Second issue still dated 1956 but actually from 1957/58. Jim Cox artwork. The square Northern Lights logo has been replaced with the first famous oval logo sunburst, but the square background remains. Inventoried 100% complete with all parts decals and instructions.

Scale Flight Comet's Great Lakes Trainer - 16 inch Wingspan Dime Scale Flying Airplane, Dime

Wood Model Kit,   Box Condition: NM

$18   

Scale Flight Model Company in Bloomington, Indiana, USA was dedicated to releasing authentic reproductions of the finest "Dime Scale" flying model (stick and tissue) kits from the 1930s/40s. Dime Scale models used to sell for a dime in the 1930's, hence the name. They are actually box scale, but as a general guideline, they usually had a wingspan of 16 inches and have simple and light construction. "Dime Scale" models are now a class flown in some competitions. Kit consists of contest grade printwood, contest quality strip wood, machine cut balsa propeller, the best Japanese tissue, wooden wheels, competition bushed nose plug, brass thrust washers, prop shaft, prop freewheeler, FAI rubber strip motor and a copy of a genuine dime scale plan that was used in the 1930s-1940s. The model has not been started. The parts are either in factory sealed bag(s) or inventoried 100% complete with all parts and instructions.

Scale Flight Comet's Luscombe 50 - 16 inch Wingspan Dime Scale Flying Airplane, Dime

Wood Model Kit,   Box Condition: NM

$18   

Scale Flight Model Company in Bloomington, Indiana, USA was dedicated to releasing authentic reproductions of the finest "Dime Scale" flying model (stick and tissue) kits from the 1930s/40s. Dime Scale models used to sell for a dime in the 1930's, hence the name. They are actually box scale, but as a general guideline, they usually had a wingspan of 16 inches and have simple and light construction. "Dime Scale" models are now a class flown in some competitions. Kit consists of contest grade printwood, contest quality strip wood, machine cut balsa propeller, the best Japanese tissue, wooden wheels, competition bushed nose plug, brass thrust washers, prop shaft, prop freewheeler, FAI rubber strip motor and a copy of a genuine dime scale plan that was used in the 1930s-1940s. The model has not been started. The parts are either in factory sealed bag(s) or inventoried 100% complete with all parts and instructions.

Scale Flight Comet's De Havilland Puss Moth - 16 inch Wingspan Dime Scale Flying Airplane, Dime

Wood Model Kit,   Box Condition: NM

$18   

Scale Flight Model Company in Bloomington, Indiana, USA was dedicated to releasing authentic reproductions of the finest "Dime Scale" flying model (stick and tissue) kits from the 1930s/40s. Dime Scale models used to sell for a dime in the 1930's, hence the name. They are actually box scale, but as a general guideline, they usually had a wingspan of 16 inches and have simple and light construction. "Dime Scale" models are now a class flown in some competitions. Kit consists of contest grade printwood, contest quality strip wood, machine cut balsa propeller, the best Japanese tissue, wooden wheels, competition bushed nose plug, brass thrust washers, prop shaft, prop freewheeler, FAI rubber strip motor and a copy of a genuine dime scale plan that was used in the 1930s-1940s. The model has not been started. The parts are either in factory sealed bag(s) or inventoried 100% complete with all parts and instructions.

Scale Flight Comet's Vought V-141 Pursuit - 16 inch Wingspan Dime Scale Flying Airplane, Dime

Wood Model Kit,   Box Condition: NM

$18   

Scale Flight Model Company in Bloomington, Indiana, USA was dedicated to releasing authentic reproductions of the finest "Dime Scale" flying model (stick and tissue) kits from the 1930s/40s. Dime Scale models used to sell for a dime in the 1930's, hence the name. They are actually box scale, but as a general guideline, they usually had a wingspan of 16 inches and have simple and light construction. "Dime Scale" models are now a class flown in some competitions. Kit consists of contest grade printwood, contest quality strip wood, machine cut balsa propeller, the best Japanese tissue, wooden wheels, competition bushed nose plug, brass thrust washers, prop shaft, prop freewheeler, FAI rubber strip motor and a copy of a genuine dime scale plan that was used in the 1930s-1940s. The model has not been started. The parts are either in factory sealed bag(s) or inventoried 100% complete with all parts and instructions.

Scale Flight AMCO's Curtiss A-3 Falcon - 16 inch Wingspan Dime Scale Flying Airplane, Dime

Wood Model Kit,   Box Condition: NM

$18   

Scale Flight Model Company in Bloomington, Indiana, USA was dedicated to releasing authentic reproductions of the finest "Dime Scale" flying model (stick and tissue) kits from the 1930s/40s. Dime Scale models used to sell for a dime in the 1930's, hence the name. They are actually box scale, but as a general guideline, they usually had a wingspan of 16 inches and have simple and light construction. "Dime Scale" models are now a class flown in some competitions. Kit consists of contest grade printwood, contest quality strip wood, machine cut balsa propeller, the best Japanese tissue, wooden wheels, competition bushed nose plug, brass thrust washers, prop shaft, prop freewheeler, FAI rubber strip motor and a copy of a genuine dime scale plan that was used in the 1930s-1940s. The model has not been started. The parts are either in factory sealed bag(s) or inventoried 100% complete with all parts and instructions.

Scale Flight Hawker Hurricane - 16 inch Wingspan Dime Scale Flying Airplane, Dime

Wood Model Kit,   Box Condition: NM

$18   

Scale Flight Model Company in Bloomington, Indiana, USA was dedicated to releasing authentic reproductions of the finest "Dime Scale" flying model (stick and tissue) kits from the 1930s/40s. Dime Scale models used to sell for a dime in the 1930's, hence the name. They are actually box scale, but as a general guideline, they usually had a wingspan of 16 inches and have simple and light construction. "Dime Scale" models are now a class flown in some competitions. Kit consists of contest grade printwood, contest quality strip wood, machine cut balsa propeller, the best Japanese tissue, wooden wheels, competition bushed nose plug, brass thrust washers, prop shaft, prop freewheeler, FAI rubber strip motor and a copy of a genuine dime scale plan that was used in the 1930s-1940s. The model has not been started. The parts are either in factory sealed bag(s) or inventoried 100% complete with all parts and instructions.

Scale Flight Comet's Heath LNS-4 Parasol - 16 inch Wingspan Dime Scale Flying Airplane, Dime

Wood Model Kit,   Box Condition: NM

$18   

Scale Flight Model Company in Bloomington, Indiana, USA was dedicated to releasing authentic reproductions of the finest "Dime Scale" flying model (stick and tissue) kits from the 1930s/40s. Dime Scale models used to sell for a dime in the 1930's, hence the name. They are actually box scale, but as a general guideline, they usually had a wingspan of 16 inches and have simple and light construction. "Dime Scale" models are now a class flown in some competitions. Kit consists of contest grade printwood, contest quality strip wood, machine cut balsa propeller, the best Japanese tissue, wooden wheels, competition bushed nose plug, brass thrust washers, prop shaft, prop freewheeler, FAI rubber strip motor and a copy of a genuine dime scale plan that was used in the 1930s-1940s. The model has not been started. The parts are either in factory sealed bag(s) or inventoried 100% complete with all parts and instructions.

Scale Flight Comet's Spitfire - 16 inch Wingspan Dime Scale Flying Airplane, Dime

Wood Model Kit,   Box Condition: NM

$18   

Scale Flight Model Company in Bloomington, Indiana, USA was dedicated to releasing authentic reproductions of the finest "Dime Scale" flying model (stick and tissue) kits from the 1930s/40s. Dime Scale models used to sell for a dime in the 1930's, hence the name. They are actually box scale, but as a general guideline, they usually had a wingspan of 16 inches and have simple and light construction. "Dime Scale" models are now a class flown in some competitions. Kit consists of contest grade printwood, contest quality strip wood, machine cut balsa propeller, the best Japanese tissue, wooden wheels, competition bushed nose plug, brass thrust washers, prop shaft, prop freewheeler, FAI rubber strip motor and a copy of a genuine dime scale plan that was used in the 1930s-1940s. The model has not been started. The parts are either in factory sealed bag(s) or inventoried 100% complete with all parts and instructions.

Scale Flight Spartan Executive (Fighter) - 20 inch Wingspan Dime Scale Flying Airplane, Dime

Wood Model Kit,   Box Condition: NM

$18   

Scale Flight Model Company in Bloomington, Indiana, USA was dedicated to releasing authentic reproductions of the finest "Dime Scale" flying model (stick and tissue) kits from the 1930s/40s. Dime Scale models used to sell for a dime in the 1930's, hence the name. They are actually box scale, but as a general guideline, they usually had a wingspan of 16 inches and have simple and light construction. "Dime Scale" models are now a class flown in some competitions. Kit consists of contest grade printwood, contest quality strip wood, machine cut balsa propeller, the best Japanese tissue, wooden wheels, competition bushed nose plug, brass thrust washers, prop shaft, prop freewheeler, FAI rubber strip motor and a copy of a genuine dime scale plan that was used in the 1930s-1940s. The model has not been started. The parts are either in factory sealed bag(s) or inventoried 100% complete with all parts and instructions.

Scale Flight Comet's Curtiss Robin - 16 inch Wingspan Dime Scale Flying Airplane, Dime

Wood Model Kit,   Box Condition: NM

$18   

Scale Flight Model Company in Bloomington, Indiana, USA was dedicated to releasing authentic reproductions of the finest "Dime Scale" flying model (stick and tissue) kits from the 1930s/40s. Dime Scale models used to sell for a dime in the 1930's, hence the name. They are actually box scale, but as a general guideline, they usually had a wingspan of 16 inches and have simple and light construction. "Dime Scale" models are now a class flown in some competitions. Kit consists of contest grade printwood, contest quality strip wood, machine cut balsa propeller, the best Japanese tissue, wooden wheels, competition bushed nose plug, brass thrust washers, prop shaft, prop freewheeler, FAI rubber strip motor and a copy of a genuine dime scale plan that was used in the 1930s-1940s. The model has not been started. The parts are either in factory sealed bag(s) or inventoried 100% complete with all parts and instructions.

Scale Flight Comet's Farman Stratoplane - 16 inch Wingspan Dime Scale Flying Airplane, Dime

Wood Model Kit,   Box Condition: NM

$18   

Scale Flight Model Company in Bloomington, Indiana, USA was dedicated to releasing authentic reproductions of the finest "Dime Scale" flying model (stick and tissue) kits from the 1930s/40s. Dime Scale models used to sell for a dime in the 1930's, hence the name. They are actually box scale, but as a general guideline, they usually had a wingspan of 16 inches and have simple and light construction. "Dime Scale" models are now a class flown in some competitions. Kit consists of contest grade printwood, contest quality strip wood, machine cut balsa propeller, the best Japanese tissue, wooden wheels, competition bushed nose plug, brass thrust washers, prop shaft, prop freewheeler, FAI rubber strip motor and a copy of a genuine dime scale plan that was used in the 1930s-1940s. The model has not been started. The parts are either in factory sealed bag(s) or inventoried 100% complete with all parts and instructions.

Scale Flight Allied Sport - 20 inch Wingspan Dime Scale Flying Airplane, Dime

Wood Model Kit,   Box Condition: NM

$18   

Scale Flight Model Company in Bloomington, Indiana, USA was dedicated to releasing authentic reproductions of the finest "Dime Scale" flying model (stick and tissue) kits from the 1930s/40s. Dime Scale models used to sell for a dime in the 1930's, hence the name. They are actually box scale, but as a general guideline, they usually had a wingspan of 16 inches and have simple and light construction. "Dime Scale" models are now a class flown in some competitions. Kit consists of contest grade printwood, contest quality strip wood, machine cut balsa propeller, the best Japanese tissue, wooden wheels, competition bushed nose plug, brass thrust washers, prop shaft, prop freewheeler, FAI rubber strip motor and a copy of a genuine dime scale plan that was used in the 1930s-1940s. The model has not been started. The parts are either in factory sealed bag(s) or inventoried 100% complete with all parts and instructions.

Scale Flight Harlow Low Wing Monoplane - 16 inch Wingspan Dime Scale Flying Airplane, Dime

Wood Model Kit,   Box Condition: NM

$18   

Scale Flight Model Company in Bloomington, Indiana, USA was dedicated to releasing authentic reproductions of the finest "Dime Scale" flying model (stick and tissue) kits from the 1930s/40s. Dime Scale models used to sell for a dime in the 1930's, hence the name. They are actually box scale, but as a general guideline, they usually had a wingspan of 16 inches and have simple and light construction. "Dime Scale" models are now a class flown in some competitions. Kit consists of contest grade printwood, contest quality strip wood, machine cut balsa propeller, the best Japanese tissue, wooden wheels, competition bushed nose plug, brass thrust washers, prop shaft, prop freewheeler, FAI rubber strip motor and a copy of a genuine dime scale plan that was used in the 1930s-1940s. The model has not been started. The parts are either in factory sealed bag(s) or inventoried 100% complete with all parts and instructions.

Scale Flight North American NJ-1 - 20 inch Wingspan Dime Scale Flying Airplane, Dime

Wood Model Kit,   Box Condition: NM

$18   

Scale Flight Model Company in Bloomington, Indiana, USA was dedicated to releasing authentic reproductions of the finest "Dime Scale" flying model (stick and tissue) kits from the 1930s/40s. Dime Scale models used to sell for a dime in the 1930's, hence the name. They are actually box scale, but as a general guideline, they usually had a wingspan of 16 inches and have simple and light construction. "Dime Scale" models are now a class flown in some competitions. Kit consists of contest grade printwood, contest quality strip wood, machine cut balsa propeller, the best Japanese tissue, wooden wheels, competition bushed nose plug, brass thrust washers, prop shaft, prop freewheeler, FAI rubber strip motor and a copy of a genuine dime scale plan that was used in the 1930s-1940s. The model has not been started. The parts are either in factory sealed bag(s) or inventoried 100% complete with all parts and instructions.